• 제목/요약/키워드: attached-type

검색결과 1,068건 처리시간 0.023초

다관절 로보트 손의 설계 (Design on the articulated robotic hand)

  • 백상은;진상태;성흥석;이쾌희
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
    • /
    • pp.276-280
    • /
    • 1993
  • An articulated, multifinger mechanical hand can carry out grasping and manipulation operations on objects of different type and shape. In this paper the architecture of the mechanical hand is presented. Joints are driven by two antagonist tendons. Strain gauges are used to derive tendon tensions, and located in the palm of the hand. Angular defection of the joints is measured by Hall effect sensors attached to the joints. A multiprocessor-based architecture for controlling the hand is illustrated.

  • PDF

개선된 Clamp Circuit 적용 ZVZCS FB DC/DC 컨버터 (An Improved ZVZCS PWM FB DC/DC Converter Using the Modified Clamp Circuit)

  • 김은수;조기연;김윤호;이진수
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 1999년도 전력전자학술대회 논문집
    • /
    • pp.643-645
    • /
    • 1999
  • The conventional high frequency phase-shifted full bridge dc/dc converter has a disadvantage that a circulating current flows through transformer and switching devices during the freewheeling interval. Due to this circulating current, RMS current stress, conduction losses of transformer and switching devices are increased. To alleviate this problem, this paper provides a circulating current free type high frequency soft switching phase-shifted full bridge (FB) dc/dc converter with the modified energy recovery snubber (ERS) attached at the secondary side of transforemr.

  • PDF

충격식 감쇠기의 감쇠특성에 관한 연구 (Damping Characteristics of Impact Damper)

  • 김원철;전순기;양보석;문덕호
    • 소음진동
    • /
    • 제3권1호
    • /
    • pp.29-37
    • /
    • 1993
  • This study is concerned about the impact type damper for effectively restraining the high vibration amplitude in the resonance regions. The theoretical analysis is based on the assumption that the impacts occur twice per cycle at an equal time interval. Simple but reasonable approximations have been derived for the optimum collision clearance and maximum amplitude ratio. Using the impact dampers which is rigidly attached to the primary vibration system, we have experimented for mass ratios and restitution coefficients. The experimental results are in good agreement with theoretical results.

  • PDF

힘 센서를 이용한 4각 보행로보트의 비평탄로 보행에 관한 연구 (Force Sensor Based Locomotion of a Quadruped Walking Vehicle over Uneven Terrain)

  • 이승하;변증남;서일홍;이지홍
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1990년도 하계학술대회 논문집
    • /
    • pp.467-470
    • /
    • 1990
  • This thesis presents a simple heuristic algorithm which can be applied. to a quadruped wafting vehicle for increasing the terrain adaptability. The proposed method controls a leg length which is in tranfer phase to maintain initial orientation of the robot body by using FSR type force sensors attached to foot-tips. Also, some basic experiments using the vehicle are performed to demonstrate the effectiveness of the algorithm.

  • PDF

가변 동흡진기 구축을 위한 예비 실험 (Preparatory Experiment on the Construct ion of Tunable Dynamic Absorber)

  • 박종훈;한상보
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2002년도 춘계학술대회논문집
    • /
    • pp.329-334
    • /
    • 2002
  • Preliminary test for the design and construction of a tuned dynamic absorber is a conducted. Proposed tuned dynamic absorber is a cantilevered beam type, and is supposed to adjust its natural frequency according to the changing operation condition of the primary system. The modal mass of the dynamic absorber is the easiest to control, therefore, the position of the attached mass of the dynamic absorber is considered as the main design parameter of the absorber. The effect of the dynamic absorber is experimentally verified under various operation conditions of the primary system.

  • PDF

헬리콥터 복합재료 힌지없는 허브 부품 및 패들형 블레이드 설계/해석

  • 김덕관;홍단비;이명규;주진
    • 항공우주기술
    • /
    • 제2권2호
    • /
    • pp.33-44
    • /
    • 2003
  • 본 논문은 힌지없는 로터 시스템의 설계 핵심기술인 복합재료 플렉셔 설계 및 패틀형 복합재료 블레이드 설계/해석 기법을 소개하였다. 기존 금속재 혹은 엔지니어링 플라스틱 플렉셔 부품을 복합재료를 사용하여 설계한 후 NASTRAN과 FLIGHTLAB을 이용하여 구조 해석 및 동역학 특성 해석을 수행하였다. 패들형 블레이드를 복합재료 힌지없는 플렉셔 장착 허브에 연결한 힌지없는 로터 시스템에 대한 동적 특성을 살펴보았다. 또한 패들형 블레이드를 기존 실물크기 블레이드 구조 자료를 이용하여 프루드 축소화하였으며 축소값을 이용하여 블레이드를 설계하였다. 이 과정을 통해 형상이 복잡한 패들형 복합재료 블레이드에 대한 형상 설계 및 단면구조 설계 기법을 익혔다. 본 논문은 현재 수행중인 “차세대 헬리콥터 로우터 시스템 개발” 사업 등에 직접 적용될 수 있을 것으로 기대된다.

