• 한국지반공학회지:지반
• /
• 제6권3호
• /
• pp.13-30
• /
• 1990

본 연구에서는 깊은 기초의 내진설계에 적용하기 위해, 지진하중에 의한 말뚝기초의 응답을 산출하여 비교, 검토하였다. 본 연구에서 사용된 해석 방법은 Subgrade Reaction Theory 및 탄성해석법과 같은 유사정적 해석방법, Prakash및 Gazetas가 각각 제안한 동적 해석방법이며, 예제해석을 통해 말뚝의 최대 상대변위 및 최대 휨모멘트를 위의 각 방법을 이용해서 산출하였고, 그 결과를 각각 비교하였다. 또한 말뚝의 군효과를 근사적으로 고려하여 Novak에 의해 수행된 실험 결과와 비교하였다. 해석결과를 분석해 볼 때 Kaynia와 Kausel이 제안한 동적 Group Interaction Factor Approach 에 의한 땅법 및 Gazetas가 제안한 방법의 최대 상대변위는 실측치와 부합하게 산정되었으며, Prakash 가 제안한 방법과 정적 Group Interaction Factor Approach에 의한 변위 및 휨모멘트는 과대평가되었다. 그러므로, 말뚝의 내진설계시에 동적 Group Interaction Factor Approach와 결합한 유사정적해석 을 사용하고 Gazetas가 제안한 동적방법에 의해 이를 검토하는 것이 바람직하다.

• Structural Engineering and Mechanics
• /
• 제61권3호
• /
• pp.419-426
• /
• 2017

Recently, the transportation of dangerous explosive goods is increasing, which makes vehicle blasting accidents a potential threat for the safety of bridge structures. In addition, blasting accidents happen more easily when earthquake occurs. Excessive dynamic response of bridges under extreme loads may cause local member damage, serviceability issues, or even failure of the whole structure. In this paper, a new explosion-proof and aseismic system is proposed including cable support damping bearing and steel-fiber reinforced concrete based on the existing researches. Then, considering one 40m-span simply supported concrete T-bridge as the prototype, through scale model test and numerical simulation, the dynamic response of the bridge under three conditions including only earthquake, only blast load and the combination of the two extreme loads is obtained and the applicability of this explosion-proof and aseismic system is explored. Results of the study show that this explosion-proof and aseismic system has good adaptability to seism and blast load at different level. The reducing vibration isolation efficiency of cable support damping bearing is pretty high. Increasing cables does not affect the good shock-absorption performance of the original bearing. The new system is good at shock absorption and displacement limitation. It works well in reducing the vertical dynamic response of beam body, and could limit the relative displacement between main girder and capping beam in different orientation so as to solve the problem of beam falling. The study also shows that the enhancement of steel fibers in concrete could significantly improve the blast resistance of main beam. Results of this paper can be used in the process of antiknock design, and provide strong theoretical basis for comprehensive protection and support of girder bridges.

• 한국지반환경공학회 논문집
• /
• 제7권6호
• /
• pp.89-100
• /
• 2006

최근 지진에 대해서 상대적으로 안전하다고 생각되던 지역 및 나라에서 비교적 큰 규모의 지진이 발생하여 수많은 인명 및 재산피해를 발생시키고 있으며, 국내에서 발생되는 지진의 횟수도 급증하고 있는 것으로 보고되어지고 있다. 이러한 이유로 최근의 건설공사는 대형 구조물뿐만 아니라 비교적 규모가 작은 저수지 댐까지 체계적인 내진설계를 거쳐 지진에 대하여 안정성을 확보하도록 계획하고 있는 실정이다. 따라서 본 연구에서는 국내에서 신설되는 주요 저수지 댐에 대하여 지진에 대한 안정성 확보 여부를 확인하고자 내진성능 평가를 수행하였다. 신설되는 저수지 댐에 대하여 단주기파, 장주기파 및 인공지진파로 SHAKE 프로그램을 이용한 지진응답해석을 시행하였으며, 그 결과를 활용해 저수지 댐의 지반 액상화에 대한 안정해석을 시행하였다(액상화 간편예측법). 또한 가능한 실제 지반의 거동과 유사하게 수치해석을 모사하기 위해서 간극수압-지반 상호작용을 고려하는 완전연계해석(Fully Coupled Analysis)을 수행하여 과잉간극수압변화와 지반 동적 변형특성을 검토하였다.

