• 제목/요약/키워드: aspect and slope analysis

검색결과 203건 처리시간 0.033초

A Production Method of Landslide Hazard Map by Combining Logistic Regression Analysis and AHP(Analytical Hierarchy Process) Approach Selecting Target Sites for Non-point Source Pollution Management Using Analytic Hierarchy Process

  • Lee, Yong-Joon;Park, Geun-Ae;Kim, Seong-Joon
    • 한국농공학회논문집
    • /
    • 제49권3호
    • /
    • pp.63-68
    • /
    • 2007
  • The LRA(Logistic Regression Analysis) conducts a quantitative analysis by collecting a lot of samples and the AHP(Analytic Hierarchy Program) makes use of expert decision influenced by subjective judgment to a certain degree. This study is to suggest a combination method in mapping landslide hazard by giving equal weight for the result of LRA and AHP. Topographic factors(slope, aspect, elevation), soil dram, soil depth and land use were adopted to classify landslide hazard areas. The three methods(LRA, AHP, the combined approach) was applied to a $520km^2$ region located in the middle of South Korea which have occurred 39 landslides during 1999 and 2003. The suggested method showed 58.9% matching rate for the real landslide sites comparing with the classified areas of high-risk landslide While LRA and AHP Showed 46.1% and 48.7% matching rates respectively. Further studies are recommended to find the optimal combining weight of LRA and AHP with more landslide data.

LiDAR 자료에 의한 지형해석 (Analysis of Terrain by LIDAR Data)

  • 강준묵;윤희천;민관식;위광재
    • 한국측량학회지
    • /
    • 제24권5호
    • /
    • pp.389-397
    • /
    • 2006
  • 본 논문은 라이다 데이터를 활용하여 지형에 대한 3차원 해석을 보여 주는 것이다. 일반적으로, 라이다 측량은 항공레이저스캐너를 이용하여 지표의 정량 및 정성적 정보를 얻을 수 있는 방법이다 획득된 라이다 데이터를 사용해 불규칙 삼각망, 수치표면모형 및 수치표고모형 등의 지형 데이터를 만들어 지형의 가시성, 음영기복, 경사방향 및 경사도와 같은 요소들을 조사했다. 각 항목으로부터 얻은 해석 결과들은 지형해석에 있어서 주요한 요소로 사용되어지며, 라이다 측량이 지형해석을 위한 새로운 방법으로 이용되기를 기대한다.

바람그늘의 기울기가 횡사구의 지형발달에서 담당하는 역할 -거동 공간상의 동역학적 분석을 중심으로- (The Roles of Wind Shadow Aspect Ratio upon the Behaviors of Transverse Dunes : A Dynamics Analysis on the Behavior Space)

  • 류호상
    • 한국지역지리학회지
    • /
    • 제22권4호
    • /
    • pp.887-911
    • /
    • 2016
  • 횡사구는 높이에 반비례하는 속도로 이동하므로 속도가 빠른 작은 사구가 속도가 느린 큰 사구에 계속 충돌한다. 충돌이 병합으로만 이어지면 일정한 규모의 사구열이 정상상태를 유지한 채 이동하는 현상은 설명할 수 없다. 최근 연구들은 사구의 충돌이 병합만을 유발하는 것이 아니라 모래의 재분배로 이어질 수 있다는 데 주목한다. 반면 사구 배후에 발달하는 바람그늘의 역할에 대해서는 아직 상세한 분석이 이루어지지 않았다. 이 연구는 기존 연구들을 토대로 횡사구 거동을 기술하는 지배 방정식을 유도하고, 횡사구의 지형발달을 '거동 공간' 상의 궤적으로 치환 분석하는 기법을 이용하여 바람그늘이 횡사구 지형발달에서 담당하는 역할을 규명하고자 한 것이다. 이를 위해 횡사구를 위치와 높이를 지닌 막대로 단순화하고, 사구의 형태 비율적 특징과 바람맞이 사면에 따른 풍속의 증가 현상, 사구의 모래포집 효율 등의 개념을 토대로 횡사구의 이동과 성장을 결정하는 관계식을 유도하였다. 유도된 관계식은 인접한 두 사구열 높이의 순서쌍으로 정의되는 평면(거동 공간) 상에서 사구의 거동 양상을 결정하는 영역과 사구의 진화 방향을 지시하는 벡터장으로 표현된다. 분석 결과 바람그늘의 기울기는 거동 공간에 수렴 영역을 생성하는 역할을 하지는 못하며, 다만 횡사구 지형발달의 경로에 영향을 미치는 요인으로 작용한다. 이 논문의 모형은 횡사구의 지형 안정성을 재현하지는 못했지만, 사구 간격-높이 관계의 지수를 관측값과 유사하게 제시한다는 점에서 주목할 만하다.

