• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.963-966
• /
• 2002

This paper presents a new generic Petri net model for design and performance evaluation of a flexible assembly system with dual kanban. The architectural design of the model is derived from a generic bill of materials and the combination of FMS and FAS concepts. Two approaches for analysis and performance evaluation of the new model base on the theory of invariant analysis and linear programming are also introduced. Finally, the effect of different processing times between FMS-FAS on the number of kanban cards is investigated.

• Nuclear Engineering and Technology
• /
• 제39권6호
• /
• pp.737-746
• /
• 2007

A spacer grid, which is one of the most important structural components in a PWR fuel assembly, supports its fuel rods laterally and vertically. Based on in-house design experience, scrutiny of the design features of advanced nuclear fuels and the patents of other spacer grids, KAERI has devised its own spacer grid shapes and acquired patents. In this study, a performance evaluation of KAERI's spacer grid shapes was carried out from mechanical/structural and thermohydraulic view points. A comparative performance evaluation of commercial spacer grid shapes was also carried out. The comparisons addressed the spring characteristics, fuel rod vibration characteristics, fretting wear resistance, impact strength characteristics, CHF enhancement, and the pressure drop level of the spacer grid shapes. The results show that the performances of KAERI's spacer grid shapes are as good as or better than those of the commercial spacer grid shapes.

• 대한기계학회논문집
• /
• 제14권5호
• /
• pp.1320-1329
• /
• 1990

본 연구에서는 토크로드의 여러가지 성능시험이 하능한 시험기의 설계와 개발 에 관하여 논하려 한다. 토크 로드의 정적 성능은, 반경방향 스프링 특성시험 및 비 틀림 방향 스프링 특성시험 그리고 회전토크 특성시험 등을 통하여 평가된다. 그러 나, 이들 세가지 성능시험을 위한 시험기를 각각 개발할 경우 소요비용이 과다해진다. 따라서, 한정된 예산과 시험기 개발후 시험평가 공정의 간소화 등을 고려하여, 본 시 험기는 3대의 시험기로써 하여야 할 기능을 한대의 시험기로써 할수 있도록 개발하였 다. 시험기 개발에 따른 기술적인 고찰과, 본 시험기로 정하중에서의 토크 로드 부 품의 성능시험을 수행하고 서어보 유압식 구조물 피로 시험기를 사용하여 동 부품의 피로 내구성 시험을 실시하고, 고무의 조성변화, 접착성 개선 등을 통해 내구성을 향 상시킴으로 국산화 개발을 가능케 한 기술적 내용들을 살펴 보고자 한다.

• 한국기계가공학회지
• /
• 제17권2호
• /
• pp.37-46
• /
• 2018

Present research is to evaluate and improve the sealing performance of the duct cap assembly for the ice dispensers through structural analysis. The nonlinear contact problems to check the sealing performance were analyzed using ANSYS software. The results of the analyses related to the sealing performance: the displacement distribution, the contact condition between the cap-silicon and the case, and the pressure distribution on the contact surface, were examined and discussed. Based on the results of the existing design of the duct cap assembly, two cases of the design modifications to improve the sealing performance were introduced. By examining the results of the two cases, a final design improvement plan was proposed and analyzed. It is shown that the sealing performance of the proposed final design is much more favorable than the existing design. The method of structural analysis and design improvement of the duct cap assembly presented in this paper will help improve the sealing performance of the ice dispenser duct caps.

• Steel and Composite Structures
• /
• 제46권6호
• /
• pp.857-865
• /
• 2023

This study aimed to develop a seismic retrofit technique using a steel frame which can be easily transported and assembled on site. This enables the retrofit steel frame to be easily attached to an existing structure minimizing the unwanted gap between the structure and the steel frame assembly. A one-story one-bay RC frame was tested with and without seismic retrofit using the proposed steel frame to verify the seismic retrofit effect of the proposed system, and an analysis model was developed in Opensees for seismic performance evaluation of a case study soft first-story model structure retrofitted with the developed steel frame assembly. Seismic performance of the model structure was also evaluated considering soil structure interaction effect. The experimental study confirmed that the proposed seismic retrofit system can be applied effectively to improve the seismic performance of framed structures. Time history analysis results of the model structure showed that the proposed steel frame assembly was effective in increasing the seismic load resisting capacity of the soft first-story structure. However more steel frame assemblies were required to satisfy the given performance limit state of the model structure located on weak soil due to the negative soil-structure interaction effect.

