• Steel and Composite Structures
• /
• 제34권1호
• /
• pp.53-73
• /
• 2020

A novel all-steel miniature bar-type structural fuse (MBSF) with cold formed bolted connections is developed in this study, which consists of a central energy dissipation core cut from a smooth round bar, an external confining tube and nuts. Three types of cross sections for the central energy dissipation core, i.e., triple-cut, double-cut and single-cut cross sections, were studied. Totally 18 specimens were axially tested under either symmetric or asymmetric cyclic loading histories, where the parameters such as cut cross sectional area ratio, length of the yielding portion and cross sectional type were investigated. Numerical simulation of 2 representative specimens were also conducted. An analytical model to evaluate the bending failure at the elastic portion was proposed, and a design method to avoid this failure mode was also presented. The experimental results show that the proposed MBSFs exhibit satisfactory hysteretic performance under both the two cyclic loading histories. Average strain values of 8% and 4% are found to be respectively suitable for designing the new MBSFs as the ultimate strain under the symmetric and asymmetric cyclic loadings.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.226-240
• /
• 2020

This paper presents an experimental investigation of asymmetric impact effects on hydroelastic responses. A 1:64 scaled segmented ship model with U-shape open cross-section backbone was newly designed to meet elastic similarity conditions of vertical, horizontal and torsional stiffness simultaneously. Different wave heading angles and wavelengths were adopted in regular wave test. In head wave condition, parametric rolling phenomena happened along with asymmetric slamming forces, the relationship between them was disclosed at first time. The impact forces on starboard and port sides showed alternating asymmetric periodic changes. In oblique wave condition, nonlinear springing and whipping responses were found. Since slamming phenomena occurred, high-frequency bending moments became an important part in total bending moments and whipping responses were found in small wavelength. The wavelength and head angle are varied to elucidate the relationship of springing/whipping loads and asymmetric impact. The distributions of peaks of horizontal and torsional loads show highly asymmetric property.

• Journal of Mechanical Science and Technology
• /
• 제14권12호
• /
• pp.1386-1395
• /
• 2000

The mear field structure of round turbulent jets with initially asymmetric velocity distributions is investigated experimentally. Experiments are carried out using a constant temperature hot-wire anemometry system to measure streamwise velocity in the jets. The measurements are undertaken across the jet at various streamwise stations in a range starting from the jet exit plane and up to a downstream location of twelve diameters. The experimental results include the distributions of mean and instantaneous velocities, vorticity field, turbulence intensity, and the Reynolds shear stresses. The asymmetry of the jet exit plane was obtained by using circular cross-section pipes with a bend upstream of the exit. There pipes used here include a straight pipe, and 90 and 160 degree-bend pipes. Therefore, at the upstream of the upstream of the pipe exit, secondary flow through the bend mean streamwise velocity distribution could be controlled by changing the curvature of pipes. The jets into the atmosphere have two levels of initial velocity skewness in addition to an axisymmetric jet from a straight pipe. In case of the curved pipe, a six diameter-long straight pipe section follows the bend upstream of the exit. The Reynolds number based on the exit bulk velocity is 13,400. The results indicate that the near field structure is considerably modified by the skewness of an initial mean velocity distribution. As the skewness increases, the decay rate of mean velocity at the centerline also increases.

• 한국화재소방학회논문지
• /
• 제24권1호
• /
• pp.40-45
• /
• 2010

비대칭 H형강을 활용한 합성보는 1970년대 후반 이후 스웨덴에서 Thor beam(Hat beam)으로 발표되었으며 British Steel과 SCI는 슬림플로어 보를 개발하였다. 슬림플로어 공법은 1990년대 초반부터 유럽의 주요 선진국에서 많은 관심을 갖고 개발하여 온 건축 구조 부재의 한 형태로 2000년대에 영국에서는 열간압연 형강 그리고 핀란드에서는 비대칭 용접 형강의 관심이 집중되고 있다. 슬림플로어 공법의 가장 큰 장점은 층고 감소를 토대로 도심 건축물의 최대 10% 내외의 연면적 증가 효과와 각종 내 외장재 절감 및 자원의 절약 폐기물 감소효과 등이며 일반 합성보에 비하여 철골보의 노출면이 적어 내화 성능에서도 우수한 장점이 있다. 본 연구는 비대칭 H형강을 사용한 슬림플로어 보의 화재시 구조 성능에 관한 연구로 표준화재조건에서 강재 단면의 형상 변화를 통한 구조물의 내화 거동과 재하 하중비를 변수로 화재시 구조물의 온도 분포와 처짐을 비교 분석하는 것을 목적으로 한다.