  • PDF

GIS 기법을 이용한 지형적 특성에 따른 월악산 소나무 연륜생장의 이질성 규명 (Analysis of Heterogeneous Tree-Ring Growths of Pinus densiflora with Various Topographical Characteristics in Mt. Worak Using GIS)

  • 서정욱;김재수;박원규
    • The Korean Journal of Ecology
    • /
    • 제23권1호
    • /
    • pp.25-32
    • /
    • 2000
  • 소나무 직경생장과 기후인자(월 평균기온과 총강수량)와의 관계를 지형적 특성에 따라 분석하기 위하여 월악산국립공원에서 선정한 20개의 임분에서 각각 10여 본의 임목에 대한 연륜을 측정하였다. 각 연륜계열들은 크로스데이팅 한 후, 임령과 임분동태에 따른 임목생장 추세를 제거하기 위하여 표준화함으로써 임분별 연륜연대기를 작성하였다. 연륜의 생장경향을 이용한 집락분석의 결과 20개 임분을 4개의 집락으로 분류할 수 있었다. 집락 Ⅰ 의 사면 방향은 북쪽이었으나, 다른 집락들은 대부분 남족과 남서쪽이었다. 고도는 집락Ⅰ(1개 임분), 집락Ⅱ(10개 임분), 집락Ⅲ(2개 임분)이 305∼580 m이었으나, 집락Ⅳ(7개 임분)는 다른 집락들보다 높은 450~870 m이었다 이중 집락Ⅱ는 다른 집락보다 토심이 얕은 급경사의 암석지에 위치하였다. 지형에 따른 기후인자들과 연륜생장과의 관계를 분석하기 위해 반응함수를 집락별로 실시하였다. 집락Ⅰ은 북사면의 다소 중습한 지역에 위치하여 다른 집락보다 기후인자의 영향을 많이 받지 않았다. 집락 Ⅱ는 강수가 임목생장을 제한하는 주요인으로 나타났는데, 이는 집락 Ⅱ가 낮은 고도에 위치하면서 토심이 얕은 급경사의 암석지에 위치하여 수분에 대한 임목생장의 민감도가 증가한 것이라 생각된다. 집락Ⅲ과 집락Ⅳ는 집락Ⅱ에 비하여 임목생장 개시 이전의 겨울과 이른봄의 기온이 보다 중요한 인자로 나타났다. 이런 결과는 고도 상승에 따른 기온 감소(집락Ⅳ)나 계곡부의 미소지형적 특성에 따른 온도 저하(집락Ⅲ)로 발생되는 결과라 생각된다. 이상의 결과는 GIS를 이용하여 수치화 하여 연륜과 지형이 갖는 시-공간적 정보들을 동시에 분석한 결과이다.

  • PDF

화강암질 풍화토 절토비탈면의 식생구조 분석 - 경상도와 전라도 임도를 중심으로 - (Analysis on the Vegetation Structure of the Decomposed Granite Cut-slope - In case study on forest road of Gyeongsang-do and Jeolla-do -)

  • 송호경;박관수;이준우;이미정;김효정;권오원
    • 한국환경복원기술학회지
    • /
    • 제7권1호
    • /
    • pp.59-67
    • /
    • 2004
  • This study was carried out to select proper species for early stage replantation in granite forest roads cut-slope. From one to fourteen year elapsed forest roads in eight regional areas of Gyeongsang-do and Jeolla-do, sample plots were selected, and their vegetations and environmental factors were investigated. Soil organic matter, total nitrogen, soil moisture content, and bulk density in the granite weathering soils were below 0.4%, 0.03%, 12.4%, and above 1.2g/$cm^3$, respectively. The result indicated that the soil was not good for plant growth. The environmental factors affecting distribution of species in the granite forest roads were the elapsed year, elevation, and cut-slope aspect. Invaded species with high frequency in the forest road cut-slope ordered Pinus densiflora, Lespedeza bicolor, Rubus crataegifolius, Alnus hirsuta, Youngia denticulata, Patrinia villosa, Artemisia princeps var. orientalis, Zanthoxylum schinifolium, and Dactylis glomerata. Herbs seeded in earth stage such as Dactylis glomerata, Eragrostis curvula, Festuca arundinacea, Lespedeza sp., and Amorpha fruticosa had changed into perennial herbs and shrubs such as Youngia denticulata, Patrinia villosa, Aster scaber, Patrinia scabiosaefolia, Melica onoei, Astilbe chinensis var. davidii, Chrysanthemum zawadskii var. latilobum, Pueraria thunbergiana, Stephanandra incisa, and Clematis apiifolia, and had changed into plants such as Artemisia princeps var. orientalis, Artemisia keiskeana, Miscanthus sinensis, Pinus densiflora, Rhododendron mucronulatum, Rubus crataegifolius, and Zanthoxylum schinifolium according to elapsed year of forest roads. Leguma such as Lespedeza sp., Pueraria thunbergiana, Amorpha fruticosa, etc., herbs such as Artemisia keiskeana, Artemisia princeps var. orientalis, Chrysanthemum zawadskii var. latilobum, Miscanthus sinensis, etc., and woody plants such as Pinus densiflora, Rubus crataegifolius, Rhododendron mucronulatum, etc., with foreign herbs were considered as proper species for replantation in granite forest road cut-slope.

