• 대한토목학회논문집
• /
• 제42권3호
• /
• pp.311-322
• /
• 2022

본 연구에서는 분포형 광섬유 시트와 탄소섬유 시트를 콘크리트 표면에 부착하여 철근 콘크리트를 사용하는 구조물의 보강 효과 및 BOTDR 센서를 활용한 상태 평가를 4점 휨 실험을 통해 수행하였다. 부착 정도에 따른 보강 효과를 확인하기 위하여 탄소섬유 시트의 부착 형태를 다양하게 제작하였으며, BOTDR 센서의 활용성을 확인하기 위하여 실험체에 다수의 전기저항식 변형률 게이지를 부착하여 BOTDR 센서의 변형률과 비교하였다. 실험 결과를 살펴보면, 우선 CFRP시트 부착 정도에 따른 보강 효과에 분명한 차이가 나타나는데, 이는 부착 면적보다는 부착 형태에 더 영향을 받는 것으로 확인되었다. BOTDR 센서로부터 계측된 변형률로부터 하중 증가에 따른 철근 콘크리트 실험체의 구조적 거동을 시각화 할 수 있었으며, CFRP 보강 부위에서 하중이 집중되는 것을 알 수 있다. BOTDR 센서에서 계측된 변형률이 전기저항식 게이지로부터 계측된 변형률과 유사하게 계측되는 것을 알 수 있는데, 이를 통해 대형 토목 구조물의 전체적 거동을 분석하는데 BOTDR 센서가 효과적일 수 있음을 확인하였다. 다시 말해서, 국부적 변형률을 측정하는 전기식 변형률 게이지로 계측을 하면 계측 오차는 상당할 수 있는 반면에, 분포형으로 측정되는 BOTDR 센서는 이러한 문제를 줄일 수 있는 대안으로 판단된다. 마지막으로, CFRP 시트 탈락이 발생되는 부분에서 계측 BOTDR 센서 변형률이 높게 나타나는데 이를 활용하면 CFRP 시트의 국부적 손상 위치를 효율적으로 추적할 수 있을 것으로 판단된다.

• 치과방사선
• /
• 제21권2호
• /
• pp.297-306
• /
• 1991

The purpose of this study is to improve the availabilities of radiographic technics as diagnostic methods to evaluate maxillary sinus in dental clinic. For the morphologic study of maxillary sinus, 20 dry maxillas were used and intraoral standard views, orthopantomograms, and skull P-A views were taken. For measuring the vertical image magnification rates, 5 sites in maxillary molar regions of 5 dry mandibles were selected radndomly and 25 wires of the determined sizes for selected portions were attached to the sites, after then, intraoral radiograms with bisecting technic and orthopantomograms were taken. The acquired results were as follows: 1. The anterior extension of the maxillary sinus on orthopantomogram was the distal side of the canine in 45.45% of subjects, the mesial side of the canine in 27.27%, the lateral incisor in 9.09%, the mesial side of the 1st premolar in 9.09%, and the mesial side of the 2nd pre-molar in 9.09%. 2. The positional relationship between the floor of maxillary sinus and the apex of alveolar socket revealed superimposed type in 58.3% of subjects, approached type in 33.3%, and separated type in 8.4%. 3. The morphology of inferior border of maxillary sinus was simple V or U shape in edentulous stage and V or wide U shape in alveolar socket stage. 4. The vertical image length on intraoral film taken by bisecting technic was magnified by 27.23% on the average and the length on orthopantomogram by 12.35%. 5. The inferior borders of maxillary sinus coinciding with each of the areas bearing the anterior and the posterior teeth on skull P-A view were determined.

• 전기학회논문지
• /
• 제63권4호
• /
• pp.495-501
• /
• 2014

Piezoresistive-type, capacitive-type, and optical-type sensors have mainly been used for measuring a strain. However, in building a sensor network for remote monitoring using these conventional sensors there are disadvantages such as the complexity of a measuring system including wireless communication circuitry and high cost. In this paper, we demonstrates a highly-sensitive surface acoustic wave (SAW) strain sensor which is advantageous to harsh environments and wireless network. We designed and fabricated the SAW strain sensor. The SAW strain sensor attached on a specimen was tested with a tensile tester. The strain on the sensor surface was measured with a commercial strain gauge and compared with that obtained from strain analysis. The central frequency shift of the SAW sensor was measured with a network analyzer. The sensitivity of the SAW strain sensor is 134 $Hz/{\mu}{\varepsilon}$ which is high compared to previous results.

