• Journal of Environmental Health Sciences
• /
• v.27 no.1
• /
• pp.100-105
• /
• 2001

Microstructural examinations were performed on the anaerobic biofilm from reactor filled with PE support media. Optical microscope, SEM and fluorescent microscope were used for qualitative and morphological studies on the attached microorganism under anaerobic condition. Microorganisms were attached in crevices where protection from shear forces of surfaces where easy to contact with support media surface. A hypothesis for biofilm accumulation occurs on a surface such as polymer support media is presented schematically : 1st step ; cell-support media attachment, 2nd step ; cell-support media attachment and cell-cell attachment, 3rd step ; attached biofilm from neighboring crevices joins together and growing, 4th step ; mature and irregualar biofilm was formed. In SEM photographs, shape and structures of biofilm were observed, but microorganism species and methanogens were not identified. A large number of methanogenic bacteria were identified on the surface of PE substratum by fluorescence under 480nm of radiation and it was estimated that methanogenic bacteria was related to initial attachment of bacteria under anaerobic condition.

• Journal of Environmental Science International
• /
• v.22 no.1
• /
• pp.1-6
• /
• 2013

A fixed biofilm reactor system composed of anaerobic, anoxic(1), anoxic(2), aerobic(1) and aerobic(2) reactor was packed with synthetic activated ceramic (SAC) media and adopted to reduce the inhibition effect of low temperature on nitrification activities. The changes of nitrification activity at different wastewater temperature were investigated through the evaluation of temperature coefficient, volatile attached solid (VAS), specific nitrification rate and alkalinity consumption. Operating temperature was varied from 20 to $5^{\circ}C$. In this biofilm system, the specific nitrification rates of $15^{\circ}C$, $10^{\circ}C$ and $5^{\circ}C$ were 0.972, 0.859 and 0.613 when the specific nitrification rate of $20^{\circ}C$ was assumed to 1.00. Moreover the nitrification activity was also observed at $5^{\circ}C$ which is lower temperature than the critical temperature condition for the microorganism of activated sludge system. The specific amount of volatile attached solid (VAS) on media was maintained the range of 13.6-12.5 mg VAS/g media at $20{\sim}10^{\circ}C$. As the temperature was downed to $5^{\circ}C$, VAS was rapidly decreased to 10.9 mg VAS/g media and effluent suspended solids was increased from 3.2 mg/L to 12.0 mg/L due to the detachment of microorganism from SAC media. And alkalinity consumption was lower than theoretical value with 5.23 mg as $CaCO_3$/mg ${NH_4}^+$-N removal at $20^{\circ}C$. Temperature coefficient (${\Theta}$) of nitrification rate ($20^{\circ}C{\sim}5^{\circ}C$) was 1.033. Therefore, this fixed film nitrogen removal process showed superior stability for low temperature condition than conventional suspended growth process.

• Journal of environmental and Sanitary engineering
• /
• v.13 no.2
• /
• pp.156-164
• /
• 1998

This study was performed to select media for the development of biological activated carbon process. Using activated carbon made by Norit, Calgon, Samchully Co., removal efficiency of humic acid by the isothermal adsorption test and biodegradation of organic matters by microbes attached to BAC and observation and counting of microbes attached to BAC were examined. The removal efficiency of humic acid with dose of activated carbon was influenced by initial concentration. Compared with other activated carbon, Norit was found to be most effective in view of adsorption capacity, biodegradation of organic matter, and attachment characteristics of microorganism. In conclusion, Norit which has high adsorption capacity and good biodegradation of organic matter was recommended for selecting media in BAC process.

• Journal of Broadcast Engineering
• /
• v.17 no.1
• /
• pp.37-48
• /
• 2012

These days many DLNA home media network services start in home network area. DLNA networking softwares included in DLNA media devices contains all of server, renderer and controller functions. But a home media device in home media network environment not uses all of DLNA functions but uses only limited functions. Using all of integrated DLNA functions wastes networking and processing resources especially in home media network, because a home media device uses very limited functions. For example, a smart-TV has a main role of playback and a network attached storage has a main role of media content storage. In this paper, we analyze integrated DLNA networking softwares and design DLNA software models representing each home media device so as to utilize device resources efficiently. And we implement DLNA softwares for smart-TV and smart-phone and test resource efficiency.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.6 no.2
• /
• pp.78-88
• /
• 2003

