• Journal of Periodontal and Implant Science
• /
• v.32 no.3
• /
• pp.489-500
• /
• 2002

The purpose of this study was to evaluate newly fabricated tricalcium phosphate(TCP)/chitosan microgranuls as bone substitutes. TCP/chitosan microgranules were fabricated by dropping TCP-chitosan suspension into the NaOH/ethanol solution. The size of microgranules could be controllable via airflow rate. PDGF-BB was loaded into the fabricated granules via freeze-drying methods(300 ng/20 mg). To evaluate cell proliferation, cultured osteoblasts cell lines(MC3T3-El) was dropped on the BioOss(R), chitosan microgranules, TCP/chitosan microgranules and cultured for 1, 7 , 14, and 28 days. Scanning electron microscopic observation was done after 7 days of culture and light microscopic examination was done after 28 days of culture. PDGF-BB release from the microgranules was tested. Rabbit calvarial defects(8 mm in diameter) were formed and chitosan, TCP/chitosan, PDGF-TCP/chitosan microgranules, and BioGran(R) were grafted to test the ability of new bone formation. At SEM view, the size of prepared microgranules was 250-1000 um and TCP powders were observed at the surface of TCP/chitosan microgranules. TCP powders gave roughness to the granules and this might help the attachment of osteoblasts. The pores formed between microgranules might be able to allow new bone ingrowth and vascularization. There were no significant differences in cell number among BioOss(R) and two microgranules at 28 day. Light and scanning electron microscopic examination showed that seeded osteoblastic cells were well attached to TCP/chitosan microgranules and proliferated in a multi-layer. PDGF-BB released from TCP/chitosan microgranules was at therapeutic concentration for at least 1 week. In rabbit calvarial defect models, PDGF-TCP/chitosan microgranules grafted sites showed thicker bone trabeculae pattern and faster bone maturation than others. These results suggested that the TCP/chitosan microgranules showed the potential as bone substitutes.

• Journal of Embryo Transfer
• /
• v.13 no.3
• /
• pp.227-233
• /
• 1998

The aim of these experiments was to investigate the effects of oviduct epithelial cells on bovine in vitro fertilization. Oviduct epithelial cell monolayers (OEC) on the 4-well dish were prepared according to general procedures. Monolayers were formed within 5days. The medium for OEC culture (TCM199 with 10% FBS) was replaced with IVF-TALP 2h before each experiment. Macromolecules/proteins from oviductal conditioned medium (OM) were recovered by ultrafiltration, which desalted and concentrated macromolecules greater than 5kDa, and this OM were added to W medium (experiment 1). The cleavage rate in OM+OEC group was significantly higher than in OM group (p〈0.01). In this experiment 2, oocytes were inseminated on OEC with sperm which had been pre-incubated with OEC for 0 or 4h before insemination. In this experiment, oocytes were exposed to sperm only 8 h for clarifying the effect. After insemination, oocytes were cultured in CRlaa. At 42 h post insemination, oocytes were denuded and examined for evidence of cleavage. The cleavage rates of oocytes which were inseminated with OEC treated sperm for 4 h were significantly higher than those of the other group (p〈0.01). In conclusion, sperm released from OEC have more fertilizing ability than those before attachment.

• Journal of Wetlands Research
• /
• v.20 no.2
• /
• pp.145-154
• /
• 2018

In this study, three pilot-scale wetland systems were built for treating stormwater runoff from asphalt road. Each of the system consists of a settling tank and a vertical flow wetland packed with 25%, 50%, and 75% woodchip as treatment media. According to the analysis of the distributions of particle size, it was found that solids ranging in size $0.52-30{\mu}m$ were predominant in the stormwater runoff. After 24-hours settling, those coarser than $20{\mu}m$ were significantly detained. Further retention, especially for the finer-sized fraction, occurred in the wetland through internal recirculation during the dry day periods. As a primary media of the wetland, woodchip showed a high filtration and attachment capacity for the particulates in pre-settled stormwater, whereas overall amount of solids in the wetland effluent increased due to the detachment of woody elements from the media. This was observed mainly during the initial 75 days of operation, and the size and detachment rate were found to be strongly related with the woodchip packing ratio. The mechanism involving woody particle detachment was modeled as a first-order form. In addition, water quality factors and operational parameters affecting the detachment were analyzed and discussed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.8
• /
• pp.4736-4741
• /
• 2014

