• 환경생물
• /
• 제21권2호
• /
• pp.181-188
• /
• 2003

In this study, soil seed and bud bank analysis were performed to abbess the mass of potential vegetation in soils less than 1 year old after covered and estimate the amount of seed bank transport through construction in urban area. The ratio of exotic species number to total species number in study sites and the landfill control site was 0.29 and 0.39, respectively. All plots pooled, mean species number and total mean seedling density per $\m^2$ in the top 10 cm of soil was 11$\pm$0 (average$\pm$S.E.) and 8037$\pm$221.Total plant seeds by artificial soil trasnsfer were estimated to be 53 thousand million $m^{-2}yr^{-1}$ in 10 cm soil depth. It reveals that soil transfer accelerates seeds and vegetation movement and makes urban vegetation mixed and common.

• 한국지반신소재학회논문집
• /
• 제10권2호
• /
• pp.29-34
• /
• 2011

본 연구에서는 유류나 각종 비수용성 오염물질(DNAPL)로 오염된 지반에 인공동결공법을 이용한 차수벽을 형성하고 지하수의 이동으로 인한 오염물질의 확산 방지 효과를 확인하기 위한 초기연구로 인공동결공법을 통한 동결차수벽을 형성하기 위하여 모형실험을 수행하였다. 동결차수벽 형성의 확인을 위하여 실험조건에 따른 동결범위와 동결토의 강도를 분석하였다. 동결범위를 확인하기 위한 실험조건은 포화도가 80%, 90%인 표현을 실트를 대상으로 하였다. 또한, 동결토의 강도특성은 다짐도와 포화도를 변경하여 동결을 실시하였고, 일축압축강도 실험을 통하여 확인하였다.

• 한국재난정보학회 논문집
• /
• 제3권2호
• /
• pp.147-169
• /
• 2007

This study investigates the reinforcing effects of the Multi-bar Spring nails with respect to the conventional Soil-nails in artificial slopes. Based on wide experience related to design and construction, soil nails have been widely applied to reinforce slope in the world. Multi-bar spring nails are one of the improved soil nailing methods. These method maximizes bending, shearing, pull-out resistance for those multi-nails, not unit nail, that are inserted in the borehole using special spacer at regular intervals. In addition, because cutting plane is confined effect resulting from a pressured plate at the end of the nails with compression spring equipment, slope stability is secured using MS-nailing method. Analyzing bending, pull-out, shearing condition of MS-nail, it was examined throughly elastic region, load transfer capacity, reinforcing effect on cutting plate of MS-nails. In addition, Pilot and laboratory tests, numerical analysis were carried out to verify the superiority of MS-nailing method. In case, MS nailing method is applied to reinforce artificial slope, it was analyzed that bending, pull-out, shearing resistance was increased more than existing nailing method was applied. In this study, it was shown that surface failure was more or less prevented using MS-nailing method, confining effect on cutting plane using spring stuck to flexible equipment.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제19권3호
• /
• pp.123-133
• /
• 2014

It is important to predict the groundwater level fluctuation for effective management of groundwater monitoring system and groundwater resources. In the present study, three different time series models for the prediction of groundwater level in response to rainfall were built, those are transfer function noise model (TFNM), artificial neural network (ANN), and adaptive neuro fuzzy interference system (ANFIS). The models were applied to time series data of Boen, Cheolsan, and Hongcheon stations in National Groundwater Monitoring Network. The result shows that the model performance of ANN and ANFIS was higher than that of TFNM for the present case study. As lead time increased, prediction accuracy decreased with underestimation of peak values. The performance of the three models at Boen station was worst especially for TFNM, where the correlation between rainfall and groundwater data was lowest and the groundwater extraction is expected on account of agricultural activities. The sensitivity analysis for the input structure showed that ANFIS was most sensitive to input data combinations. It is expected that the time series model approach and results of the present study are meaningful and useful for the effective management of monitoring stations and groundwater resources.