• 한국전산구조공학회논문집
• /
• 제29권2호
• /
• pp.131-140
• /
• 2016

최근 강풍으로 인한 옥외광고물의 파손 및 추락으로 인해 불특정 다수에게 인적 및 물적 피해를 야기하고 있다. 옥외광고물은 사유시설과 공공시설물의 성격을 모두 갖기 때문에 옥외광물로 인한 피해를 저감하는 것은 개인의 노력뿐 아니라 제도 및 규정을 통해서도 이루어져야한다. 이러한 피해는 강풍에 취약한 옥외광고물의 내풍설계 기준의 미비가 가장 큰 요인으로 인식되고 있어 본 연구에서는 옥외광고물의 내풍설계 표준을 제시하였다. 이를 위해 풍속에 영향을 주는 옥외광고물 설치위치의 주변 풍환경이나 높이, 설치위치 등 풍속과 관련한 요소를 반영하였으며, 건축구조기준 2015(안)의 기본풍속도와 풍속보정 절차에 의한 풍하중 산정 과정을 제시하였다. 이 과정에서 공학적 판단이 요구되는 옥외광고물 설치위치 주변의 지표 조도구분 및 지형계수 평가에 대해 정략적으로 적용할 수 있는 기준을 제시하였다. 또한 비전문가 관점에서 적용하기 용이하도록 가능한 단순화된 정량화 절차를 제시하였다.

• 건축역사연구
• /
• 제20권6호
• /
• pp.77-98
• /
• 2011

The aim of this study is to identify the floor plan types of folk houses or traditional vernacular dwellings found in Nagan Folk Village located in Joellanamdo province. Examining the floor plans appeared among 36 vernacular folk houses presumably built in the 19th century in the village by means of the changes in the number of bays of Anche, the mail block of the house, the study was also able to construct a spatial compositional process of floor plan development. The floor plan examination revealed that the basic floor plan type in Nagan folk housing was '一' shape, a typical southern dwelling based on the existing classification. This basic type is consisted of three bays or rooms: Jeongji (kitchen), Anbang (large room), and Jageunbang (small room). New spaces or rooms are added to this three room house to expand the house as the residential functions become more complex, such as more living and storage spaces. The expansion appears to have two direction. On the one hand, it has been taken place by inserting Marea, an open wooden floor living space between Anbang and Jageunbang to meet the extended living demand. On the other, Jeongjibang, a second kitchen/storage has been attached to Jeongji outward for extra cooking and storage. This two-way expansion shows the trend of symmetric expansion between cooking, storing space and dwelling space. It can be implied that the arrangement of house rooms has been structurally formulated and shared by the farmer-builders in the 19th century in Nagan village who appeared to be influenced by fixed images for housing.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제54권9호
• /
• pp.414-420
• /
• 2005

A method for partial discharge diagnosis based on UHF narrow band type for GIS has been developed and calibrated. In generally, PD cannot be directly measured under on-line condition, but we can indirectly measure the electromagnetic wave made by PD using the high-frequency antenna. Compared with VHF band, electromagnetic waves of UHF band have a low influence for external noise in high-voltage substation. Therefore, we can detect the real abnormality with several pC in GIS using UHF narrow-band type method. For the case of no internal VHF sensor for GIS of the domestic substation, it has applied to use the external UHF sensor attached in spacer in GIS of existing substation. In this paper, we firstly described the technique of partial discharge measurement using frequency analysis and phase analysis in UHF band. Secondly, we presented the results of sensitivity test, the relationship of dBm-pC and diagnosis result of the cause of PD source by phase analysis. And then, we report the diagnosis result of partial discharge on the real GIS in domestic substation. These results make above method applicable for measurement of quantity and cause of PD for real operation GIS in high-voltage substation.

• 수산해양기술연구
• /
• 제35권4호
• /
• pp.343-352
• /
• 1999

Because stow net being used in now is doing throwing net and hauling net through a ship's side, the work is very complicated and the fishing boat needs many seamen and it could cause a loss of lives and ship in stormy weather. We are now using small mesh size 36~500mm and it even catches young fish, so we call it the fishing gear of resource reduction type.Therefore we must make manpower reduction in automatic operation, safe operation of throwing net and hauling net in the stern and the stern-typed stow net of resource management using large mesh. And we performed three-typed model tests to examine the fishing gear. The obtained results are as follows;1. The fishing gear being used in the ship's side type stow net has inappropriate standard and arrangement of the net, resistance increase of the fishing gear and frequent breakdown of the net.2. To supplement the fault of A-typed stow net, we schemed fishing gear developed as both B-type(12-seamed net) and C-types(8-seamed net) of the stern-typed stow net. 3. In model tests, C-typed model net(mesh size 40~1,600mm) was proved good fishing gear because the resistance in accordance with the flowing speed was comparatively small and it's mouth area was broad. 4. A-typed stow net had the spreading device attached to side panel of the net, but the stern-typed stow net had the spreading device consisted of 4 lines far behind about 6m from side panel of the net mouth. In the flowing speed 2knot, the spreading condition of fishing gear was proved batter than the former.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제36권6호
• /
• pp.273-279
• /
• 2014