• 한국디지털건축인테리어학회논문집
• /
• 제2권1호
• /
• pp.45-51
• /
• 2002

The masonry structure has been widely used as the dwelling house structure in our country for a long time. The masonry structure is weak in the lateral forces such as strong wind and earthquake. But there is no regulation for it in the domestic aseismic design codes. The purpose of this study is to suggest a simple design method of un-reinforced masonry wall.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1991년도 봄 학술발표회 논문집
• /
• pp.61-67
• /
• 1991

Conventional aseismic design methods of reinforced concrete frame all but disregard the state of damage over the entire building frame. This paper presents an automated damage-contorlled design method, which aims for uniform damage distribution throughout the entire building frame, as measured by the individual mumber damage indexes. Three design parameters, namely the longitudinal steel ratio, the confinement steel ratio and the frame member depth, were studied for their influence on the frame responce to an earthquake. The usefulness of this design method is demonstrated with a four story example office building predicting the extent of structural damage.

• Smart Structures and Systems
• /
• 제26권1호
• /
• pp.89-102
• /
• 2020

Shape memory alloy (SMA)-based Superelasticity-assisted Slider (SSS) is proposed as an engineering solution to practically exploit the well-accepted advantages of both sliding isolation and SMA-based recentering. Self-centering capability in SSS is provided by austenitic SMA cables (or wire ropes), recently attracting a lot of interest and attention in earthquake engineering and seismic isolation. The cables are arranged in various novel and conventional configurations to make SSS versatile for aseismic design and retrofit of structures. All the configurations are detailed with thorough technical drawings. It is shown that SSS is applicable without the need for Isolation Units (IUs). IUs, at the same time, are devised for industrialized applications. The proof-of-concept study is carried out through the examination of mechanical behavior in all the alternative configurations. Force-displacement relations are determined. Isolation capabilities are predicted based on the decreases in seismic demands, estimated by the increases in effective periods and equivalent damping ratios. Restoring forces normalized relative to resisting forces are assessed as the criteria for self-centering capabilities. Lengths of SMA cables required in each configuration are calculated to assess the cost and practicality. Practical implementation is realized by setting up a small-scale IU. The effectiveness of SSS under seismic actions is evaluated using an innovative computer model and compared to those of well-known Isolation Systems (ISs) protecting a reference building. Comparisons show that SSS seems to be an effective IS and suitable for earthquake protection of both structural and non-structural elements. Further research aimed at additional validation of the system are outlined.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2000년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall 2000
• /
• pp.261-266
• /
• 2000

This paper consider the effects of the human-body stiffness on the response of the footbridge to ground shaking by an earthquake. A mass-spring, suggested by Tianjian Ji(1999), describing the stiffness of the human body and an inert mass specified in the Code as the appropriate human whole-body model are used and the responses of the structure in both cases to ground shaking are were compared. Finally this paper ascertains whether the consideration of the human body as a mass is safe in the aseismic design.

• Structural Engineering and Mechanics
• /
• 제9권2호
• /
• pp.141-152
• /
• 2000

Based on the discussion about some empirical coherency models resulted from earthquake-induced ground motion recordings at the SMART-1 array in Taiwan, and a heuristic model of the coherency function from elementary notions of stationary random process theory and a few simplifying assumptions regarding the propagation of seismic waves, a practical coherency model for spatially varying ground motions, which can be applied in aseismic analysis and design, is proposed, and the regressive coefficients are obtained using least-square fitting technique from the above recordings.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1997년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall 1997
• /
• pp.201-208
• /
• 1997

In most seismic codes such as the Uniform Building Code(UBC), the response modification factor(or the force reduction factor)is used to reflect the capability of a structure in dissipating energy through inelastic behavior. The response modification factor is assigned according to structural system type. Ductile systems such as special moment-resisting steel frames are assigned larger values of the response modification factor, and are consequently designed for smaller seismic design forces. Therefore, structural damage may occur during a severe earthquake. To ensure safety of the structures, the suitability of the response modification factor used in aseismic design procedures shall be evaluated. The object of this study is to develop a method for the evaluating of the response modification factor. The validity of the evaluating method has been examined for several cases of different structures and different earthquake excitations.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2000년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Spring
• /
• pp.3-16
• /
• 2000

The ultimate safety-goal of nuclear power plants should be targeted at preventing release of nuclear radiation compared to general structures, Accordingly the phases of siting design construction and operation of NPPs are severely regulated by codes of aseismic design so as to assure safety of NPPs. To accomplish this goal strict quality assurace and seismic qualification tests should be conducted for all phases of NPP construction. In addition seismic monitoring systems should be installed and always in operation to provide proper post-earhquake procedures. Besides periodic safety review should be performed during operation along with the seismic margin assessment. In this paper general procedures to secure seismic safety of NPPs are systematically reviewed and additional considerations for improvement are suggested.