  • PDF

소규모 유치원.초등학교 건축의 개념 규정 연구 - 대도시 고밀도지역을 중심으로 - (A Study on the Definition of Minimum-sized Kindergarten and Elementary School)

  • 윤천근
    • 교육시설
    • /
    • 제5권2호
    • /
    • pp.57-66
    • /
    • 1998
  • The present, there are no evident standards about facilities of minimum-sized kindergarten and lower grades elementary school. So, there are many serious obstacles that related laws and regulations, planning for facilities and scales in this country. Accordingly, this study proposed the concept, type, and size of minimum-sized kindergarten and lower grades elementary school, in case big cities of high density. 1. The concept of minimum-sized kindergarten and lower grades elementary school is defined to the large scale school and class, that integration of children of kindergarten into lower grades elementary school. 2. The type of minimum-sized kindergarten and lower grades elementary school is classified into branch school type and detached school type. The former is located in the main elementary school, The latter is separated from the main elementary school. And each type is classified into singleness case and attached case. 3. The number of students per minimum-sized kindergarten and lower grades elementary school is hold from two hundred children to three hundred children in 12 classes, but suitability is from one hundred to two hundred children. And class sizes proposed $20{\sim}25$ children in minimum-sized kindergarten and $25{\sim}30$ children in lower grades elementary school.

  • PDF

뇌졸중 환자의 정서반응 유형에 관한 연구 (A Subjectivity Study on Type of Emotional Response of Stroke Patient)

  • 안수연
    • 대한간호학회지
    • /
    • 제30권3호
    • /
    • pp.584-594
    • /
    • 2000
  • The purpose of this study was to identify emotional responses, of stroke patients using Q analysis. From the data analysis, five types of emotional responses in stroke patients were classified as follows. 1. Acceptance and Overcoming : They attached to life strongly and had self-confidence of recovery. They were striving against their situation through using anything else good for their recovery. 2. Anger Type : They recognized a labile feeling and were angered easily. They had a self-confident and self-esteemed personality before they had a stroke. 3. Conflict Type : They wanted interaction with others. This individual recognized that no one knows their agonies. They were thankful to god or their family, while they could not control their minds. Their family supports were low. 4. Deficiency of self-esteem Type : They had a self-confidence of recovery, but they were in fear of interaction with others. Especially, they were ashamed of themselves. They have a high sense of responsibility and nigh self-esteem for themselves before they had a stroke. 5. Despair Type. : They were sorry to trouble their family. They felt depression, anxiety, darkness, uselessness of themselves, and they wanted to die. They recognized financial burden. for their family. The characteristics of the five types of stroke patient identified in this study will be used to assess emotional nursing needs for stroke patients. The findings of this study will provide practical guidelines for developing nursing interventions for stroke patients based on the characteristics of subjectivity types.

  • PDF

초등학생의 부모·교사·또래 애착 유형별 자아개념 및 학교생활적응 (Elementary School Children's Self-Concept and School Life Adjustment according to Attachment Types of Parents, Teachers and Peers)

  • 김분;최연실
    • 대한가정학회지
    • /
    • 제50권1호
    • /
    • pp.1-13
    • /
    • 2012
  • The purpose of this research is to explore the self-concept and school life adjustment based on group classification of attachment types with parents, teachers and peer groups among 6th grade students at elementary schools. The findings suggest that attachment is highest with one's mothers, followed by peer groups, fathers and teachers. This is in accordance with the overall tendencies of children to be attached to their parents, teachers, peer groups, according to their self-concept and school life adjustment. In addition, the tendency of attachment with parents, teachers, and peer groups according to gender is not meaningful except for peer-group affection between boys and girls. Furthermore, an integrated attachment type is ranked highest, followed by parents attachment type, peer attachment type, and unstable attachment type, in order based on cluster analysis. Finally, each attachment group among students showed meaningful differences in socio-demographic variables, self-concept, and school life adjustment.

자갈궤도용 침목방진패드의 수직 스프링강성 시험기법에 관한 실험적 연구 (An Experimental Study on the Spring Stiffness Test Method of under Sleeper Pad for Ballasted Track)

  • 최정열;신태형
    • 한국안전학회지
    • /
    • 제31권3호
    • /
    • pp.82-88
    • /
    • 2016
  • Ballasted gravel will be damaged or worn by the repetitive train load. And these damages of ballast gravel could be increased by increasing vehicle speed. Therefore, various techniques for reducing the ballast pressure have been proposed, such as the attached pad type of sleeper bottom for ballasted track. In this study, spring stiffness test method were proposed to evaluate the performance of under sleeper pad for ballasted track. Standard ballast plate(SBP) was developed to simulate the ballast gravel and compared with the foreign test results. Experimental results showed a trend similar to the previous studies according to various loading plate type. specimen type(Type A, Type B) differences in spring stiffness according to hardness were not significant. Also, the FSP (Flat steel plate) - shaped jig is about 80% of the spring stiffness was greater than SBP. Therefore, to evaluate the actual spring stiffness of under sleeper pad for ballasted track, it was important to adopted the appropriate spring stiffness test method using the SBP to simulate actual field conditions.