• Title/Summary/Keyword: attached-type

Search Result 1,072, Processing Time 0.027 seconds

Affixation effects on word-final coda deletion in spontaneous Seoul Korean speech

  • Kim, Jungsun
    • Phonetics and Speech Sciences
    • /
    • v.8 no.4
    • /
    • pp.9-14
    • /
    • 2016
  • This study investigated the patterns of coda deletion in spontaneous Seoul Korean speech. More specifically, the current study focused on three factors in promoting coda deletion, namely, word position, consonant type, and morpheme type. The results revealed that, first, coda deletion frequently occurred when affixes were attached to the ends of words, rather than in affixes in word-internal positions or in roots. Second, alveolar consonants [n] and [l] in the coda positions of high-frequency affixes [nɨn] and [lɨl] were most likely to be deleted. Additionally, regarding affix reduction in the word-final position, all subjects seemed to depend on this articulatory strategy to a similar degree. In sum, the current study found that affixes without primary semantic content in spontaneous speech tend to undergo the process of reduction, favoring the occurrence of specific pronunciation variants.

Design and Fabrication of a Low Frequency Vibration Driven High-Efficiency Electromagnetic Energy Harvester (저 주파수용 FR-4 스프링 기반 고효율 진동형 전자기식 에너지 하베스터의 설계 및 제작)

  • Lee, Byung-Chul;Chung, Gwiy-Sang
    • Journal of Sensor Science and Technology
    • /
    • v.21 no.4
    • /
    • pp.298-302
    • /
    • 2012
  • This paper describes the design and fabrication of a low frequency vibration driven high-efficiency electromagnetic energy harvester based on FR(Flame Resistance)-4 spring which converts mechanical energy into useful electrical power. The fabricated generator consists of a vertically polarized NdFeB permanent magnet attached to the center of spring and a planar type copper coil which has higher efficiency compare with cylindrical type coil. ANSYS finite analysis and Matlab were used to determine the resonance frequency and output power. The generator is capable of producing up to 1.36 $V_{pp}$ at 9 Hz, which has the maximum power of 639 ${\mu}W$ with a load resistance of $3.25k{\Omega}$.

Comparison of vibration and noise of higher utility factor Insulation Panel for Transformer (변압기용 고효율 차음판의 진동 및 소음 비교)

  • Jeong, J.H.;Lee, J.H.;Jeong, H.E.;Lim, D.S.;Kim, J.;Choi, B.K.
    • Proceedings of the Korean Society for Noise and Vibration Engineering Conference
    • /
    • 2007.11a
    • /
    • pp.112-116
    • /
    • 2007
  • Highly damped insulation panel for transformer construction is needed in residential area because the making noise from transformer substation in inner city is appeared a lost of problem by increasing to conserve living environment. Therefor in this paper, the vibration and noise characteristic effect of cork-type and sponge-type that is attached between insulation panel and enforce beam in transformer is analized using real size transformer experimentally.

  • PDF

Design and Analysis of a Linear Motor for Slim-line ODD (소형 광디스크 드라이브용 선형 구동기의 설계 및 특성 해석)

  • Shim, Min-Taek;Park, Joon-Hyuk;Baek, Yoon Su
    • Proceedings of the Korean Society for Noise and Vibration Engineering Conference
    • /
    • 2002.11b
    • /
    • pp.794-798
    • /
    • 2002
  • This paper deals with a moving coil type linear motor for fast access of the miniature ODD. This slim-line motor is composed of the mover supported by guide mechanism, the coil wound into it, and the yoke attached to the permanent magnet for stator. The driving force is generated by the PM of the stator and the current in the coils of the mover. Magnetic circuit analysis and Finite Element Method are applied to estimate the thrust force at air gap. In order to compare the force characteristics between two methods, various experiment results are applied to verify on a prototype. Also the flexible modes of the motor are predicted through the FEM and the structural components are modified to locate this on high frequency region.

  • PDF

Development of a Power-tiller TMF Mixer (동력경운기 견인형 TMF 배합기의 개발)

  • Jo, Gi-Hyeon;Lee, Jeong-Taek;Baek, Lee
    • Journal of Biosystems Engineering
    • /
    • v.28 no.2
    • /
    • pp.97-106
    • /
    • 2003
  • One of the obstructing factors against managing dairy fm has been heavy labor requirement for feeding dairy cows. A Power-tiller TMF mixer was developed to reduce the cost and to provide economic benefit. The TMF mixer was desisted by the feeding capacity of 20∼30 heads at a batch with various functioning systems of auger type mixer, delivery conveyer, weighing console, pipe heater type heating system, power transmission train and mounting trailer. According to the study resulted, it showed that 1,200rpm, 1,600rpm, 2,000rpm and 2,300rpm were 6ps. Bps, lops and 12ps respectively. and that reduced shaft output by 15%. On the fodder mixer attached powertiller, initial output was necessary large torque. And the heating system was maintaining uniform temperature 60$^{\circ}C$ relatively.

