• Journal of Radiation Industry
• /
• v.18 no.1
• /
• pp.43-52
• /
• 2024

Currently, there are no interim storage facilities and permanent disposal facilities in Korea, so all spent nuclear fuels are temporarily stored. However, the temporary storage facility is approaching saturation, and as a measure to this, the 2nd Basic Plan for the Management of High-Level Radioactive Waste presented an operation plan for dry interim storage facilities and dry temporary storage facilities on the NPP on-site. The dry storage can be operated in various ways, and to select the optimal dry storage method, the reduction of exposure for workers must be considered. Accordingly, it is necessary to develop a worker exposure scenario according to the dry storage method and evaluate and compare the radiological impact for each method. The purpose of this study is to develop an exposure scenario for workers transporting spent nuclear fuel by dry storage method. To this end, first, the operation procedure of the foreign commercial spent nuclear fuel dry storage system was analyzed based on the Final Safety Analysis Report (FSAR). 1) the concrete overpack-based system, 2) the metal overpack-based system, and 3) the vertical storage module-based system were selected for analysis. Factors were assumed that could affect the type of work (working distance, working hours, number of workers, etc.) during transportation work. Finally, the work type of the processes involved in transporting spent nuclear fuel by dry storage method was set, and an exposure scenario was developed accordingly. The concrete overpack method, the metal overpack method, and the vertical storage module method were classified into a total of 31, 9, and 23 processes, respectively. The work distance, work time, and number of workers for each process were set. The product of working hours and number of workers (Man-hour) was set high in the order of concrete overpack method, vertical storage module method, and metal overpack method, and short-range work (10 cm) was most often applied to the concrete overpack method. The results of this study are expected to be used as basic data for performing radiological comparisons of transport workers by dry storage method of spent nuclear fuel.

• Journal of the Korean Geosynthetics Society
• /
• v.18 no.4
• /
• pp.75-85
• /
• 2019

The lateral load from traffic depends on standard truck's axle loads and locations, loading distance from the inner wall. The method of limit state design has been adopted and used for design of roads in the Republic of Korea since 2015. The concept of equivalent height of soil accounting for traffic loading is often used for design of retaining walls to quantify the traffic loads transmitted to the inner wall faces. Due to the different characteristics of the standard design trucks between Korea and US (AASHTO), the direct use of the guidelines from AASHTO LRFD leads to incorrect estimation of traffic load effects on retaining walls. This paper presents the results of evaluation of equivalent height of soil to reflect the standard truck of the nation, based on the findings from analytical solutions using 3D finite element method. Compare to US, the standard truck loading has a structure where the axle load is concentrated so that the equivalent load height is estimated to be slightly larger than AASHTO for lower retaining wall height. It would be reasonable to present the equivalent load height in Korea more conservatively than AASHTO in terms of securing long term stability of the retaining wall structure.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.5
• /
• pp.534-540
• /
• 2013

Interest of the hand effect on the electromagnetic wave are internationally increasing with the increase of the use of the mobile phone. IEC TC106(International Electrotechnical Commission, Technical Committee 106) promotes international research exchange program in order to reflect the effect of human hands in the standard assessment method of human exposure dosimetry by the electromagnetic wave of mobile phones. Since current commercialized hand phantom is manufactured by taking into account the average size of westerners and provides only one grip posture, it imposes many restrictions on the accurate SAR measurement. Therefore, the development of proper hand phantom accounting for domestic situation and various grip posture capability is essential in order to analyze the accurate effect of human hand on the exposure estimation. In this paper, a jelly hand phantom suitable for Korean was manufactured with various grip posture capability at 835 MHz and 1,800 MHz bands. Although the tolerances of permittivity and conductivity of the manufactured hand phantom are with ${\pm}10%$ each, it was much less than CTIA(Cellular Telecommunication Industry Association) tolerance of ${\pm}20%$ at both bands. Its 3D CAD(3 Dimensional Computer Aided Design) file which was developed can be utilized for the simulation of human hand effect on SAR measurement of mobile phones. The findings in this study can be utilized for the analysis of human hand effect on SAR measurement of a mobile phone.

• Journal of the Korean Institute of Gas
• /
• v.7 no.1 s.18
• /
• pp.1-9
• /
• 2003

A Multi-distinction Equipment Screening Algorithm (MESA) is proposed. It selectively integrates Dow's F&EI as its process hazard index technique and ESA (Equipment Screening Algorithm) as qualitative hazard classification technique, and retrieves a detailed list of hazardous equipments with the total hazard indices of those equipments. The inherent expert system, which includes the accident scenarios of the equipments and processes and experts' views of them, narrows further down the list of hazardous equipments and recommends only the most notable candidates. Through the case study of distinguishing the hazardous ranking of the equipments of the LPG underground storage process, using the expert system or not, the applicability of MESA has been validated. Taking the characteristics of the process equipments with hazardous ranking in the point of process intrinsic safety, this proposed algorithm would contribute to providing engineers or managers with information on constructing safely devices and mitigation devices and on scheduling emergency response planning.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.17 no.1
• /
• pp.1-7
• /
• 2014

