• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.18 no.8
• /
• pp.649-655
• /
• 2006

The recent indoor air quality problem in a newly-built apartment house is resulted from the improvement of airtightness performance and the use of the building material contained harmful chemical substances. As a result, these cause indoor air quality gradually to become worse and the harmful effect on occupant health called Sick House Syndrome. The most effective solution to improve the indoor air quality is to encourage the use of green building material. However, if the house is built with general building material, ventilation with outdoor air is alternative to dilute the pollutant concentration. The purpose of this re-search is to find optimum ventilation time in a newly-built apartment house at which the ventilatoris installed. It is found that the HCHO and toluene concentrations are remarkably decreased with the elapse of ventilation time and the concentration reduction rate is increased with increment of air change rate after one hour after operating the ventilator.

• Journal of the Korean housing association
• /
• v.16 no.4
• /
• pp.101-108
• /
• 2005

Because of the airtightness of building, misuse of building materials and abuse of furniture, indoor air pollution problems have been increasingly concerned especially with apartment buildings. To improve the IAQ(Indoor Air Quality) in apartment building, this study was aimed at analyzing the factor of interior building material and furniture and calculating the ventilation rate of living room and bed room according to the surface area of interior building material and furniture in terms of VOCs(Volatile Organic Compounds) and HCHO(Formaldehyde). The results of this study are as follows; 1) In the concerned rooms, the living room has less pollution emission rate L(surface area/volume) than that of the bed room but, the living room needs more ventilation rate than that of the bed room because of built-in furniture in terms of VOCs and HCHO. 2) Built-in interior furniture is very important factor in IAQ problems of apartment building, but until now there is no provision about the built-in furniture, so that the provision must be regulated to control the IAQ. 3) To control the IAQ problem, the effective ventilation plans must be established according to the required ventilation rate by means of natural or mechanical ventilation method.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.4
• /
• pp.115-126
• /
• 2019

Construction of the Pyongyang Railroad Station began in 1907 as an important foothold for the Japanese colonization of the Korean Peninsula and the further invasion of Manchuria. As Pyongyang gradually grew in size and political significance, the Pyongyang Station came to have two responsibilities: Fulfill its functional role and serve as a monument to the growing dignity of the city. This study argues that the Pyongyang Station, newly rebuilt in 1958, was the first building to solve the demands for both functional expansion and the pursuit of monumentality. Stylistically, the original single-story wooden building became a three-story classical masonry building. The stylistic change symbolizes the political shift by which the building was reconstructed. The simple wooden building built by the Japanese, representing Pyongyang's status as a colonial provincial town, was transformed into an imposing gateway for the capital city of a newly born socialist state. Socialist Realism, correctly described by its slogan "socialist in content and national in form," harmoniously blended classical architecture, socialist symbols, and Korean local motifs. This study is significant in that it illustrates the historical changes and continuity of the Pyongyang Station from 1907, when it was first built, through the "liberated space" to the postwar reconstruction period of the 1950s.

• KIEAE Journal
• /
• v.16 no.2
• /
• pp.5-10
• /
• 2016

Purpose: Recently, many public office buildings which were built by curtain wall increased rapidly, but the results of the investigation of the government, these buildings have been found that the heating and cooling thermal load is high, and showed low energy efficiency. Method: To evaluate the effects by applying outdoor louver and indoor blind, which can control solar radiation in order to reduce the heating and cooling load of public office building which was built by glass curtain wall. The heating and cooling load was calculated via Energyplus, building and outdoor louver, indoor blind were modeled by Google sketchup connected to Energyplus. Result: The results of this study were as follows; the case of applying various outdoor louver, the heating and cooling load all decreased as compared to the case without applying outdoor louver, the case of applying indoor blind, the heating and cooling load decreased as compared to the case without applying indoor blind, but indoor blind showed low energy performance comparing outdoor louver.

• Structural Engineering and Mechanics
• /
• v.45 no.3
• /
• pp.311-321
• /
• 2013

In this study, to have a better judgment on the structural performance, the effects of dynamic Soil-Structure Interaction (SSI) on seismic behaviour and lateral structural response of mid-rise moment resisting building frames are studied using Finite Difference Method. Three types of mid-rise structures, including 5, 10, and 15 storey buildings are selected in conjunction with three soil types with the shear wave velocities less than 600m/s, representing soil classes $C_e$, $D_e$ and $E_e$, according to Australian Standard AS 1170.4. The above mentioned frames have been analysed under two different boundary conditions: (i) fixed-base (no soil-structure interaction), and (ii) flexible-base (considering soil-structure interaction). The results of the analyses in terms of structural lateral displacements and drifts for the above mentioned boundary conditions have been compared and discussed. It is concluded that the dynamic soil-structure interaction plays a considerable role in seismic behaviour of mid-rise building frames including substantial increase in the lateral deflections and inter-storey drifts and changing the performance level of the structures from life safe to near collapse or total collapse. Thus, considering soil-structure interaction effects in the seismic design of mid-rise moment resisting building frames, particularly when resting on soft soil deposit, is essential.

