• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.1
• /
• pp.96-102
• /
• 2004

For sensitivity enhancement, the general assisted-GPS acquisition method adopts not only the coherent accumulation technique but also the non-coherent accumulation technique since the long coherent accumulation period increases the number of frequency search cells. But the non-coherent accumulation technique causes tile squaring loss, which is a dominant factor among the acquisition losses of assisted GPS dealing with weak GPS signals. This paper derives the squaring loss of the previous assisted-GPS acquisition method and proposes an assisted-GPS acquisition method for solving the problem of squaring loss in weak signal environment. In this paper, it is explained that the proposed assisted-GPS acquisition method prevents the squaring loss using a coupled coherent accumulation technique and the number of search cells of the proposed assisted-GPS acquisition method is much smaller than that of the previous assisted-GPS acquisition method. Finally, through the simulation by the GPS simulator, the acquisition success rate of the proposed assisted-GPS acquisition method is compared with that of the previous assisted-GPS acquisition method and the acquisition improvements are shown in weak signal environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.11B
• /
• pp.1618-1623
• /
• 2010

In this paper, we propose a new assisted global positioning system (A-GPS) using terrestrial digital multimedia broadcasting (T-DMB) data services. Because of the weak signal strength from GPS satellite and the signal blockage, it is difficult for the telematics terminal to determine the position in urban area. Proposed A-GPS system calculates pseudo range (PR) from timing information of GPS satellites and obtains the satellite information such as ephemeris from T-DMB station to determine the current position. Compared to conventional GPS system, the proposed system has better performance in terms of the fast time to first fix (TTFF), low horizontal dilution of precision (HDOP). Experimental results show that the proposed system is a feasible and robust solution.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.33.6-33
• /
• 2002

For RF sensitivity enhancement, the previous assisted GPS acquisition architecture adopts not only the coherent integration technique but also the non-coherent integration technique since the long coherent integration time increases the number of the frequency search cells. But the non-coherent integration technique induces the squaring loss, which is the dominant factor among the acquisition losses of assisted GPS dealing with weak GPS signals. This paper proposes an efficient architecture for weak signal acquisition in assisted GPS. In this paper, it is explained that the proposed architecture reduces the squaring loss using a modified non-coherent integration technique. Furthermore, it is..

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.9
• /
• pp.963-968
• /
• 2008

A new method to deal with GPS indoor positioning by means of time synchronized switching GPS repeater has been developed by authors[1]. But the developed indoor positioning system has problems. Therefore, we proposed a method for indoor positioning using GNSS Repeater-Assisted. To solve the 3-dimensional user's position, the 4 or more retransmission antennas are needed in the previously proposed methods. If a GPS repeater periodically transmits the signal like as pseudollite, the information for assisting an acquisition and tracking can be informed to receiver. Then, the user position can be calculated using the induced weak signal. The advantage of the proposed algorithm is use of only 1 re-transmission antenna because the re-transmitted signal are not used for positioning but used for assisting an acquisition and tracking weak signals induced indoor. We analyze the propose algorithms through the experiment and performed the test of feasibility.

• Proceedings of the KIEE Conference
• /
• 2004.07d
• /
• pp.2350-2352
• /
• 2004

This paper presents the implementation-tation of the real-time software GPS Receiver based on FFT and FLL assisted PLL tracking algorithm. The FFT(fast fourier transform) based GPS si-gnal acquisition scheme provides a fast TTFF(time to first fix) performance. The tracking based on FLL assisted PLL enables tracking of GPS signal in a high dynamic environment. The designed software GPS receiver uses the indexing method for generating replica carrier to reduce computation load. The performance of the implemented GPS receiver is evaluated using high-dynamic simulated data from a simulator and real static data.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.67-70
• /
• 2006

For a long time the GSM and GPS world has been living side by side. There have been some half hearted attempts to invoke the GPS unit into GSM units but performance and usability has suffered. The A-GPS approach is interesting and we wanted to verify general performance for fleet application and alarm/emergency situations. The result is now promising but still more to enhancements are anticipated. We achieved near acceptable availability (${\sim}70%$) under indoor conditions. Accuracy was as anticipated (50-100 meter) as we are using reflected signals. Time to first fix is in general good in outdoor conditions but too long for indoor conditions (45-60 seconds). We would like manufactures to put some more effort to get better performance in the future as test with Nordnav high sensitivity measurement system proves that conditions indoor are at a level where better performance should be possible.

• ICROS
• /
• v.9 no.2
• /
• pp.23-26
• /
• 2003

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.17 no.3
• /
• pp.283-292
• /
• 1999

Aerotriangulation for the large scale mapping(photo-scale l/5,000) was studied with the projection center determined by kinematic DGPS positioning. For the feasibility study, the accuracy and error was analyzed with the comparison between a projection center from the conventional model adjustment and the projection center determined by the kinematic DGPS positioning. Kinematic DGPS-supported Bundle adjustment was also performed. The accuracy of projection center, determined by L1 phase data observed within 30 km from base station, was stable, and the planimetric accuracy(RMS) is 13 cm and the vertical accuracy(RMS) is 15 cm with 4 ground control points, which satisfies the national standard of digital mapping. Thus, this study shows that GPS-assisted aerotriangulation can be used for economic digital mapping.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.7
• /
• pp.646-652
• /
• 2013

EU's Galileo project is a market-based GNSS (Global Navigation Satellite System) that is under development. It is expected that Galileo will provide the positioning services based on new technologies in 2020s. Because Galileo E1 signal for OS (Open Service) shares the same center frequency with GPS L1 C/A signal, CBOC (Composite Binary Offset Carrier) modulation scheme is used in the E1 signal to guarantee interoperability between two systems. With E1 signal consisting of a data channel and a pilot channel at the same frequency band, there exist several options in designing signal acquisition for Assisted-Galileo receivers. Furthermore, compared to SNR worksheet of Assisted-GPS, some factors should be examined in Assisted-Galileo due to different correlation profile and code length of E1 signal. This paper presents SNR worksheets of Galileo E1 signals in E1-B and E1-C channel. Three implementation losses that are quite different from GPS are mainly analyzed in establishing SNR worksheets. In the worksheet, hybrid long integration of 1.5s is considered to acquire weak signal less than -150dBm. Simulation results show that the final SNR of E1-B signal with -150dBm is 19.4dB and that of E1-C signal is 25.2dB. Comparison of relative computation shows that E1-B channel is more profitable to acquire the strongest signal in weak signal environment. With information from the first satellite signal acquisition, fast acquisition of the weak signal around -155dBm can be performed with E1-C signal in the subsequent satellites.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2009.04a
• /
• pp.129-132
• /
• 2009

Automatic target recognition surveying method is very important technology one-man surveying system. But in the case of loss of prism's position, it have to be re-tracking for searching it, consuming the searching time and complicated in processing. In this study, it is proposed new GPS receiver combination technology for orientation of both. In conclusion, the robotic TS(totalstation) is well assisted by absolute coordinates from single GPS receiver and multi-functional surveying instrument.