• Journal of the korean academy of Pediatric Dentistry
• /
• v.50 no.4
• /
• pp.396-408
• /
• 2023

The purpose of this study was to compare the proximal surface contour, size of contact area, and volume difference before and after restoration in artificial teeth of primary molars during proximal composite resin restoration using different matrix systems. Four types of artificial teeth were restored with composite resin using sectional matrix systems-Palodent V3 Sectional Matrix System and myJunior Kitand a circumferential matrix system-Tofflemire Matrix System-and modeled threedimensionally for analysis. When sectional matrix systems were used, there was a higher probability of concave proximal surface contour and simultaneously greater contact area and volume. This is attributed to the dead soft properties of the matrix band used in sectional matrix systems, which can lead to deformation of the band and hence an excessive amount of resin applied around the contact point. Additionally, the rubber wedge in the sectional matrix system may not help the matrix band fit into the cavity. Therefore, based on the findings of this study, morphological aspects need to be carefully considered for proximal composite resin restoration of primary molars using sectional matrix systems.

• Journal of Advanced Navigation Technology
• /
• v.24 no.3
• /
• pp.224-231
• /
• 2020

An optical tracking plays an important role for measurement operation, as it is responsible for low altitude measurements that are difficult to obtain with radar systems. Since the existing optical tracking systems have not been developed in the proving ground itself so far, it is difficult to modify them to fit the environment of the proving ground. Also, they are designed as a vehicle-mounted type, so there is a limitation in selecting an optimal site. The in-house developed small optical tracking system is designed with a simple configuration to overcome these shortcomings and makes it possible for operators to operate the system at any place in the proving ground. In addition, there has been a need of developing small optical trackers by ourselves to be prepared for future research so that artificial intelligence (AI) can be applied to the optical tracking systems. In this paper, we described the design concept of the small optical tracker, the configuration of the components to implement the basic tracking function, and showed the results of the simulation to set the configuration of the equipment according to the characteristics of the flight targets.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.15 no.2
• /
• pp.43-56
• /
• 1987

The concept of ‘Open Space’ is conceived to be very valuable subject of interest in developing modern settlement system. In Korea, many new and old residential sites have been developed or renewed to fulfil the housing demands. And such trends seem to continue for the time being. What is more, the requirments for more comfortable residential environments, that is deeply concerned with ‘Open Space’, inorease gradually. As a basis for designing more efficent residential environments to fit Korean morden life style, self - grown, traditional and agricultural villages are studied. This study is concenturated on the Open Space System with its socio - cultural and physical backgrounds. For this, data and materials are some widely collected and are analysed focused on the systems and structures of ‘Open Spaee’. Some results from this study are summarized as follow ; 1. It is assumed that the number of houses per village is around 60, and that its area reaches to the radious of 3-4km. 2. ‘POONGSU’is a generally adopted theory based on natural elements like mountians, waters, and orientations when locating villages and composing their spatial structures. As a result of this, the basic structures of villages and Open Space are defined. 3. Circulation system is integrated to the hierachyal order system ; that is, Passing Road \longrightarrowEntry Road\longrightarrowCentral Read\longrightarrowDisperse and Access Road. 4. The natural and agricultural land uses are overlapped with diverse outdoor activities - religious services, play and recreation, relaxation, etc - without any physical modification. 5. At each villages, several artificial and spot - like green facilities are found. And distinctive functions, meanings, and locationalities are given to each of them. On that, they become a visual and psychological centers of each village. 6. In addition to its basic function of circulation, Central Road takes the sence of place for outdoor activities. Because of this charactor, it plays an important role of activating the village life and binding the various Open Space elements.

• Proceedings of the KOSOMBE Conference
• /
• v.1994 no.12
• /
• pp.71-74
• /
• 1994

In cementless total hip arthroplasty(THA), an initial stability of the femoral component is mandatory to achieve bony ingrowth and secondary long term fixation. Bone ingrowth depends strongly on relative micromotion and stress distributions at the interface. Primary stability of the femoral component can be obtained by minimizing the magnitude of relative micromotions at bone-prosthesis interface, Hence an accurate evaluation of interface behavior and stress/strain fields in the bone implant system may be relevant for better understanding of clinical situations and improving THA design. However, complete evaluation of load transfer in the bone remains difficult to assess experimentally, Hence, recently finite element method (FEM) was introduced in orthopaedic research field to fill the gap due to its unique capacity to evaluate stress in structure of complex shape, loading and material behavior. The authors developed the 3-dimensional numerical finite element model which is composed of totally 1179 elements off and 8 node blick. We also analyzed the micromotions at the bone-stem interface and mechanical behavior of existing bone prosthesis for a loading condition simulating the single leg stance. The result indicates that the values of relative motion for this well fit Multilock stem were $150{\mu}m$ in maximum, $82{\mu}m$ in minimum, and the largest relative motion developed in medial region of proximal femur with anterior-posterior direction. The proximal region of the bone was much larger in motion than the distal region and the stress pattern shows high stress concentration on the cortex near the tip of the stem. These findings indicates that the loading in the proximal femoral bone in the early postoperative situation can produce micromotions on the interface and clinically cementless TEA patient should not be allowed weight bearing strictly early in the postoperative period.

