• Journal of the Korean Society of Safety
• /
• v.32 no.4
• /
• pp.66-72
• /
• 2017

Recently, the use of high-strength concrete is increasing due to the trend of constructing high-rise and long span structures. The benefit of using the high-strength concrete is that it increases the durability and strength while it reduces the cross-sectional area of the bridge deck slabs. Moreover, it offers more safety as these bridge deck slabs applying high-strength requires strict structural performance verification. In this study, the fatigue performance of the bridge deck slabs applying 80 MPa high-strength concrete was verified through various experiments. The experimental results showed that the specimens satisfy the conditions of flexural strength, punching shear strength, deflection and cracking. In conclusion, the bridge deck slabs designed by 80 MPa high-strength concrete are enough safe despite of its low thickness.

• Journal of the Korean Home Economics Association
• /
• v.44 no.3 s.217
• /
• pp.51-59
• /
• 2006

The purpose of this study is to determine the relevant variables of parent-leadership that influence family strength based on the transformational leadership and transactional leadership proposed by Bernard M. Bass and to investigate the primary impact of leadership on the subordinate's job satisfaction and job involvement to his/her supervisor. Therefore, this study will provide implications for the family through a diagnosis of the effect by leadership. The results of this research are as follows : 1) How is the relationship of parent-leadership and family strength? A positive correlation was found between transformational leadership scores and family strength. A negative correlation was found between nontransactional leadership scores and family strength. 2) How had transformational leadership and transactional leadership affected on the family strength? Transformational leadership had the strongest effect on family strength. How had the 7 sub- factors of transformational/transactional leadership affected family strength? Idealized influence and contingent reward had strong effect on family strength but management by except had a negative effect on family strength.

• PNF and Movement
• /
• v.20 no.1
• /
• pp.125-134
• /
• 2022

Purpose: The aim of this study was to establish an association between grip strength and gait variability in the elderly. Methods: The participants in this experiment (n = 20) were aged 65 or older. Power grip and lateral pinch forces were obtained in grip strength tests, and spatiotemporal gait parameters were collected from IMU sensors during 6 min actual walking to test the gait of participants. The collected gait parameters were converted to coefficient of variation (CV) values. To confirm the association between grip strength and gait variability, a partial correlation analysis was conducted in which height, weight, and gait speed were input as controlling variables. Results: Grip power showed a significant negative correlation with the stride length CV (r = -0.52), and the lateral pinch force showed a significant negative correlation with the stance CV (r = -0.65) and swing CV (r = -0.63). Conclusion: This study reveals that gait variability decreases as grip strength increases, although height, weight, and gait speed were controlled. Thus, grip strength testing, a simple aging evaluation method, can help identify unstable gait in older adults at risk of falling, and grip strength can be utilized as a non-invasive measurement method for frailty management and prevention.

• Journal of Korean Association for Spatial Structures
• /
• v.4 no.4 s.14
• /
• pp.137-144
• /
• 2004

Recently, as steel structures become higher and more long-spanned, application of high-strength steels is increasing gradually. However, criteria and example for design of high-strength steel are not built up. exiting criteria for structural steels is not proper for economical design of high-strength steel. Moreover, exiting criteria will be decrease the fatigue performance of steel bridge using high-strength steel. Therefore, criterion for application of high-strength steel must be established. In this paper, the behavior of plate girder using high-strength vertical stiffeners was clarified by carrying out layer elastic-plastic finite element analysis using finite deformation theory. In order to optimize the design and construction of plate girder using high-strength vertical stiffener, criterion for application of high-strength vertical stiffener is proposed.

• Journal of Auto-vehicle Safety Association
• /
• v.11 no.1
• /
• pp.40-47
• /
• 2019

First, three point bending analysis for the inclined press door impact beam was carried out to investigate inclination angle effect on the maximum strength with varying support distance. Next, for the system model with spring elements representing body stiffness at door mounting area, the bending structural behavior of impact beam mounted on vehicle was estimated. The mounting distance and inclination angle were changed and the beam bending buckling strength was presumed at the head displacement below which spring stiffness change has little effect on the load. Finally strength ratio to predict the bending buckling strength of impact beam mounted on vehicle from three point bending maximum strength of fixed support distance was suggested.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.15 no.2
• /
• pp.57-64
• /
• 2013