A Photometric Study of the W UMa-type Contact Binary GX Aurigae

  • Park, Jang-Ho;Kim, Chun-Hwey;Lee, Jae-Woo
    • Bulletin of the Korean Space Science Society
    • /
    • 2008.10a
    • /
    • pp.29.2-29.2
    • /
    • 2008
  • The CCD photometric observations of the W UMa type contact binary GX Aur were performed for 33 nights from 2004 to 2008 using a 2K CCD camera and Johnson BVRI filter system attached to the 61cm reflector at Sobaeksan Optical Astronomy Observatory (SOAO). From our observations, the first BVRI light curves of GX Aur were completed and eight new times of minima (primary: 4, secondary: 4) were obtained. All the times of minima including our timings were collected and analyzed to see the dynamical behavior of GX Aur system. Intensive analysis of our BVRI lightcurves with the recent Wilson-Devinney binary model shows that GX Aur is an over-contact binary whose component stars have equal mass and time-variable spots.

  • PDF

The Structure and Type of Scientific Hypotheses on Zoological Tasks as Generated by Prospective Elementary School Teachers (동물학 과제에서 초등학교 예비 교사들이 생성한 과학적 가설의 구조와 유형)

  • Jeong, Jin-Su
    • Journal of Korean Elementary Science Education
    • /
    • v.26 no.2
    • /
    • pp.201-208
    • /
    • 2007
  • The purpose of this study was to analyze the structure and type of prospective elementary school teachers' scientific hypotheses generated on zoological tasks. The subjects were 18 prospective elementary school teachers. Four zoological hypothesis generation tasks were developed and administered to the subjects. After being presented with the zoological situations of the tasks, the subjects were asked to generate causal questions and scientific hypotheses. The scientific hypotheses were analyzed by the inductive approach. The results of this study showed that the hypotheses contained explicans and explicanda. The explicans were divided into two parts: 'what' and 'how'. In some cases, additional explanations were attached to the 'what' section. In addition, the hypotheses were classified into 9 types. The number of explicanda, the pattern of explicans, and the number of explicans were used as criteria for classification purposes. This study also discussed the implications of these findings for future directions in teaching and teaming in science education.

  • PDF

SPECTROSCOPIC STUDY OF ACTIVE PROMINENCE (활동홍염의 분광분석 연구)

  • PARK YOUNG DEUK;YUN HONG SIK;MOON YONG-JAE
    • Publications of The Korean Astronomical Society
    • /
    • v.13 no.1 s.14
    • /
    • pp.1-16
    • /
    • 1998
  • A quantitative analysis has been made to estimate the horizontal variation of physical parameters in a loop type active prominence by analyzing Call H&K and $H_{\varepsilon}{\ldots}$ spectra taken from such an active prominence (appeared on May 23, 1981 with position angle 251 degree) with Littrow type spectrograph attached to 25cm coronagraph at Norikura Coronal Station of National Astronomical Observatory of Japan. The spectral resolution is 1.12A/mm and the spatial resolution is 25'/mm for Call H&K lines. The present study shows that the turbulent velocity ranges from 10km/s to 20 km/s in the loop prominence, which are in good agreement with those of Hirayama (1989). It is also found that the temperature of the loop prominence is higher than that of quiescent prominences$(\~8,000 K)$ by about 4,000 K, whose temperature deviation seems very high.

  • PDF

Simulation of Magnetic Field and Removal Characteristic of Nitrogen Oxide Using Wire-Plate Type Plasma Reactor (선 대 평판형 플라즈마 반응기를 이용한 자계 시뮬레이션과 질소산화물제거 특성)

  • 이현수;박재윤
    • The Transactions of the Korean Institute of Electrical Engineers C
    • /
    • v.52 no.9
    • /
    • pp.407-411
    • /
    • 2003
  • The purpose of this paper is to study the removal of nitrogen oxide(NOx) using a wire-plate type plasma reactor with magnet attached for indoor air purification. In order to produce a more effective reactor, we conducted magnetic field simulations. The results of the magnetic field simulations show that NOx can be removed more effectively. The results from the magnetic field simulation show that when 7 magnets were applied to the reactor, the magnetic flux density was at its highest amount than when using 0, 3, or 5 magnets. From the data obtained by the simulation results a plasma reactor was made and thus, several experiments were conducted. The best removal efficiency was obtained with 14 W AC power to the reactor with 5 magnets.

A Study of Substrate Removal in Wastewater Flow Variations by Submerged Biofilm Reactor (浸漬型 生物膜反應槽에 의한 負荷變動에서의 基質除去에 관한 연구)

  • Nam, Chul-Hyun;Park, Jong-Woong
    • Journal of Environmental Health Sciences
    • /
    • v.13 no.2
    • /
    • pp.83-90
    • /
    • 1987
  • The objective of this study is to review the basic theories related substrate removal in wastewater flow variations using submerged biofilm reactor. An aerated biofilm reactor is that in which influent organic substrates are aerobically oxidized by the microorganisms of biofilm grown on the surface of submerged media. No sludge is returned, and oxygen is supplied by diffusers. Three types of aerated biofilm reactor are one stage-central aeration, one stageup flow aeration and two stage-side aeration. The orders of substrate removal capacity in wastewater flow variations showed two stage-side aeration, one stage-upflow aeration and one stage-central aeration. The phenonmenon of nonclosing volid in upflow aeration type was superior to these in central-side aeration type. Attached biofilm masses in case of upflow, side and central aeration reactor were 1.0mg/cm$^2$, 4.1 mg/cm$^2$ and 0.93 mg/cm$^2$, respectively. Yield coefficient for biofilm was 0.31 to 0.48. Especially, removal efficiency can be increased remarkably according to the number of biofilm reactor and the packed condition of media.

  • PDF