• 식물조직배양학회지
• /
• 제21권4호
• /
• pp.233-237
• /
• 1994

용담의 잎 절편 배양을 통하여 유도된 배발생 캘러스로 부터 식물체의 재분화 체계를 확립하였다. 캘러스는 0.5 mg/L2,4-D, 2 mg/L BAP가 첨가된 MS 배지에서 유도되었으며, 이 캘러스를 2 mg/L P-CPA, 0.5 mg/L 2,4-D 및 0.5mg/L kinetin이 첨가된 SH 배지에 옮겼을 때 배발생 캘러스의 유도가 가능하였다. 배발생 캘러스는 SH 기본 배지에 옮겨 슈트의 증식 및 뿌리 발생을 유도하였다. 재분화 식물체는 피트모스, 펄라이트, 버미클라이트가 2:1:1의 비율로 혼합된 인공 토양에서 순화시킨 후 토양에 활착시켰다. 토양에 활착된 재분화 식물체는 키, 줄기의 모양과 수, 개화기등에서 표현형적 변이를 나타냈다. 세포유전적 분석에서 모식물체와 재분화 식물체의 염색체는 2n=26으로 안정성을 보였는데, 이는 본 연구에서 적용된 재분화 체계가 안정하다는 것을 시사한다.

• Geomechanics and Engineering
• /
• 제6권4호
• /
• pp.359-376
• /
• 2014

Thermal conductivity of ground has a great influence on the performance of Ground Heat Exchangers (GHEs). In general, the ground thermal conductivity significantly depends on the density (or porosity) and the moisture content since they are decisive factors that determine the interface area between soil particles which is available for heat transfer. In this study, a large number of thermal conductivity experiments were conducted for soils of varying porosity and moisture content, and a database of thermal properties for the weathered granite soils was set up. Based on the database, a 3D Curved Surface Model and an Artificial Neural Network Model (ANNM) were proposed for estimating the thermal conductivity. The new models were validated by comparing predictions by the models with new thermal conductivity data, which had not been used in developing the models. As for the 3D CSM, the normalized average values of training and test data were 1.079 and 1.061 with variations of 0.158 and 0.148, respectively. The predictions became somewhat unreliable in a low range of thermal conductivity values in considering the distribution pattern. As for the ANNM, the 'Logsig-Tansig' transfer function combination with nine neurons gave the most accurate estimates. The normalized average values of training data and test data were 1.006 and 0.954 with variations of 0.026 and 0.098, respectively. It can be concluded that the ANNM gives much better results than the 3D CSM.

• 한국터널지하공간학회 논문집
• /
• 제18권5호
• /
• pp.401-412
• /
• 2016

고수압 조건의 해저터널 공사에 기존의 그라우팅 공법은 제한을 받게 되어 굴착작업이 어려울 수 있으나, 인공동결공법을 적용할 경우 신속한 차수 및 지반보강 효과를 얻을 수 있다. 인공동결공법을 적용할 경우, 동결 조건에 따라 동결토의 거동이 크게 변화하므로 기존의 연구 사례를 바탕으로 해저지반 등 특수한 조건에서 동결토의 역학적 거동을 예측하는 것에는 한계가 있다. 또한, 인공동결공법의 설계를 위해서는 동결체 형성에 필요한 소요시간 및 동결범위를 산정해야 하며, 해저지반의 경우 간극수 내 염분의 영향을 반영해야 한다. 본 논문에서는 동결토의 열적 특성을 파악하기 위해 인조규사 시료에 대한 실내 열전도도 측정시험과 동결챔버시험을 수행하였다. 동결토와 비동결 포화토 간극수의 염도를 조절하여 동결 과정과 염분에 따른 유효 열전도도를 비정상 열선법을 적용하여 측정하였다. 인조규사 간극수의 염도에 의한 동결특성 변화를 파악하기 위해 동결챔버를 설계 및 제작하였고 이를 통하여 동결 조건을 변화시키며 동결챔버시험을 수행하였다. 동결 조건에 따른 시료내 온도 변화를 분석하고 이를 통해 동결 조건이 사질토의 열전달 특성에 미치는 영향을 평가하였다. 비동결 포화토의 경우는 간극수가 담수(염도 0%)인 조건과 염수(염도 3.5%)인 조건 모두 유효 열전도도가 유사하게 평가되었으나, 동결토의 경우는 간극수가 염수인 조건이 보다 큰 유효 열전도도를 보였다. 이는 동결챔버시험에서 간극수가 염수인 조건이 담수인 조건보다 동결속도가 더 빠른 결과와 일치한다.