This paper aims to explain the safety assessment and remediation mechanism of Granulated Coal Ash (GCA) as a material for the remediation of coastal sediments and to evaluate the improvement of the sediment in Kaita Bay, where GCA was applied. The concentrations of heavy metal contained in GCA and the dissolved amounts of heavy metal from GCA satisfied the criteria for soil and water pollution in Japan. The mechanisms on the remediation of coastal sediments using GCA is summarized as follows; (1) removal of phosphate and hydrogen sulfide (2) neutralization of acidic sediment (3) oxidation of reductive sediment (4) increase of water permeability (5) increase of soil strength (6) material for a base of seagrass. From the results obtained from the field experiment carried out in Kaita Bay, it was clarified that GCA is a promizing material for remediation of coastal sediment. This remediation technology can contribute to promote waste reduction in society and to decrease cost of coastal sediment remediation by applying GCA in other polluted coastal areas.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.28 no.4
• /
• pp.382-392
• /
• 2018

Objective: Allergic diseases such as asthma due to fungal exposure in houses have increased, and proper management is urgent. Mold can grow in the air, floor, walls, and other areas according to environmental conditions, and there are many limitations to the conventional methodology for examining fungal exposure. For this reason, the degree of fungal contamination is being evaluated by ERMI (Environmental Relative Moldiness Index), a quantitative analysis method proposed by the EPA. In this study, we compared ERMI values between water-damaged dwellings and non-damaged ones to evaluate the effectiveness of Korean ERMI values. We also explored the association of ERMI values with the level of airborne mold and characteristics of dwellings. Methods: Floor dust was collected after installing a Dustream collector on the suction port of a vacuum cleaner. The collected samples were filtered to remove only 5 mg of dust, and DNA was extracted using the FastDNA SPIN KIT protocol. Results: The ERMI values were found to be 19.6 (-6.9-58.8) for flooded houses, 7.5 (-29.2-48.3) for leaks/condensation, and 0.8 (-29.2-37.9) for non-damaged dwellings. The airborne concentration of mold for flooded, leakage or condensed, and non-damaged houses were $684CFU/m^3$, $566CFU/m^3$, and $378CFU/m^3$, respectively. The correlation between ERMI values and the levels of airborne mold was low (R = 0.038), but a weakly significant association of the ERMI values with the concentration of particulate matter ($PM_{10}$) was observed as well(R=0.231,P<0.05). Conclusions: Our findings show that the reference value using ERMI can be used to distinguish water-damaged and non-damaged dwellings. It is believed that ERMI values could be a promising tool for assessing long-term fungal exposure in dwellings.

• Korean Journal of Environmental Agriculture
• /
• v.41 no.2
• /
• pp.108-114
• /
• 2022

BACKGROUND: This study was performed to determine residual characteristics of soil-treated metalaxyl-M and dinotefuran in crown daisy and to evaluate the risks from intake of the residual pesticides in the crop. METHODS AND RESULTS: The pesticide granules were treated in soil on two levels, and the plants samples were collected 51 days after seeding. The analytes were extracted and partitioned using the QuEChERS extraction packet (MgSO₄ 4 g, NaCl 1 g). The quantitative methods for metalaxyl-M and dinotefuran were validated in linearity, accuracy, and precision. Risk assessments of the pesticides were performed using Korea national nutrition statistics 2019. CONCLUSION(S): The residual concentrations of metalaxyl-M in crown daisy were 0.09-0.10 mg/kg (for the treatment at 6 kg/10 a) and 0.17-0.19 mg/kg (12 kg/10 a), respectively. The residual concentrations of dinotefuran in the crop were 0.53-0.75 mg/kg (3 kg/10 a) and 1.17-1.26 mg/kg (6 kg/10 a). The amounts of pesticides were less than MRL (Maximum Residue Limits) according to the Korean MFDS (Ministry of Food and Drug Safety). The HI (Hazard Index) of metalaxyl-M and dinotefuran for consumers was 0.0075% and 0.2250%, respectively. For females in the age between 50-64, the major consumer group, the HIs of the pesticides were <3%. Considering the consumption of crown daisy, they are not considered to be of toxicological concern.

