• 대한기계학회논문집
• /
• 제19권6호
• /
• pp.1529-1538
• /
• 1995

In this study, a liquid sheet type co-axial nozzle has been used to investigate the turbulent atomization characteristics which could result in the experimental data to be used in designing a jet nozzle with high performance. Image processing technique and immersion sampling method were employed to measure droplet size. In atomizing characteristics, droplet size distributions and absolute droplet sizes, SMD(Sauter Mean Diameter) have been investigated in the wide ranges of flow field depending upon the air-water mass ratios. And the comparisons between the present data and the semi-empirical curves have been conducted semi-empirical correlation for SMD has been derived in the present analysis.

• 한국연소학회지
• /
• 제1권1호
• /
• pp.57-64
• /
• 1996

The atomizing characteristics in a spray injected from a twin fluid atomization nozzle have been investigated. The Sauter mean diameters as mean diameter are compared with wavelength calculated from the instability theory. The Sauter mean diameter are measured by the Fraunhofer diffraction theory using the Malvern particle sizer. The wavelength is calculated using the mean relative velocity instead of the exit relative velocity of nozzle. Also shadowgraphy technique is used to visualize atomization phenomena. This paper gives a possibility that the mean diameter can be predicted with the wavelength obtained by the simple instability theory.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2000년도 제20회 KOSCO SYMPOSIUM 논문집
• /
• pp.26-34
• /
• 2000

Geometry change of burner nozzle has influence on fuel atomizing and combustion characteristics. NOx reduction technologies can be divided into two method; Before combustion method(NOx treatment of fuel) and After combustion method(NOx treatment of flue gas). In this study, experiments are carried out using difference nozzle and combustion condition change to reduce NOx in heavy oil fired thermal utility boiler. These methods have advantage like easy application and low installation cost. By this method NOx can be reduced by 18% and maintain CO emission level.

• 한국분무공학회지
• /
• 제6권1호
• /
• pp.9-17
• /
• 2001

The effect of air entrainment in twin-fluid spray structure is investigated experimentally by varing the amount of itemizing air. The air entrainment is expected to affect on droplet size and velocity, droplet number density, turbulent kinetic energy and vorticity. PDA(Phase Doppler Anemometer) and PIV(Particle Image Velocimetry) system are used to measure those important factors in analyzing spray structure. The results show that spray structure consists of three distinctive regions ; the atomizing region near nozzle, characterizing strong convective effect, the central core region where droplets are accelerated, and the spray sheath region where droplets are decelerated due to air entrainment. The local air entrainment rate is largest near nozzle, characterizing strong turbulent kinetic energy and vorticity but deceases along axial distance.

• 대한기계학회논문집B
• /
• 제20권2호
• /
• pp.697-709
• /
• 1996

Supersonic axisymmetric jets issuing from various kinds of nozzles with a throat diameter of a few millimeters were experimentally investigated. The exit Mach number and Reynolds number based on the throat diameter of nozzle were in the range of 1.0 ~ 5.9 and 8.4$\times$ $10^4$ ~ 2.9$\times$$10^6$, respectively. The nozzle pressure ratio was varied from 5 to 85. Present paper aims to offer fundamental information of the supersonic free-jets, with an emphasis to give data with which the shape of the free-jets can be depicted under a specified condition. Experimental data are summarized to enable an estimation of the shape of the supersonic free-jets. The result shows that the shape of free-jets is dependent on only the nozzle pressure ratio.