• 한국방재안전학회논문집
• /
• 제7권2호
• /
• pp.1-8
• /
• 2014

급경사지 계측에 활용을 위하여 GNSS와 TRS센서를 주축으로 하여 전원, 통신 등의 부대설비, 그리고 변위 추출 및 가시화 등의 데이터처리 소프트웨어를 개발하여 스마트폴 계측시스템을 구축하였다. 본 연구에서 개발한 스마트폴 계측센서의 개념은 GNSS안테나 바로 밑에 TRS센서 및 자이로(gyro) 센서 등, 그리고 하단에 함수비센서를 장착하여 실시간으로 지표변위는 물론, 지반의 병진, 활동, 침하 등의 세가지 요인을 추출해 내고 함수비를 추출하여 전송할 수 있도록 하였다. 스마트폴 계측시스템은 데이터 수신부, 데이터 수집 및 전송부, 데이터 처리부로 구분하여 각 부분별 기능을 발휘할 수 있도록 구축한 다음, 현장적용성 평가를 위해 인위적 변위를 도입한 시험계측을 실시하고 그 결과를 분석하였다.

• Journal of Plant Biotechnology
• /
• 제30권3호
• /
• pp.269-273
• /
• 2003

In order to develop an efficient micropropagation protocal for Eucalyptus pellita, on in vitro culture system has been was established by inducing axillary buds from greenhouse stock materials. Among 6different media tested, DKW medium was the best ot induce bast induce both shoot proliferation and growth. Average number of proliferated shoots of 403per explant was obtained at the concentration of 0.1mg/LBA. Most of the stem materials excreted phenolic compounds at the proximal part of the explant and caused darking of the media. Therefore, it was necessary to transfer frequently to a fresh medium and/or to add activated charcoal at the concentration of 0.02％(w/v). Generally on vitro roots were formed easily on 1/2DKW medium with NAA treatment. All the explants rooted at the medium containing 0.2mg/L NAA and displayed vigorous root growth in vitro culture conditions. After transferred to an artificial soil mixture (peatmoss: vermiculrite: perlite, 1:1:1, v/v/v) in the greenhouse, most rooted plantlets survived well without any morphological abnormalities. The results show that the species can be micropropagated effectively by the application of axillary bud culture system.

• Plant Biotechnology Reports
• /
• 제3권3호
• /
• pp.251-257
• /
• 2009

Embryogenic callus was obtained from bulb segments of Iris pseudacorus on Murashige and Skoog (MS) medium with 2,4-dichlorophenoxyacetic acid (2,4-D) alone or in combination with kinetin. When early globular somatic embryos were subcultured onto MS medium with $4.52{\mu}M$ 2,4-D, high frequency of somatic embryogenesis was obtained. Deprivation of 2,4-D was required for maturation. Mature somatic embryos had an elongated scutellum with a notch on the base of scutellum. Separation of embryos from embryo clusters was necessary to enhance the frequency of germination. Germination was stimulated by separation of embryos from embryo clusters and transfer onto fresh half-strength MS medium with 3% sucrose. After acclimation in artificial soil in greenhouse for 2 months, 96.4% of plantlets survived.