• Nuclear Engineering and Technology
• /
• v.56 no.5
• /
• pp.1925-1931
• /
• 2024

The study conducted in the northwest region of Jordan aimed to assess the levels of natural radioactivity in soil and olive mill pomace (OMP) samples. The researchers used Nal (TI) gamma-ray spectrometry to measure the activity concentrations of ²²⁶Ra, ²³²Th, ⁴⁰K, and ¹³⁷Cs in the samples. The average activity concentrations of ²²⁶Ra, ²³²Th, ⁴⁰K, and ¹³⁷Cs in the soil samples were found to be 18.624 ± 5.82, 12.276 ± 5.728, 518.33 ± 212.57, and 0.140 ± 0.09 (Bq, kg^-1), respectively. In the OMP samples, the average activity concentrations of ²²⁶Ra, ²³²Th, and ⁴⁰K were 7.272 ± 4.386, 3.454 ± 1.503, and 169.997 ± 81.873 (Bq kg^-1), respectively, and no ¹³⁷Cs was detected. The study also investigated fundamental parameters associated with radon, specifically the radon emanation coefficient (Rn_EC) and radon mass exhalation rate (E_x). The Rn_EC values ranged from 0.621 to 0.78 (Bq kg^-1), with an average value of 0.71 ± 0.06 (Bq kg^-1). The estimated E_x from the soil samples ranged from 65.83 to 124.86 (mBq kg^-1h^-1), with an average value of 99.74 ± 21.73 (mBq kg^-1h^-1). Regarding radiological hazards, the study examined various parameters, including radium equivalent activity, external and internal hazard indices, gamma and alpha indices, absorbed gamma dose rate, and excess lifetime cancer risk. All of these assessed values were found to be below the worldwide recommended limits for radiological safety. Additionally, the study analyzed the concentrations of gross alpha and gross beta radioactivities in soil and OMP samples. The soil samples had an average gross alpha activity of 4.642 ± 1.04 (Bq kg^-1) and an average gross beta activity of 48.13 ± 14.50 (Bq kg^-1). The OMP samples showed an average gross alpha activity of 0.32 ± 0.27 (Bq kg^-1) and an average gross beta activity of 59.19 ± 12.94 (Bq kg^-1). Overall, the obtained results are crucial for evaluating the radiological risks associated with natural radioactivity in the northwest region of Jordan. The findings establish baseline data for comparison and reference for radioactivity levels in the environment.

• Journal of Navigation and Port Research
• /
• v.31 no.3 s.119
• /
• pp.271-279
• /
• 2007

Ship structures are basically an assembly of plate elements and estimation load-carrying capacity or the ultimate strength is one of the most important criterion for estimated safety assessment and rational design on the ship structure. Also, Structural elements making up ship plated structures do not work separately against external load. One of the critical collapse events of a ship structure is the occurrence of overall buckling and plastic collapse of deck or bottom structure subjected to longitudinal bending. So, the deck and the bottom plates are reinforced by a number af longitudinal stiffeners to increase their strength and load-carrying capacity. For a rational design avoiding such a sudden collapse, it is very important to know the buckling and plastic behaviour or collapse pattern of the stiffened plate under axial compression. In this present study, to investigate effect af modeling range, the finite element method are used and their results are compared varying the analysis ranges. When making the FEA model, six types of structural modeling are adopted varying the cross section of stiffener. In the present paper, a series of FEM elastoplastic large deflection analyses is performed on a stiffened plate with fiat-bar, angle-bar and tee-bar stiffeners. When the applied axial loading, the influences of cross-sectional geometries on collapse behaviour are discussed. The purpose of the present study is examined to numerically calculate the characteristics of buckling and ultimate strength behavior according to the analysis method of ship's stiffened plate subject to axial loading.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.11
• /
• pp.5385-5389
• /
• 2012

Introduction: Sentinel lymph node biopsy (SLNB) is a precise procedure for lymphatic staging in early breast cancer. In a valid SLNB procedure, axillary lymph node dissection (ALND) can be omitted in nodenegative cases without compromising patient safety. In this study, detection rate, accuracy and false negative rate of SLNB for breast cancer was evaluated in a setting with simple modified conventional pathology facilities without any serial sectioning or immunohistochemistry. Material and Medthod: Patients with confirmed breast cancer were enrolled in the study. SLNB and ALND were performed in all cases. Lymph node metastasis was evaluated in SLN and in nodes removed by ALND to determine the false negative rate. Pathologic assessment was carried out only by modified conventional technique with only 3 sections. Detection rate was determined either by lymphoscintigraphy or during surgery. Results: 78 patients with 79 breast units were evaluated. SLN was detected in 75 of 79 cases (95%) in lymphoscintigraphy and 76 of 79 cases (96%) during surgery. SLN metastases was detected in 30 of 75 (40%) cases either in SLNB and ALND groups. Accuracy of SLNB method for detecting LN metastases was 92%. False negative rate was 3 of 30 of positive cases: 10%. In 7 of 10 cases with axillary lymphadenopathy, LN metastastates was detected. Conclusion: SLNB is recommended for patients with various tumor sizes without palpable lymph nodes. In modified conventional pathologic examination of SLNs, at least macrometastases and some micrometastases could be detected similar to ALND. Consequently, ALND could be omitted in node-negative cases with removal of all palpable LNs. We conclude that SLNB, as one of the most important developments in breast cancer surgery, could be expanded even in areas without sophisticated pathology facilities.