• 농업과학연구
• /
• 제14권1호
• /
• pp.81-97
• /
• 1987

병충해방제(病蟲害防除)에 있어서 효율적(效率的)인 분무립자(噴霧粒子)의 크기는 $20{\mu}m$ 이내(以內)이지만 비산(飛散)의 해(害)를 감안하여 $140{\sim}200{\mu}m$를 추천하고 있다. 그러나 우리나라 수도방제기(水稻防除機)의 주종(主種)인 총포노즐의 경우 입자(粒子)크기는 $220{\sim}750{\mu}m$로 과대(過大)한 실정(實情)이다. 우리나라에서 널리 이용(利用)되고 있는 과권(過卷) 노즐의 구조(構造)를 Figure 2와 같이 고안(考案)하여 공기(空氣)를 혼합(混合)시킨 약액(藥液)을 이용(利用)함으로써 과실내(過室內)에서의 예비무화효과(豫備霧化效果), 약액(藥液)의 감소된 표면장력(表面張力) 및 점주(粘住), 분사액(噴射液)의 증가된 주파수(周波數)의 효과(效果)를 이용(利用)하여 분무립자(噴霧粒子)를 개선(改善)하고저 실시(實施)된 실험결과(實驗結果)는 다음과 같다. 분무립자(噴霧粒子) 크기는 분무압력(噴霧壓力)(본(本) 실험(實驗)에서는 $0.70kg/cm^2$부터 $6.33kg/cm^2$까지 실시(實施)) 이 증가(增加)됨에 따라서 점차로 미립화(微粒化)되었고 이 경향(傾向)은 표준(標準)노즐의 결과(結果)와 같다. 동일(同一)한 분무압력하(噴霧壓力下)에서 분무립자(噴霧粒子)의 크기 및 분포상태(分布狀態)를 표준(標準)노즐의 비교(比較)할 때 체적평균직경(體積平均直徑)이 작아졌고 입자(粒子)크기 분포(分布)도 개선(改善)되었다. 입자(粒子)크기 분포(分布)는 분무형(噴霧型)의 중심(中心)으로부터 외측(外側)으로 향(向)하면 체적평균직경(體積平均直徑)이 작아지는 현상(現象)이었다.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.451-452
• /
• 2006

The influence of Hi-flux powders characteristics on the performance of magnetic powder cores was studied. It was found that different cooling rate and nozzle configuration could change the shape and microstructure of powders. Smooth surface and spherical shape of powders were beneficial to improve DC bias performance and reduce core losses of magnetic powder core.

• 농업과학연구
• /
• 제5권1호
• /
• pp.29-34
• /
• 1978

Gun-type nozzle에 있어서 입자(粒子)의 미립화(微粒化)를 개선(改善)코저 절선속도(切線速度)를 증가(增加)하는 방법(方法)의 일환(一環)으로 Screw 중자(中子)를 제작(製作) 장치(裝置)한 Nozzle로 실내(室內)에서 분무실험(噴霧實驗)한 결과(結果) 다음과 같은 결론(結論)을 얻었다. 분무입자(噴霧粒子)의 직경(直徑)이 클수록 분무도달거리(噴霧到達距離)는 컸으며 Screw중자(中子)를 장치(裝置)하였을 때가 장치(裝置)하지 않았을 때에 비(比)하여 분무입자(噴霧粒子)의 미립화(微粒化)는 현저히 양호(良好)하였고 분무도달거리(噴霧到達距離)는 분구(噴口)가 소구경시(小口徑時)에는 거의 차이(差異)가 없었으나 분구(噴口)가 증대(增大)함에 따라서 현저히 짧아졌다. 최고(最高) 도달거리(到達距離) 지점(地點)부터 1~2m의 분무도달거리(噴霧到達距離)에 있어서는 기류부유이동(氣流浮遊移動)의 현상(現象)으로 분무입자(噴霧粒子)가 작아졌다.

• 대한기계학회논문집B
• /
• 제21권1호
• /
• pp.132-139
• /
• 1997

Spray characteristics of external mixing sonic twin-fluid atomization nozzles are investigated experimentally. Particle sizes are measured by the Fraunhofer diffraction method using the Malvern particle analyzer, and their radial distributions are obtained using the tomographical transformation technique. The spatial distribution of SMD shows that the drop size increases in the radial direction at a fixed liquid flow rate, and the distribution is getting uniform rapidly as the atomizing gas pressure increases. The SMD decreases as the liquid flow rate increases at a fixed GLR. It is found that the atomization efficiency of the flush type sonic nozzle is superior to that of protrusion type. The effect of laser beam diameter of the particle analyzer on the spatial SMD distribution is minor at present experimental conditions.

• Journal of Biosystems Engineering
• /
• 제21권2호
• /
• pp.117-122
• /
• 1996

Droplet sizes produced from a mist blower should be adequate to get highly biological effects with a reasonable level of work performance. However the droplet sizes from the conventional nozzles of the mist blower were around VMD 95 to 469$\mu$ which were relatively large as compared with the recommended droplet sizes in liquid flow rate of 17.2 m$/ell$s with air flow rate of 16660$m^3$/s on the maximum travel distance of about 4.0 m. The velocity of air stream at the point where two fluids, air and liquid, impact each other, was tried to maximize as much as possible in order to enhance the atomization performance of a newly designed twin fluid nozzles with the same or better level of performance of the conventional mist blower, The configuration of nozzle orifice should be designed to enlarge the contact area between air and liquid to enhance the atomization.