• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1999년도 춘계학술발표회요약집
• /
• pp.279-279
• /
• 1999

To improve the corrosion model of the fuel performance analysis code COSMOS, a model was developed considering thermohydraulic phenomena and the effect of water chemistry and low Sn in the alloy composition on the corrosion behavior. It is assumed that the lithium enhancement factor influences the corrosion behavior only if the subcooled void is present in the coolant. The developed model was verified with the database obtained from Grohnde and Ringhals 3 reactors. Comparison of predicted oxide thickness with measured data showed the applicability of COSMOS code to analyze the cladding oxidation. In the future, the effect of the hydride in the cladding and the precipitate changes due to irradiation should be included.cluded.

• 한국세라믹학회지
• /
• 제53권6호
• /
• pp.575-580
• /
• 2016

Microstructural design of ceramics has generally focused on information gathered at the micro- and macro-scales and related this to how specific properties could be improved. Ceramic processing serves as the key to optimizes the final microstructure. However, the advent of nano-scale microstructures and highly advanced characterization tools are forcing us to develop new knowledge of what is occurring not just at the micro-scale but also at the atomic level. Thus we are now beginning to be able to address how microstructure is influenced by events at the atomic scale using atomic scale images and data. Theoreticians have joined us in interpreting the mechanisms involved in the "microstructural" evolution at multiple scales and how this can be used to enhance specific properties of ceramics. The focus here is on delving into the various layers the "microstructure" in order understand how atomic-scale events influence the structure and properties of ceramics.

• Nuclear Engineering and Technology
• /
• 제38권7호
• /
• pp.665-674
• /
• 2006

Three-dimensional neutron flux and fluence of Kori Unit 3 were evaluated using the synthesis technique described in Regulatory Guide 1.190 for all reactor geometry. For this purpose DORT neutron transport calculations from Cycle 1 to Cycle 15 were performed using BUGLE-96 cross-section library. The calculated flux and fluence were validated by comparing the calculated reaction rates to the measurement data from the dosimetry sensor set of the $5^{th}$ surveillance capsule withdrawn at the end of cycle 15 of Kori Unit 3. And then the best estimation of the neutron exposures for the reactor vessel beltline region was performed using the least square evaluation. These results can be used in the assessment of the state of embrittlement of Kori Unit 3 pressure vessel.

• 방사선산업학회지
• /
• 제2권3호
• /
• pp.111-119
• /
• 2008

Microarrays can measure the expression of thousands of genes to identify the changes in expression between different biological states. To survey the change of whole Salmonella genes after a relatively high dose of gamma radiation (1 kGy), transcriptome dynamics were examined in the cells by using DNA microarrays. At least 75 genes were induced and 89 genes were reduced two-fold or more after irradiation. Several genes located in pSLT plasmid, cyo operon, and Gifsy prophage were induced along with many genes encoding uncharacterized proteins.While, the expression of genes involved in the virulence of Salmonella as well as metabolic functions were decreased. Although the radiation response as a whole could not be illustrated by using DNA microarrays, the data suggest that the response to high dose of irradiation might be more complex than the SOS response.

• Nuclear Engineering and Technology
• /
• 제34권4호
• /
• pp.269-285
• /
• 2002

Water heat transfer experiments were carried out in a uniformly heated annulus with a wide range of pressure conditions. The local heat transfer coefficients for saturated water (low boiling have been measured just before the occurrence of the critical heat flux (CHF) along the length of the heated section. The trends of the measured heat transfer coefficients were quite different from the conventional understanding for the heat transfer of saturated flow boiling. This discrepancy was explained from the nucleate boiling in the liquid film of annular flow under high heat flux conditions. The well-known correlations were compared with the measured heat transfer coefficients. The Shah and Kandlikar correlations gave better prediction than the Chen correlation. However, the modified Chen correlation proposed in the present work showed the best agreement with the present data among correlations examined .

• Smart Structures and Systems
• /
• 제22권2호
• /
• pp.231-237
• /
• 2018

A significant data problem is encountered with condition monitoring because the sensors need to measure vibration data at a continuous and sometimes high sampling rate. In this study, compressive sensing approaches for condition monitoring are proposed to demonstrate their efficiency in handling a large amount of data and to improve the damage detection capability of the current condition monitoring process. Compressive sensing is a novel sensing/sampling paradigm that takes much fewer data than traditional data sampling methods. This sensing paradigm is applied to condition monitoring with an improved machine learning algorithm in this study. For the experiments, a built-in rotating system was used, and all data were compressively sampled to obtain compressed data. The optimal signal features were then selected without the signal reconstruction process. For damage classification, we used the Variance Considered Machine, utilizing only the compressed data. The experimental results show that the proposed compressive sensing method could effectively improve the data processing speed and the accuracy of condition monitoring of rotating systems.