This study examined PCB component cleaning on a PCB component surface, which has defects of precipitation type washing (existing rinse method), sealant and foreign material formed in the adhesive process that could not be removed easily. The spin jig was developed for PCB component cleaning, in which the PCB component settled down, to solve the conventional problem of the removal of foreign material with the centrifugal force by high speed rotation. The results are as follows. With decreasing fraction defect in PCB component washing, the development and substrate damage decreased by more than 80% according to the abstergent in the rotary type using the centrifugal force in the existing precipitation type. When the base plate showed a large difference with the time to include the process after washing the design using the existing method, easy attachment and separation of the PCB component could be possible. The washing time was enhanced 90% compared to the existing time. The reliability of the security and washing collaboration of the design and stability of the cleaning process could be secured so that there was no phenomenon of secession, the PCB component fixed for a cleansing rotation jig could maintain a fixed force by the centrifugal force. The stability and reliability of the washing process and the defective rate could be improved to less than 1%.

• Polymer(Korea)
• /
• v.35 no.1
• /
• pp.7-12
• /
• 2011

Poly(lactic-co-glycolic acid) (PLGA) is a biodegradable synthetic polymer with acceptable mechanical strength and well-controlled degradation rate. Also, it can be easily fabricated into many shapes. Silk fibroin contains powerful bioactive molecules. We fabricated natural/synthetic hybrid films using 0, 10, 20, 40 and 80 wt% of silk fibroin. Schwann cells (SCs) were seeded on PLGA/silk fibroin hybrid films and confirmed the effects of adhesion and proliferation on SCs according to the content of silk fibroin. In this study, we confirmed PLGA/silk fibroin hybrid film containing 40% and 80% of silk fibroin interrupted adhesion and proliferation of SCs. Films containing 10% and 20% of silk, however, provided suitable environment for growth and proliferation of SCs. These results suggest that silk fibroin provides suitables surface to neural cells and its proper content provides proper culture conditions to improve cell adhesion and proliferation.

• Polymer(Korea)
• /
• v.37 no.2
• /
• pp.127-134
• /
• 2013

The vascular endothelial cells are the inner layers of blood vessels. It regulates the function of blood vessels and proliferation of vascular smooth muscle cells. Poly(lactide-co-glycolic acid) (PLGA) is a biodegradable synthetic polymer with a well-controlled degradation rate and an acceptable mechanical strength. It can be easily fabricated into many shapes. Silk consists of 18 amino acids. It found important for attaching cells cultured in vitro, and maintaining cell functions. In this study, we fabricated silk/PLGA biomaterial hybrid films of 0, 10, 20, 40 and 80 wt% silk. We performed MTT, SEM, ELISA, and immunocytochemistry analyses. We confirmed the adhesion and the proliferation of HAECs on silk/PLGA according to the content of silk, and 40 wt% silk/PLGA hybrid films have superior adhesion and proliferation properties. These results demonstrate that silk/PLGA hybrid films provide suitable surfaces for HAECs, and there is the effect of silk on cell growth and proliferation.

• Journal of Periodontal and Implant Science
• /
• v.36 no.1
• /
• pp.27-37
• /
• 2006

Although the main purpose of periodontal treatment to regenerate is the complete regeneration of periodontal tissue due to periodontal disease, most of the treatment cannot meet such purpose because healing by long epithelial junction. Therefore, diverse materials of resorbable and non-resorbable have been used to regenerate the periodontal tissue. Due to high risk of exposure and necessity of secondary surgical procedure when using non-resorbable membrane, guided tissue regeneration using the resorbable membrane has gain popularity, recently. However, present resorbable membrane has the disadvantage of not having sufficient time to regenerate date to the difference of resorption rate according to surgical site. Meanwhile, other than the structure stability and facile manipulation, acellular dermal matrix has been reported to be a possible scaffold for cellular proliferation due to rapid revascularization and favorable physical properties for cellular attachment and proliferation. The purpose of this study is to estimate the influence of acellular dermal matrix on periodontal ligament, cementum and alveolar bone when acellular dermal matrix is implanted to 1-wall alveolar bone defect. 4 dogs of 12 to 16 month old irrelevant to sex , which below 15Kg of body weight, has been used in this study. ADM has been used for the material of guided tissue regeneration. The 3rd premolar of the lower jaw was extracted bilaterally and awaited for self-healing. subsequently buccal and lingual flap was elevated to form one wall intrabony defect with the depth and width of 4mm on the distal surface of 2nd premolar and the mesial surface of 4th premolar. After the removal of periodontal ligament by root planing. notch was formed on the basal position. Following the root surface treatment, while the control group had the flap sutured without any treatment on surgically induced intrabony defect. Following the root surface treatment, the flap of intrabony defect was sutured with the ADM inserted while the control group sutured without any insertion. The histologic specimen was observed after 4 and 8 weeks of treatment. The control group was partially regenerated by periodontal ligament, new cementum and new alveolar bone. the level of regeneration is not reached on the previous formed notch. but, experimental group was fully regenerated by functionally oriented periodontal ligament fiber. new cementum and new alveolar bone. In conclusion, we think that ADM seems to be used by scaffold for periodontal ligament cells and the matrix is expected to use on guided tissue regeneration.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.2
• /
• pp.119-125
• /
• 2015