• 항공우주시스템공학회지
• /
• 제12권4호
• /
• pp.9-17
• /
• 2018

이번 연구에서는 폐단면의 시위 방향으로 비대칭 형상을 가지는 복합재료 얇은 벽 보의 와핑 구속효과를 고려한 이론적 해석을 위하여 와핑 함수의 보정에 대한 여러 경우의 수에 대해 비교 연구 결과를 수행하고 그 결과를 제시하였다. 이를 위해 와핑 평형 조건을 만족하도록 1) 단면의 극점의 위치를 이동하지 않고 와핑 함수만을 보정한 경우, 2) 단면의 기존 극점을 이용하고 윤곽선의 형상 함수만을 수정하여 와핑 함수를 보정한 경우, 그리고 3) 단면의 극점의 위치를 이동하여 와핑 함수를 보정한 경우 등에 대해 각 단면의 특성을 서로 비교하였다. 그 결과 이번 연구에서 고려한 세 가지의 방법 가운데 케이스 2)의 경우가 나머지 다른 두 케이스보다 좀 더 연산이 빠르고 간편하게 와핑 함수를 유도할 수 있음을 밝혔다.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2002년도 유체기계 연구개발 발표회 논문집
• /
• pp.370-377
• /
• 2002

Generally, the system of calculation for the multi-path ultrasonic flow meters can be divided into two methods by how to get the mean velocity, namely, weighting and direct method. Weighting-method derive the mean velocity through modeling in theoretical velocity profile. Direct-method derive the mean velocity though actual flow distribution. The system of calculation varies with maker's transducer configuration and integration method. Each system has merits and demerits. This paper describes the system of integration that calculates line velocity over cross-section of the circular pipe. Flow rate mr discussed in this paper is a difference between theoretical flow rate and integrated flow rate according to values of Reynolds number in symmetric flow field or theoretical flow rate and integrated flow rate according to rotated model in asymmetric flow field.

• 한국산학기술학회논문지
• /
• 제11권8호
• /
• pp.2734-2740
• /
• 2010

미분구적법을 이용하여, 전단변형을 고려하지 않은, 단면적이 변하는 비대칭 곡선 보의 면내 자유진동을 해석하였다. 다양한 경계조건 및 굽힘 각에 따른 진동수를 계산하였고, 그 결과를 다른 수치해석들과 비교하였다. 미분구적법은 비교적 적은 요소를 사용하고도 정확한 해석결과를 보여준다.

• 대한기계학회논문집B
• /
• 제22권11호
• /
• pp.1610-1624
• /
• 1998

An axisymmetric jet is forced with two helical fundamental waves of identical frequency spinning in opposite directions and an additional axisymmetric sub harmonic wave. The subharmonic component rapidly grows downstream from subharmonic resonance with the fundamental, significantly depending on the initial phase difference. The variations of the subharmonic amplitude with the initial phase difference show cusp-like shapes. The amplification of the sub harmonic results in 'vortex pairing of helical modes'. Furthermore, azimuthal variation of the amplification induces an asymmetric jet cross-section. When the initial subharmonics is imposed with an initial phase difference close to a critical value, the jet-cross section evolves into a three-lobed shape. One lobe is generated by the enhanced vortex pairing and the other two lobes are generated by the delayed vortex pairing. Thus, it is confirmed that the initial phase difference between the fundamental and the subharmonic plays an important role in controlling the jet cross-section.

• 지질공학
• /
• 제28권3호
• /
• pp.397-409
• /
• 2018

일본 시코쿠 서부의 이즈미 퇴적분지는 중앙구조선의 굴곡부(사쿠라기 굴곡) 서쪽에 널리 분포하고 있다. 시코쿠 서부의 이즈미 퇴적분지의 형성 메커니즘은 아직 잘 알려지지 않고 있다. 이즈미 퇴적분지의 층서는 일반적으로 굴곡부를 향해서 퇴적시기가 젊게 퇴적되는 경향을 보인다. 이 특징은 비대칭 pull-apart 퇴적분지와 비슷하다. 그래서, 이즈미 퇴적분지가 비대칭 pull-apart 퇴적분지인지에 대한 연구를 아날로그 모델실험을 이용하여 수행하였다. 실험을 실시하여 길이 60 cm, 폭 20 cm 정도의 퇴적 분지가 형성되었다. 모래 표면에는 퇴적분지를 감싸듯 2차 단층으로 정단층이 나타났다. 또한, 변위방향과 평행한 단면에서는 퇴적한 층이 개방성의 굴곡부를 향해서 층리가 젊어져 가는 구조가 보였다. 변위방향과 수직단면에서는 주로 단층과 반대의 경사를 가진 선상(listric) 정단층이 확인되었다. 이 결과는 이즈미 시코쿠 서부의 퇴적분지와 매우 유사하며, 이즈미 시코쿠 서부의 퇴적분지가 비대칭 pull-apart퇴적분지의 가능성을 지지하는 것이다.

• Coupled systems mechanics
• /
• 제9권2호
• /
• pp.183-200
• /
• 2020

Connection of adjacent buildings with stiff links is an efficient approach for seismic pounding mitigation. However, use of highly rigid links might alter the torsional response in asymmetric plans and although this was mentioned in the literature, no quantitative study has been done before to investigate the condition numerically. In this paper, the effect of rigid coupling on the elastic lateral-torsional response of two adjacent one-story column-type buildings has been studied by comparison to uncoupled structures. Three cases are considered, including two similar asymmetric structures, two adjacent asymmetric structures with different dynamic properties and a symmetric system adjacent to an adjacent asymmetric one. After an acceptable validation against the actual earthquake, the traditional random vibration method has been utilized for dynamic analysis under Ideal white noise input. Results demonstrate that rigid coupling may increase or decrease the rotational response, depending on eccentricities, torsional-to-lateral stiffness ratios and relative uncoupled lateral stiffness of adjacent buildings. Results are also discussed for the case of using identical cross section for all columns supporting eachplan. In contrast to symmetric systems, base shear increase in the stiffer building may be avoided when the buildings lateral stiffness ratio is less than 2. However, the eccentricity increases the rotation of the plans for high rotational stiffness of the buildings.