산지사면(山地斜面)의 붕괴위험도(崩壞危險度) 예측(豫測)모델의 개발(開發) 및 실용화(實用化) 방안(方案) (Studies on Development of Prediction Model of Landslide Hazard and Its Utilization)

  • 마호섭
    • 한국산림과학회지
    • /
    • 제83권2호
    • /
    • pp.175-190
    • /
    • 1994
  • 산지사면붕괴(山地斜面崩壞)에 의(依)한 피해(被害)를 예방(豫防) 또는 극소화(極小化)하기 위(爲)하여 산사태(山沙汰)가 자주 발생(發生)하는 지역(地域)을 중심(中心)으로 각(各) 조사(調査) 단위사면(單位斜面)에 대(對)하여 산지사면붕괴(山地斜面崩壞)에 영향(影響)하리라고 예상(豫想)되는 12개(個) 환경요인(環境要因)을 현지조사(現地調査)하고 붕괴(崩壞)와 환경인자(環境因子)와의 관계(關係)를 수량화(數量化) 이론(理論)에 의(依)한 방법(方法)으로 분석(分析)하여 산사태발생(山沙汰發生)의 위험도(危險度)를 평가(評價)할 수 있는 예측(豫測)모델을 도출(導出)하였으며, 또한 이를 기초(基礎)로 하여 위험도(危險度)를 각(各) 급별(級別)로 구분(區分)하고 예지(豫知)모델을 검토(檢討)하였던 바 그 결과(結果)을 요약(要約)하면 다음과 같다. 산지붕괴발생면적(山地崩壞發生面積)에 영향(影響)을 주는 인자(因子)는 강우(降雨), 령급(齡級), 표고(標高), 토성(土性), 경사(傾斜), 사면위치(斜面位置), 임상(林相), 곡차수(谷次數), 종단사면형(縱斷斜面形), 모암(母岩), 토심(土深), 방위(方位)의 순(順)이었으며, 편상관계수(偏相關係數)에 의(依)한 인자(因子)는 령급(令級), 강우(降雨), 토성(土性), 모암(母岩), 경사(傾斜), 사면위치(斜面位置), 표고(標高), 종단사면형(縱斷斜面形), 곡차수(谷次數), 임상(林相), 토심(土深), 방위(方位)의 순(順)으로 나타났다. 또한 산지붕괴발생빈도(山地崩壞發生頻度)에 의(依)한 인자(因子)의 순위(順位)는 령급(令級), 표고(標高), 토성(土性), 경사도(傾斜度), 식생(植生), 강우(降雨), 종단사면(縱斷斜面), 곡차수(谷次數), 모암(母岩), 토심(土深)이었으며 사면위치(斜面位置) 및 방위(方位)는 기여도(寄與度)가 낮게 나타났다. 산지사면붕괴위험(山地斜面崩壞危險) 예지(豫知)를 위(爲)하여 붕괴발생면적(崩壞發生面積)에 의(依)한 예측(豫測)모델에서 위험도(危險度) 예측점수표(豫測點數表)를 작성(作成)할 수 있었으며, 점수합계(點數合計)가 9.1636이면 붕괴발생위험(崩壞發生危險)이 높은 것으로 평가(評價)되었으며 산지(山地) 사면붕괴(斜面崩壞)가 발생(發生)한 사면(斜面)과 발생(發生)하지 않은 사면(斜面)에 의(依)한 예측(豫測)모델에서 우사면(雨斜面)에 대(對)한 사면판별(斜面判別) 구분치(區分値)는 -0.02였고, 그 적중율(適中率)은 73%로 높았다. 또한 판별구분치(判別區分値)를 기준(基準)으로 한 산지사면붕괴발생(山地斜面崩壞發生) 위험도별(危險度別) 점수(點數)는 A급(級)은 0.3132 이상(以上)이었고, B급(級)은 0.3132~-0.1051, C급(級)은 -0.1050~-0.4195, D급(級)은 -0.4195 이하(以下)였다. 그리고 산지사면붕괴발생(山地斜面崩壞發生)의 예지(豫知)는 판별구분치(判別區分値)를 기준(基準)으로 위험도(危險度)을 A, B, C, D의 4등급(等級)으로 구분(區分)할 수 있었으며, 총(總) 300개(個) 사면(斜面) 중(中) A급사면(級斜面) 68개(個), B급사면(級斜面) 115개(個), C급사면(級斜面) 65개, D급사면(級斜面) 52개(個)였다. 위험도(危險度) A, B급(級)에서의 산사태발생(山沙汰發生)은 150개(個) 붕괴지(崩壞地) 중 125개(個)로서 약(約) 83.3%의 높은 적중율(適中率)을 보여 예측(豫測)모델로서 응용(應用) 가능성(可能性)이 높게 나타났다. 따라서 이러한 예지방법(豫知方法)에 의(依)하여 선정(選定)한 위험(危險)한 지역(地域)에 대(對)하여 산지재해위험도(山地災害危險度) 지도(地圖)를 작성(作成)하여 토지이용(土地利用) 계획(計劃) 및 재해위험지(災害危險地) 선정기준(選定基準)의 행정지표(行政指標)로서 활용(活用)할 수 있을 것이다. 또한 산지재해(山地災害)에 대(對)한 종합(綜合) 대책(對策)에 유용(有用)하게 활용(活用)함으로써 막대(莫大)한 재산(財産) 피해(被害)와 인명(人命) 손실(損失)을 사전(事前)에 방지(防止)할 수 있을 것이다.