Purpose: This study assessed the association between eye symptoms (enophthalmos or diplopia) and site of damage, volume, deviated inferior rectus muscle (IRM) and type of fracture with computed tomography (CT). The intent is to anticipate the prognosis of orbital trauma at initial diagnosis. Methods: Forty-five patients were diagnosed with fractures of the inferior wall of one orbit. Fracture area, volume of displaced tissue, deviated IRM, and type of fracture were evaluated from coronal CT by one investigator. The association of those variables with the occurrence of eye symptoms (diplopia and enophthalmos) was assessed. Results: Of 45 patients, 27 were symptom-free (Group A) and 18 had symptoms (Group B) of enophthalmos and/or diplopia. In Group B, 12 had diplopia, one was enophthalmos, and five had both. By CT measurement, group A mean area was $192.6mm^2$ and the mean volume was $673.2mm^3$. Group B area was $316.2mm^2$ and volume was $1,710.6mm^3$. The volume was more influential on symptom occurrence. Each patient was categorized into four grades depending on the location of IRM. Symptom occurrence and higher grade were associated. Twenty-six patients had trap-door fracture (one side, attached to the fracture), and 19 had punched-out fracture (both sides detached). The punched-out fracture was more strongly associated with symptoms and had statistically significantly higher area and volume. Conclusion: In orbital trauma, measurement of fracture area and volume, evaluation of the deviated IRM and classification of the fracture type by coronal CT can effectively predict prognosis and surgical indication.

• 한국농촌건축학회논문집
• /
• 제15권4호
• /
• pp.35-42
• /
• 2013

The study aims to investigate general characteristics of Jae-sil from an architectural perspective by grasping location, deployment, structure, and plan composition based on existing inhabited conditions in Jeollabukdo. Results derived from the study are as follows. First, the location of Jae-sil is classified into mountainous and village types, and the two types showed a similar distribution. The village type showed the most distribution in the foot of a mountain in the rear of village, while the mountainous type is close to graveyard. The Jae-sil were mostly exposed to south, southeast, and southeast, which was not significantly different from residence. For deployment of the Jae-sil, a "二" shaped house, where main quarter and gated building are parallel located, can be common, indicating that additional attached building is less required. Second, for the platform out of structural components, coursed masonry was conducted by using natural rocks, and placed were a prop on the platform, first line on processed foot stone, and others on natural foot stone. For pillar, front line round columns, while others square columns. The binding type of the upper part of pillar is dominated by jangyeosujang and sorosujang. For wooden frame structure, 5ryangs were the most distributed, and out of these, 1goju 5ryang was the most generally used. For a roof part, it was composed with gambrel roof with single eave, and the roof was constructed by placing traditional Korean tile roof on the top. Third, for a size of Jae-sil out of plan composition, although the facade and the side of it were presented in a diverse manner, 4 facade rooms and 1.5 side rooms were the most frequently presented, and all Jae-sil were equipped with front ceremonial space. For spatial composition of Jae-sil, main floored hall is placed at the center, and each room is placed on the left and right side to secure space for ancestral rite for participants of it, and for a house with 5 rooms or more, it shows that main floored hall and rooms are weighted from side to side.

• 한국의류산업학회지
• /
• 제20권2호
• /
• pp.128-142
• /
• 2018

This study explores newborn clothing with regard to clothing type, construction, textiles, design, size, and label placement. Related consumer complaints are also analyzed. Analysis of 50 newborn clothing items revealed six types of newborn clothing: baenaet jeogori, baenaet gown, bodysuit, one-piece, shirt and pants set, and pants. The baenaet jeogori was the most common type, and the most commonly used fasteners were ties and snaps. The following characteristics were commonly observed: front opening, long raglan sleeves, mitten cuffs, cotton fabric, white/ivory color, animal print, contrast hem, $appliqu{\acute{e}}$, and size 60. In-depth interviews of 12 mothers with children under 24 months revealed that the baenaet jeogori was the most unsatisfactory type; the shirt and pants set and bodysuit were preferred. Interviewees were dissatisfied with types of openings, expressing a preference for snaps and complaining about ties, too many snaps, metal snaps, and shoulder openings. Overly wide or narrow sleeves resulted in improper fit, and long sleeves made it difficult to dress the baby. Interviewees required diverse sleeve length options. They were dissatisfied with heavy fabric for hot and warm seasons, and with labels attached inside clothing or outside near the neckline. Mothers with particularly small or big babies complained about limited sizes. To improve current newborn clothing, additional items such as shirt and pants sets or individual pants, front opening clothing with few snaps, proper sleeve fit with diverse length options, lightweight fabric for hot and warm seasons, label placement that avoids skin irritation, and size segmentation are recommended.