• Nuclear Engineering and Technology
• /
• 제41권5호
• /
• pp.677-690
• /
• 2009

A previous study demonstrated that the two-row fuel assembly has much more favorable neutron-physical and thermal-hydraulic behavior than the conventional one-row fuel assemblies. Based on the newly developed two-row fuel assembly, an SCWR core is proposed and analyzed. The performance of the proposed core is investigated with 3-D coupled neutron-physical and thermal-hydraulic calculations. During the coupling procedure, the thermal-hydraulic behavior is analyzed using a sub-channel analysis code and the neutron-physical performance is computed with a 3-D diffusion code. This paper presents the main results achieved thus far related to the distribution of some neutronic and thermal-hydraulic parameters. It shows that with adjustment of the coolant and moderator mass flow in different assemblies, promising neutron-physical and thermal-hydraulic behavior of the SCWR core is achieved. A sensitivity study of the heat transfer correlation is also performed. Since the pin power in fuel assemblies can be non-uniform, a sub-channel analysis is necessary in order to investigate the detailed distribution of thermal-hydraulic parameters in the hottest fuel assembly. The sub-channel analysis is performed based on the bundle averaged parameters obtained with the core analysis. With the sub-channel analysis approach, more precise evaluation of the hot channel factor and maximum cladding surface temperature can be achieved. The difference in the results obtained with both the sub-channel analysis and the fuel assembly homogenized method confirms the importance of the sub-channel analysis.

• 한국기계가공학회지
• /
• 제9권5호
• /
• pp.57-63
• /
• 2010

Tolerance analysis is one of the most important processes to improve the image quality of products. High resolution camera module for mobile phones needs precision assembly technology since the module becomes smaller and thinner. This paper will focus on the unit tolerance and the assembly tolerance which can affect the performance of the module. Lens shading and relative illumination were used to evaluate the optical axis scatter for each component on camera and estimate the assembly yield rate based on the evaluation result. A program was developed to analyze the impact on optical axis by each module, then to optimize the dimensions and tolerance for reducing the scatter of optical axis assembly. Through the simulation, though a rate of relative illumination was declined in where optical axis is displaced $100{\mu}m$ from sensor center, MTF performance is not influenced by increasing in optical axis displacement. It was seen that assembly yield was improved in result of simulation after correcting optical axis tolerance.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.1089-1094
• /
• 1993

A pilot system for flexible automatic assembly has been built at ASRI in Seoul National University. The system is designed for being capable of assembling different variants and products. The system consists of three industrial robots, four free-flow conveyors, automatic tool changers, RCC and fixtures. This paper describes the concept and the technical solutions of the developed flexible assembly cell. Results of performance evaluation using colored petri net are also presented and discuss.

• 한국생산제조학회지
• /
• 제23권6호
• /
• pp.602-608
• /
• 2014

Mixed-model production lines are often used in manufacturing systems. In production lines, different product types are simultaneously manufactured by processing small batches. This paper describes a new welding assembly technology involving the development of experimental models for a mixed-model production line in an automobile company. Due to the extensive number of models, the design of a welding assembly system is complicated. Performance evaluation is an important phase in the design of welding assembly lines in a mixed-model production environment. In this study, a new welding assembly technology for a mixed-model production method was used to weld the package tray and dash panel of a vehicle.

• 정보저장시스템학회논문집
• /
• 제4권1호
• /
• pp.19-22
• /
• 2008

For the assembly and evaluation of solid immersion lens (SIL) optical head which is the key component of SIL based near field recording (NFR) technology, we modify the Twyman-Green interferometer. Super-hemisphere SIL optical head for the surface recording is assembled and evaluated by the modified Twyman-Green interferometer. In order to verify the optical performance of the assembled SIL optical head, we compare the measured results of the SIL optical head with the simulation ones. Finally, we show the feasibility of applying the assembled SIL optical head to near field recording system by the experiment of the dynamic gap control based on test bed.