  • PDF

조선시대 왕릉의 공간적 분포특성 - 위성영상분석과 지질.지형분석의 방법으로 - (Spatial Characteristics of Royal Tombs of Chosun Dynasty - With Satellite Imagery and Geological-Geomorphological Analysis -)

  • 장은미;박경
    • Spatial Information Research
    • /
    • 제14권3호
    • /
    • pp.285-297
    • /
    • 2006
  • 본 연구는 지라정보시스템과 원격탐사자료를 이용한 거시적 관찰과 현지답사를 통해 조선시대의 왕릉 분포지에 대해 형태적 특성과 외부 환경적 특성을 분석한 것이다. 조선시대 왕릉은 주로 호상편마암과 화강암 지질에 위치하며, 봉분은 남사면과 동사면에 주로 위치한다. 해발고도는 150미터에서 200미터 사이에 분포한다. 논리적인 풍수이론을 검증한 결과라기 보단 위성영상에 나타날 왕릉을 분석하여 현재 시점에서 입지를 관찰하게 되어 정확한 입지 요인을 도출하기는 한계가 있었다. 배산임수의 임(臨)이 얼마나 가까워야 하는지를 수량화 하는 것 자체가 매우 어려운 작업이고 지리정보분석의 결과로 평균 600미터 정도 떨어져 있는 하천은 의미가 없을 수 있다. 또한 광릉의 경우에서 보듯 상세한 지형지물의 관찰의 결과 왕릉은 인위적 훼손과 자연적 풍화와 침식에 오랫동안 노출되고 있었다. 사면분석과 경사분석 등의 지리정보 분석과 더불어 야외조사를 통해 지형형성과정을 관찰한 내용은 왕릉의 관리와 복원에 사용될 것이다.

  • PDF

산불의 공간적 확산이 농촌지역경제에 미치는 영향 분석 (Analysis of Agricultural Regional Economic Effect by Spatial Dispersal of Wildfire in Korea)

  • 권영현;김의준
    • 농촌계획
    • /
    • 제20권3호
    • /
    • pp.67-74
    • /
    • 2014
  • The purpose of this study is to estimate regional economic effects of spatial diffusion of wildfire using Cobb-Douglas production function of agriculture and forestry. The analysis is applied to Gangwon and Gyeongbuk provinces where are the most damaged of wildfire in Korea. The damaged areas are derived from multiplied by the occurrence probability of wildfire and diffusion areas of wildfire for micro-spatial unit level with ArcGIS techniques. The models of wildfire provides that the spatial diffusion of wildfire increases with the rising of highest temperature and average wind speed. Through the production function, value added of Agriculture and Forest sectors get damaged where the Cos-converted slope aspect of mountains are toward the South. The production model provides reductions of regional value added by increasing damaged areas of wildfire. It reveals that the most damaged region is Andong city in Gyeongbuk province, where value added loss is 1.25 billion Won, which is about 0.72% of total value added in agriculture and forestry of the city. As a view of policy makers, it needs to be considered to establish prevention policies against wildfires because regional economic losses from wildfire are depending on geographical conditions and performances of the major industry related to wildfire's diffusion such as agriculture or tourism sector according to the result of analysis.