• Journal of Radiation Protection and Research
• /
• 제32권1호
• /
• pp.1-8
• /
• 2007

도시지역의 방사능 오염으로 거주민의 피폭영향을 평가할 수 있는 모델 METRO-K를 개발하였다. 모델의 특성으로 1) 실험 또는 경험자료를 사용하기 때문에 수학식이 간단하여 이해가 쉬울 뿐 아니라 계산에 필요한 변수의 수가 적으며 2) 도시환경을 구성하는 5가지 기본표면 만을 사용하여 복잡하고 다양한 주변 환경을 쉽게 구성할 수 있으며 3) 각기 다른 오염 표면으로 인한 선량을 평가함으로써 표면마다 적합한 제염대책을 수립하는데 용이하다. 피폭자의 특정 위치에서 각기 다른 오염표면으로부터 받게 되는 선량은 감마에너지와 오염 표면별 공기커마 값을 데이터 라이브러리로 만들어 평가에 이용하였다. 유럽 도시지 역의 4가지 대표적 거주형태 에 대한 공기커마 값을 사용하여 우리나라 도시지역의 7가지 대표적 주거형태에 적합하도록 공기커마 값을 조합하여 적용하였다. 장기간 방사성물질의 누설을 고려하여 하루 단위의 핵종별 공기중 농도, 강우량, 핵종의 화학적 형태 구성분율이 입력되면 침적 후 시간에 따른 각기 다른 표면에서의 공기중 흡수선량률과 피폭자의 거주 위치에 따른 인체 선량률이 평가된다. 아파트 밀집지역에 대한 가상 오염 시나리오의 적용결과 피폭자의 거주위치 뿐 아니라 피폭자가 거주하는 주변 환경에 따라 인체 선량률은 확연한 차이를 나타냈다.

• Nuclear Engineering and Technology
• /
• 제43권4호
• /
• pp.317-328
• /
• 2011

Pyroprocessing technology was developed in the beginning for metal fuel treatment in the US in the 1960s. The conventional aqueous process, such as PUREX, is not appropriate for treating metal fuel. Pyroprocessing technology has advantages over the aqueous process: less proliferation risk, treatment of spent fuel with relatively high heat and radioactivity, compact equipment, etc. The addition of an oxide reduction process to the pyroprocessing metal fuel treatment enables handling of oxide spent fuel, which draws a potential option for the management of spent fuel from the PWR. In this context, KAERI has been developing pyroprocessing technology to handle the oxide spent fuel since the 1990s. This paper describes the current status of pyroprocessing technology development at KAERI from the head-end process to the waste treatment. A unit process with various scales has been tested to produce the design data associated with the scale up. A performance test of unit processes integration will be conducted at the PRIDE facility, which will be constructed by early 2012. The PRIDE facility incorporates the unit processes all together in a cell with an Ar environment. The purpose of PRIDE is to test the processes for unit process performance, operability by remote equipment, the integrity of the unit processes, process monitoring, Ar environment system operation, and safeguards related activities. The test of PRIDE will be promising for further pyroprocessing technology development.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2023년도 임시총회 및 춘계학술대회
• /
• pp.63-63
• /
• 2023

Sugar beet (Beta vulgaris L.) is one of the most important sugar crops and provides up to 30% of the world's sugar production. In this study, we mainly performed RNA-sequencing to obtain identify putative genes involved in biosynthesis pathway of sucrose in sugar beet and comparative transcriptomic analyses in the four developmental stages (50, 90, 160 and 330 days after seedling). As a result of the sugar content analysis, it was increased significantly from 50 to 160 days after seedling (DAS), and then decreased at 330 DAS. On the other hand, the taproot weight, length, and width were increased during all the growth periods. Out of 21,451 genes with expressed value, 21,402 (99.77%) genes had functional descriptions. Among the three comparisons, S1 (50 DAS) vs. S2 (90 DAS), S1 vs. S3 (160 DAS), and S1 vs. S4 (330 DAS), expression profiling of the transcripts was identified 4,991 with differentially expressed genes (DEGs). By comparing the top 20 enriched gene ontology (GO) terms as three comparisons, the top GO terms were commonly confirmed with external encapsulating structure, cell wall, and extracellular regions. In addition, the 38 enriched candidate genes related to sucrose biosynthetic pathway were screened from the entire DEG pool, and the candidate genes might be providing a basic data for further sugar metabolism studies in development of sugar beet taproot.

• Journal of Radiation Protection and Research
• /
• 제14권2호
• /
• pp.30-36
• /
• 1989

고리 1호기의 사용후 핵연료에 함유된 핵종중 핵임계도에 미치는 영향이 큰 22개 핵종에 대한 핵단면적 자료를 XLACS-II에 의해서 ENDF/B-IV로 부터 취해서 FISSLIB(51군 핵단면적 자료)를 만들었다. 그리고 AMPX 조직에 의해서 DLC-43/CSRL 자료로 부터 생산된 51군 핵단면적 자료와 함께 사용할 수 있도록 하였다. 한편 BNL-325와 FISSLIB을 비교하여 후자의 유용성을 확인하였다. 그리고 FISSLIB에 수록된 핵분열 생성물 핵종에 대한 핵군단면적을 기본 입력자료로 하여 무한 배열된 고리 1호기 사용후 핵연료봉에 대한 핵임계도 계산을 수행하였다. 그 결과 냉각기간에 따라 핵분열 생성물 핵종을 고려할 때의 핵임계도는 그것을 무시할 때보다 9-14%의 감소효과를 나타냈다.