• Fashion & Textile Research Journal
• /
• v.19 no.4
• /
• pp.479-485
• /
• 2017

This study provides basic indices for the development of a pet dog's dummy. Surveys were conducted with 71 owners of small dogs weighing under 10kg as preliminary research for information on pet dogs, uses and complaints about their clothes and demographic information to investigate wearing conditions. We collected pictures of 30 products sold in 12 brands at home and abroad to analyze size, materials, and patterns and investigate the actual production conditions. The survey results on wearing conditions indicated that 'Maltese' was the breed most often raised in households. Dogs weighing 'between 3kg and 4kg' were most common. Dogs under five years of age took up 53.5%. Most of the clothes were 'S' size, followed by 'M' and 'L' Most responded, 'The overall size does not fit' as an inconvenience when worn for long. Second, most brands developed products in three sizes. The displayed details included neck and chest circumference, back length and dummy height. Cotton and artificial leather were used most often for the outer fabric, cotton for the internal filling along with wire and aluminum for some products to maintain shape and motions. Most dummies consisted of back+outer leg, belly, inner leg and sole. Sometimes, a composition line was added by the chest shape, and an incision was placed between the body and leg for breeds with thick legs. Most patterns had a composition line in the leg connected from the belly.

• Journal of the Korean GEO-environmental Society
• /
• v.16 no.5
• /
• pp.43-53
• /
• 2015

In this study, detection methods of outlier in various monitoring data that fit into big data category were developed and outlier detections were conducted for both artificial data and real field monitoring data. Rule-based methods applied rate of change and probability of error for monitoring data are effective to detect a large-scale short faults and constant faults having no change within a certain period. There are however, problems with misjudgement that consider the normal data with a large scale variation as outlier caused by using independent single dataset. Rule-based methods for noise faults detection have a limit to application of real monitoring data due to the problem with a choice of proper window size of data and finding of threshold for outlier judgment. A correlation analysis among different two datasets were very effective to detect localized outlier and abnormal variation for short and long-term monitoring dataset if reasonable range of training data could be selected.

• Journal of the Korea Institute of Building Construction
• /
• v.16 no.4
• /
• pp.331-339
• /
• 2016

According to high-rise, complexation, and enlargement of buildings, various construction methods are being developed, and the significance of construction method selection about main work types has emerged as a major interest. However, it has been pointed out that hand-on workers cannot consider project characteristics carefully, and they lack an objective standard or reference for main construction method selection. Hence, the selection is being made depending on hand-on workers' experience and intuition. To solve this problem, various studies have proceeded for construction method selection of main work types using Artificial Intelligence like Fuzzy, AHP and Case-based reasoning. It is difficult to apply many different kinds of construction method selection to every main work type with consideration for characteristics of work types and condition of a construction site when selecting construction method in the field. Accordingly, this study proposed the decision-making model which can apply to fields easily. Using matrix analysis and liner transformation, this study verified consistency of study models applied in the process of soil retaining selection with a case study.

• Journal of Digital Convergence
• /
• v.14 no.7
• /
• pp.167-174
• /
• 2016

The university and college turn into the field of job readiness to get a good job and students build a lot of job specification than others and are constantly studying for employment. Then since employment, some people are fortunate to keep the job for lifetime, but for many people work in the workplace did not meet his aptitude with patience and some people move for work several times without perseverance. One of the reasons for job dissatisfaction is that the job does not fit his aptitude. Meantime many organizations conducted the aptitude(Psychology) test. There are limits, however, to find a suitable job. This study was presented as a model of a platform that is a rational and scientific alternative to search course and job. This model is to better understand the individual characteristics using Big data and artificial intelligence, offers several jobs to meet the characteristics among the various professions selectively and supports to select and design an appropriate job based on the field experience, consulting and mentoring.

• Journal of Technologic Dentistry
• /
• v.40 no.4
• /
• pp.201-207
• /
• 2018

Purpose: The purpose of this study is to evaluate the fitness of lower jaw compete denture with glass fiber. Methods: Lower jaw edentulous model was selected as the master model. Ten study models were produced using Type IV stone(n=10). Lower jaw trial dentures were produced by the wax denture base and artificial teeth. Conventional complete denture (CD) group was fabricated by excluding glass fiber reinforcement (n=5). Glass fiber complete denture (GD) group was fabricated with glass fiber reinforcement (n=5). The lower jaw trial complete denture was invested using a plaster. PMMA resin was injected and curing was performed. The CD and GD groups measured the fit using silicone replica technology. The measured data was verified by t-test. Results: The anterior area of the CD group showed the smallest value. There was a statistically significant difference in the anterior area of the CD group and the GD group (p<0.05), but there was no statistically significant difference in the posterior area (p>0.05). Conclusion : Complete denture with glass fiber showed low fitness and further study is needed to apply it clinically.

• Journal of Industrial Convergence
• /
• v.20 no.6
• /
• pp.117-123
• /
• 2022

Appearance, which is directly related to competitiveness, has become one of the essential self-care for modern people living in the era of the 4th industrial revolution. For the purpose of producing more practical and convenient wigs for suffering customers, data of research subjects were collected through an information search portal site. The trend of new material development of leading wig companies was analyzed. As a result of the study, it was found that many applications for wig attachment and binding technology were applied before 2005, artificial hair-related manufacturing technology for wigs from 2006 to 2013, and functional-related wig technology after 2014. In addition, both H and M companies showed the development trend of new materials for shape memory materials and nanoskins with their own characteristics. We believe that this study will be provided as basic data for the development of functional wigs that can lead to customer satisfaction while providing customers with a comfortable and convenient fit in the wig industry market.