• International Journal of High-Rise Buildings
• /
• v.11 no.1
• /
• pp.1-14
• /
• 2022

Debates on what is the first skyscraper have been ongoing from time to time since the construction of the Home Insurance Building in Chicago in 1885, which is generally recognized as the first built skyscraper. This paper attempts to verify this assertion through a detailed investigation after identifying the criteria that characterize a skyscraper. By considering and examining several competing buildings for the title of "first skyscraper" in terms of their levels of satisfying these criteria, the paper reconfirms that the Home Insurance Building in Chicago indeed qualifies as the first skyscraper and is the harbinger of future skyscrapers. By introducing technological and associated architectural innovations in this pioneering building, its designer William Le Baron Jenney paved the way for the construction of future skyscrapers. In traditional construction, heavy masonry walls especially at lower levels did not allow large window openings in exterior walls that would permit ample daylight. For the Home Insurance Building, originally built with 10 stories, Jenney created a metal-framed skeletal structure that carried the building's loads, making the building lighter and allowed for large windows permitting ample natural light to the building's interior. The exterior iron columns were encased in relatively small masonry piers mainly for fireproofing, weather-protection and façade aesthetics. Relying on the structural framing on the building's perimeter, the exterior masonry thus turned into a rudimentary "curtain wall" system, heralding the use of curtain wall construction in future skyscrapers. This building's innovative structural system led to what is known as the "Chicago Skeleton," and eventually produced remarkable skyscrapers all over the world.

• Journal of architectural history
• /
• v.8 no.2 s.19
• /
• pp.9-32
• /
• 1999

In order to reveal the source of the architectural norm embodied in the first built-form of ChongMyo's Main Building, three analytic types were introduced into research. According to the level of accepting the architectural form of ChongMyo in the Koryo Dynasty, these types were defined by 'newly interpreted form', 'newly introduced form', and 'coventionally accepted form'. Among the first built-form in ChongMyo's Main Building, the form of 'TaeSil' was newly interpreted on the basis of the Tang's realating norm, and the form of 'HyupSil' was newly introduced according to the contemporary trend that had increasingly regarded it as an indispensible form. But the form of 'IkSil' had the different source, that is, the architectural form of ChongMyo in the Koryo Dynasty. After reconstructed by the King ChungSun, that form had been sustained without any change until the end of Koryo Dynasty. In result, that form had been accepted conventionally at the first time of building ChongMyo in the ChoSon dynasty.

• Journal of architectural history
• /
• v.28 no.2
• /
• pp.19-30
• /
• 2019

The former administration office building of Kyeong-seong-bu(京城府) was a building converted from the Japanese residency-general's of Kyeong-seong(京城理事廳) which was originally built as the Japanese consulate in Joseon(日本領事館). It was too worn and too small as a Kyeong-seong-bu administration office even with several annexes. Kyeong-seong-bu tried to build a new big administration office building at the vacant north side of the same site, which was closely faced to the rotary in front of the Bank of Joseon(朝鮮銀行前廣場). But this trial was ended in vain due to insufficient budget. Therefore Kyeong-seong-bu built a new administration office building in another site and moved to it in 1926 with debts. For paying for the debts Kyeong-seong-bu sold the former site after partitioning with new roads through it. As a result the nature of the former site and its surroundings was changed. This study traces the changes and inquires how the authorities in the colonial Joseon and various commercial powers of Kyeong-seong-bu behaved for their own interests in the meantime. It makes use of the historical records and documentary literatures between early 1910s and early 1930s.

• Journal of the Korean Solar Energy Society
• /
• v.40 no.3
• /
• pp.21-31
• /
• 2020

The government mandates gradually zero energy building and Photovoltaic power generation systems installed in buildings are emerging as the most realistic alternative to increase the independence rate of building energy. In this study, we propose a method to reduce the power consumption of households by increasing the PV capacity of balconies and applying the method used the charged electric power stored in batteries after sunset. In order to evaluate the electric power energy savings of the residential BESS, a balcony PV 1.2 kW and a battery pack 2 kWh were installed for 9 houses in 4 apartments in Seoul and Gyeonggi-do. The BESS is charged when the balcony PV is generated electric power, and when solar power generation is finished, it supplies power to the electric appliances connected to the load. As a result of installing the solar PV module 1.2 kW and 2 kWh class BESS for 3 households located in Seoul and Gyeonggi-do, the average electric power consumption saving rate was 40%. The reduction in electricity consumption in the case of zero generation surplus power by maximizing the utilization rate of BESS has been improved to about 53%. Therefore, in order to increase the self-sufficiency rate of electric energy in apartment houses, it is effective to increase the solar photovoltaic capacity of the balcony and apply the residential BESS. In the future, it is believed that the balcony PV and home BESS will play a key role in achieving mandatory zero-energy housing.

• Journal of architectural history
• /
• v.20 no.5
• /
• pp.47-61
• /
• 2011

This study examined the background and change of building Yeongam eupseong and characteristics and construction method of its spatial structure. The results of this study can be summarized as follows. First, Yeongam eupseong was built for the same purpose of national border defense against the invasion of Japanese army as other Eupseongs were built and it was found first in the literature in the era of King Munjong of Joseon Dynasty with the scale of three gates and 4,369 cheok of castle wall. Such a scale was continued and in particular, according to flat structure, road network and gate position shown in the map, the form and road system of Yeongam eupseong before the 19th century were mostly identical with the current ones. Second, castle wall was built over foundation by using talcum after leveling the foundation soil and castle wall can be divided into outer wall, filling part and inner wall from the section. Outer wall was constructed by inserting and layering pebbles with big irregular stone, filling part was made with talcum and riprap and inner wall with soil in several layers by keeping gradient. This building method showed common features in inserting and layering pebbles for outer wall, use of protruded base and section form compared to Jeollado Eupseong.