This study was conducted to develop the plant-mat for ecological restoration which was formed as the thin multi-layers of woven nets, soil media, seeds, etc. The experimental site was selected at a slope of 240$m^2$ at the rear of Design College of Sangmyung University and divided into 8 sub-experimental plots (20$m^2$ each) according to mat types. (forest-type and grass-type mats with and without seed attachment, respectively) Also, the existing vegetation plot and the no-treatment plot were included in this experiment for comparison. The experiment construction was conducted on September 3, 2002. Mat covered plots regardless of seed attachment showed nearly no signs of erosion even if rainy season in summer compared to the no-treatment plot. Vegetation monitoring result showed that germination rates were somewhat high in both forest and grass-type mats without seed attachment in the initial germination stage. Although germination rates of seed attached mats were somewhat slower than non-seed attached mats in the germination stage, but over time, it showed a good rooting and shooting environment for germinated tree and grass species because of soil media existence within the mat. This indicates that while non seed-attached mats require follow-up maintenance, seed-attached mats does not require maintenance after rooting and germination.

• Journal of the Korean Professional Engineers Association
• /
• v.30 no.4
• /
• pp.18-29
• /
• 1997

The telecommunications industry pro-grossed as old media, but new media is going into a new era of multi-media in the 21st century. In the latter half of 1970s we saw a boom of new media as a post-telephone era began. As the machines grew to the world level(standard), facsimiles, minitels of France and word processors of Japan were developed. Today some 15 years since the advent of new media era, the progress of technology is astonishing. Advancement of technology is seen in V and U letters attached to semiconductor chips, astonishing capability advancement of light emitting lasers and photo-diodes, etc and additionally technology advancement in large capacitized light disks. Thus these technologies have made possible transmitting a broad band network and a mobile communication and digitalized broadcasting. Increased capacity of every terminal, e.g, "letters $.$ voice $.$ still and mov-ing pictures" are essential for new media simultaneous and two -way transmission.

• Journal of Intelligence and Information Systems
• /
• v.14 no.3
• /
• pp.41-57
• /
• 2008

U-Publication, the Tag-Embedded publication, is one of U-Media. U-Media is defined as a media where human creates and consumes content through not only human cognitive and perceptual processes but also through the interactions between surrounding digital systems. U-Media provides information by generating, collecting, and attaching the content itself and the related information based on the interaction of the bio-systems incorporating digital information and devices embedded in humans, and surrounding objects including external digital devices. Using U-Publication, readers consume its content not only in offline but also online through a mobile RFID reader which touches and connects the URLs embedded in the RFID tags attached to it. Readers can consume the additional content though the hyperlinks attached to U-Publication and perform commercial activity as well as consumer the printed content. This paper defines the RFID-Tagged publication, proposes its related business models, and evaluates the alternative business models through a simulation study.

• Journal of Environmental Health Sciences
• /
• v.26 no.3
• /
• pp.76-80
• /
• 2000

The purpose of this study is to compare the performance of rubble support media coated perlite and non-coated media. As rubble was coated perlite, the porocity of reactor was increased 5.6%, whereas packing weight was decreased 17.6%. When rubble was coated perlite, microorganisms were attached on the surface of support media after 2 hours. TCOD removal efficiency of the reactor packed with rubble support media coated perlite was higher 4~9% than that of rubble. The end of experiment, MLVSS of rubble support media and rubble coated perlite was 1858.8mg/ι, 2785.9mg/ι, respectively.

• Journal of Environmental Science International
• /
• v.7 no.3
• /
• pp.269-274
• /
• 1998

In order to develop of support medla for bloom reactor, physicochemical properties and attachability of surface of activated carbon, clay mineral, non-clay mineral, and waste mold sand were enamined. Measured physicochemical properties of materials were surface roughness, mean particle size, surface area, hydrophobicity, and surface charge. At a tested materials, activated carbon was the best attachable material and microorganisms were attached $20.1{\times}10^7CFU/cm^2$ at surface, compared with diatomaceous earth which were attached of $9.2{\times}10^7CFU/cm^2$ in our research, surface area and hydrophobicity show- ed more Influence than any other factor on attachment of microorganisms.

• Journal of Industrial Technology
• /
• v.25 no.A
• /
• pp.133-139
• /
• 2005

In this study, as MBBR(Moving Bed Biofilm Reactor) process using waste tire media is suggested for retrofitting with advanced wastewater treatment and the removal property of organic matter and nutrient and the capacity of media are evaluated through long-term operation with pilot plant following seasons, the application capacity of retrofitting with MBBR process to a existing wastewater treatment is studied. As a result of the long-term operation of the process, it is proved that there is no loss and abrasion of media, and also that it is possible to secure the sufficient attached bio-mass. The values of organic matter and nutrient in effluent are suitable for the strict discharged water quality standards in every season including winter.