A concentration meter is widely used at purification plants, sewage treatment plants and waste water treatment plants to sort and transfer high concentration sludge and to control the amount of chemical dosage. When the strange substance is contained in the sludge, however, the attenuation of ultrasonic wave could be increased or not be transmitted to the receiver. At that case, the value of concentration meter is higher than the actual density value or vibrated up and down. It has also been difficult to automate the residuals treatment process according to the problems as sludge attachment or damage of a sensor. Multi-beam ultrasonic concentration meter has been developed to solve these problems, but the failure of the ultrasonic beam of a specific concentration measurement value degrade the performance of the entire system. This paper proposes the method to improve the accuracy of sludge concentration rate by choosing reliable sensor values and learning them by proposed algorithm. The prediction algorithm is chosen as neuro-fuzzy model, which is tested by the various experiments.

• Korean Journal of Environmental Biology
• /
• v.35 no.4
• /
• pp.670-676
• /
• 2017

Recently, mass mortality of the young abalone Haliotis discus hannai has occurred in commercial seed production farms in Korea. The mortality rate was above 50% of the total cultured organisms in the farm, and the shell length of the moribund organisms was about 3cm. The mortal phenomenon was that the young abalones were weakly scattered on the bottom of the pond from the attachment matrix, or that they could not be moved back to their normal positions. The diseased farmed Pacific abalone had abdominal edema. From the edema in the moribund individuals, three bacterial strains were isolated and all the strains were identified as Vibrio harveyi. These strains were compared with thirty six strains isolated from the fish. The results was that the Vibrio harveyi from the fish were sorted into genogroup A or B; however, the three strains of the diseased farmed Pacific abalone were sorted into genogroup A and the new genogroup C. The identical mortality and pathological symptoms of the naturally infected organisms were reproduced by artificial infection with WA AG-1 and WA CS-5 strains. The $LD_{50}$ of WA AG-1 and WA CS-5 were each $1.0{\times}10^3cfu\;animal^{-1}$ and $1.7{\times}10^4cfu\;animal^{-1}$.

• Korean Journal of Social Welfare Studies
• /
• v.40 no.3
• /
• pp.377-406
• /
• 2009

This study used laten class growth analysis to identify discrete developmental patterns of delinquent behaviors in adolescence. This present article also examined associations among these trajectories to determine how the development of delinquent behaviors relates to protective and risk factors, which include parental monitoring, attachment with parent, association with deviant peers, self-control, and negative stigma from others. Four-wave panel data from a Korea Youth Panel Study were used for the latent class growth model analysis. The sample consisted of 3,446 adolescents who were assessed at 4 measurement waves with approximately 1-year interval. Four trajectories of delinquent behaviors emerged: delinquency persistence, delinquency increaser, delinquency decreaser, normative group(almost no delinquent behaviors). Association with deviant peers had the most proximal strong influence on the probability of being in the delinquency increaser and delinquency persistence group compared, noed to the normative group. Parental monitoring, self-efficacy and negative stigma also differentiated the four delinquent behavior trajectories from one another after controllig for socio-demographic variables. The study suggested that there is a significant heterogeneity in the timing and change rate of delinquency progression. Adolescent delinquency prevention and intervention programs will need to consider this heterogeneity and enhance attention to protective and risk factors depending on the subpopulation.