영양군 삼지지구 농촌테마공원 발전계획 (Development Plan of the Rural Experience Theme Park in Samji Area, Youngyanggun)

  • 민흥기;백승석;송이;리신호
    • 농촌계획
    • /
    • 제18권4호
    • /
    • pp.171-180
    • /
    • 2012
  • This study promotes the improvement of local incomes and rural activation by establishing rural experience theme park plans using local resources of Samzi district, Yeongyang-gun. The spatial scope of the study is the whole district of Samzi 1-ri, Yeongyang-eup, Yeongyang-gun, Gyeongsangbuk-do, the destination area is $129.927m^2$. The scope of the contents was to investigate general status of the site and was conducted as a basic plan, a basic planning stage through analysis of terrain and topography, slope analysis, aspect, SWOT analysis. The satisfaction of the customers to experience is increased, activation of rural exchange and income-generating infrastructure can be expected by creations the space of rural experience theme park. Themes are selected systematically and variety of the programs and spatial planning will be analyzed to promote more efficient business.

Transferring Calibrations Between on Farm Whole Grain NIR Analysers

  • Clancy, Phillip J.
    • 한국근적외분광분석학회:학술대회논문집
    • /
    • 한국근적외분광분석학회 2001년도 NIR-2001
    • /
    • pp.1210-1210
    • /
    • 2001
  • On farm analysis of protein, moisture and oil in cereals and oil seeds is quickly being adopted by Australian farmers. The benefits of being able to measure protein and oil in grains and oil seeds are several : $\square$ Optimize crop payments $\square$ Monitor effects of fertilization $\square$ Blend on farm to meet market requirements $\square$ Off farm marketing - sell crop with load by load analysis However farmers are not NIR spectroscopists and the process of calibrating instruments has to the duty of the supplier. With the potential number of On Farm analyser being in the thousands, then the task of calibrating each instrument would be impossible, let alone the problems encountered with updating calibrations from season to season. As such, NIR technology Australia has developed a mechanism for \ulcorner\ulcorner\ulcorner their range of Cropscan 2000G NIR analysers so that a single calibration can be transferred from the master instrument to every slave instrument. Whole grain analysis has been developed over the last 10 years using Near Infrared Transmission through a sample of grain with a pathlength varying from 5-30mm. A continuous spectrum from 800-1100nm is the optimal wavelength coverage fro these applications and a grating based spectrophotometer has proven to provide the best means of producing this spectrum. The most important aspect of standardizing NIB instruments is to duplicate the spectral information. The task is to align spectrum from the slave instruments to the master instrument in terms of wavelength positioning and then to adjust the spectral response at each wavelength in order that the slave instruments mimic the master instrument. The Cropscan 2000G and 2000B Whole Grain Analyser use flat field spectrographs to produce a spectrum from 720-1100nm and a silicon photodiode array detector to collect the spectrum at approximately 10nm intervals. The concave holographic gratings used in the flat field spectrographs are produced by a process of photo lithography. As such each grating is an exact replica of the original. To align wavelengths in these instruments, NIR wheat sample scanned on the master and the slave instruments provides three check points in the spectrum to make a more exact alignment. Once the wavelengths are matched then many samples of wheat, approximately 10, exhibiting absorbances from 2 to 4.5 Abu, are scanned on the master and then on each slave. Using a simple linear regression technique, a slope and bias adjustment is made for each pixel of the detector. This process corrects the spectral response at each wavelength so that the slave instruments produce the same spectra as the master instrument. It is important to use as broad a range of absorbances in the samples so that a good slope and bias estimate can be calculated. These Slope and Bias (S'||'&'||'B) factors are then downloaded into the slave instruments. Calibrations developed on the master instrument can then be downloaded onto the slave instruments and perform similarly to the master instrument. The data shown in this paper illustrates the process of calculating these S'||'&'||'B factors and the transfer of calibrations for wheat, barley and sorghum between several instruments.

  • PDF