As the clothing materials have been more functional and advanced, the cotton fabrics for dress shirts or blouses have been more qualified and the sewability for high degree of completion has been required. This study aims to identify the seam strength depending on the change of stitch density of fine cotton fabrics by fabric and thread and so the general seam performance of fine cotton fabrics by analyzing the seam efficiency and breaking mode of seams. For an experiment, 3 kinds of fine cotton fabrics and 2 kinds of threads were selected and the sample was made by changing the stitch density by four steps. Then, the seam strength was measured. Next, the seam efficiency and breaking mode of seams were analyzed on the basis of the results of seam strength measurement. The results are as follows: All fabrics showed the similar tendency in seam strength. The seam strength is related to the tensile strength and thread strength, it increased only to a certain stitch density. When the stitch density exceeded a certain level, fabrics were destroyed or threads were cut. Then, the seam strength didn't increase. Furthermore, the more the seam strength increased, the more the seam efficiency increased. For increasing the maximum stitch density, it was required to use the fabrics and threads which had similar properties, in other words, the high thread strength for the high tensile strength and the low thread strength for the high tensile strength.

• Korean Journal of Cognitive Science
• /
• v.34 no.1
• /
• pp.21-38
• /
• 2023

The present study was designed to investigate the effect of the difficulty level of retrieval practice and the association strength of categories and stimuli within categories on memory inhibition. Most of the studies have investigated whether inhibition was occurred by manipulating the degree of association strength, emotion value or physical characteristics of non-retrieval practice words within the retrieval practice category. Therefore, it was necessary to study how inhibition occurs according to the degree of difficulty of retrieval stimuli during retrieval practice. The difficulty of retrieval was manipulated into three levels: difficult condition, normal condition, and easy condition through the degree of presentation of consonants and vowels of words during retrieval learning. Additionally, the strength of association between categories and words within categories was manipulated. In previous studies, retrieval-induced forgetting occurred under conditions where the association strength between categories and words within the categories was strong. On the other hand, retrieval-induced forgetting did not occur under conditions where the association strength between categories and words within the categories was weak. The present study, if the inhibition process differs according to the difficulty of retrieval, the possibility of different results from previous studies was explored according to the difference in the strength of association with the category. As a result of the study, in the condition of strong association strength, retrieval-induced forgetting was observed under normal and difficult retrieval difficulty conditions. Whereas retrieval-induced forgetting was not observed under conditions of easy retrieval difficulty condition. In the condition of weak association strength, retrieval-induced forgetting tended to occur under difficult retrieval difficulty conditions. Whereas retrieval-induced forgetting was not observed under conditions of normal and easy retrieval difficulty condition. These results suggest that memory inhibition may appear differently depending on the difficulty of retrieval.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.11 no.2
• /
• pp.31-39
• /
• 2011

Concrete-filled steel tube(CFT) columns have become popular for building construction due to not only composite effect of steel tube and infilled concrete, but also more economical. The purpose of this paper is to propose the applicable boundary formula of width-to-thickness ratio for rectangular steel tube as using CFT column. A parametric study was performed taking width-to-thickness ratio of rectangular steel tube and compressive strength of concrete as the main parameter. The strength of concrete are selected to 30, 60, 90MPa. The non-linear analysis was adopted in order to take into account the effect of concrete strength. Finally, from the test and analysis results, the effect of increasing strength according to concrete strength and width-to-thickness of steel tube and plastic behavior of specimens were verified distinctly.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 1999.11b
• /
• pp.186-191
• /
• 1999

Results are shown on the preparation and characterization of homopolymer of 2-methacryloyloxyethyl isocyanate(MOI) ad copolymers of MOI with styrene synthesized by radical polymerization. The significant effectiveness of the polymers as additives for paper dry and wet strength was found. Dry strength can be increased by 75% and wet strength retention of sheets can reach 30% based on the increased dry strength and about 50% based on the dry strength of untreated sheet. Based on isocyanate group consumption, copolymers containing less isocyanate can give better effect than homopolymer in sheet wet strength improvement. Furthermore, the base paper containing a small amount of polyallylamine hydrochloride was used for polymer treatment and got higher wet strength improvement.

• The Journal of the Korea Contents Association
• /
• v.14 no.4
• /
• pp.267-276
• /
• 2014

The purpose of the study is to examine the influence of family stress on family adaptation and investigate the mediating effect of family strength on the association between family stress and family adaptation of disabled family. As a result, family stress bas also been from multiple regression analysis revealed that family stress has a significant effect on family adaptation through family strength. Family strength is found to have a full mediation effect. In summary, the findings suggest that disabled family with higher levels of family stress are more likely to have lower family strength and lower family strength decreases the probability of conducting family adaptation. Based on these results, the researchers suggest intervention strategies that could prevent family stress, family strength and family adaptation.