• 전기전자학회논문지
• /
• 제23권4호
• /
• pp.1387-1392
• /
• 2019

비구면 거울은 구형 거울보다 무게가 가볍고 성능이 우수하지만, 그 형상을 가공하고 가공 정밀도를 측정하는 것이 어렵다. 특히 위성에 사용되는 대형 조리개 비구면 미러는 높은 정밀도가 필요하고 처리하는 데 시간이 오래 걸린다. 기존의 연마 공정에는 갠트리 구조를 갖는 컴퓨터 수치 제어 공작기계가 사용되고 있으나, 자유도가 부족하여 복잡한 형상을 처리하기 어렵다는 단점이 있다. 이러한 문제를 극복하기 위해 다관절 산업용 로봇을 사용하는 연마 시스템을 개발하였다. 개발된 시스템은 공구 경로 생성 프로그램, 실시간 로봇 모니터링 및 제어 프로그램으로 구성되며, 시뮬레이션 소프트웨어와 실제 로봇 작동을 통해 개발된 시스템의 성능을 검증하였다.

• 한국기계가공학회지
• /
• 제2권4호
• /
• pp.33-39
• /
• 2003

The stiffness of multi-articulated industrial robots is very weak, because their structure is an articulated type with some links and joints. Thus it is known that cutting processes for metals are not accepted in machine shop well, but they have a lot of merits for cutting processes, for example, drilling, tapping, and engraving etc, because of the characteristics of their high degree of freedom. The temptation of cutting aluminium was carried out to investigate the feasibility and the limitations or constraints for cutting metals on them. First the mode shapes of 6 degree of freedom welding robot were taken and analysed, and next the cutting processes were practically carried out on it. The results of study were found out to show the feasibility of cutting processes at drilling under 6mm of tool diameter, as well as to have some limitations and constraints, for examples, feed rate, depth of cut and cutting force etc.

• 대한기계학회논문집A
• /
• 제36권1호
• /
• pp.103-108
• /
• 2012

본 논문에서는 수직다관절 로봇에 걸리는 중력 토크를 보상하는데 주로 사용되는 스프링 중력보상장치의 최적설계에 대하여 기술하였다. 스트레스, 좌굴, 피로 조건과 같은 스프링 설계에 대한 다수의 비선형 제약 조건을 반영하면서, 동시에 계산 시간을 줄이기 위하여, SQP(Sequential Quadratic Programming)를 적용하였다. 또한 정수해를 가져야 하는 설계 변수를 반영하기 위하여, Continuous Relaxation 방법을 사용하였다. 시뮬레이션을 통하여 설계된 중력보상 장치가 주요 작업 영역에서 추가의 무게 증가 없이 중력 보상 성능이 효과적으로 높아짐을 입증하였다.

• 한국산업융합학회 논문집
• /
• 제20권1호
• /
• pp.34-48
• /
• 2017

This study proposes a new approach to control a trajectory control of vertical type articulated robot arm with six revolution joints by computed torque method for manufacturing process automation. The proposed control scheme takes advantage of the properties of the fuzzy controllers. The proposed method is suitable to control of the trajectory and path control in cartesian space for vertical type articulated robot manipulator for forging manufacturing process automation. The results is illustrated that the proposed fuzzy computed torque controller is more stable and robust than the conventional computed torque controller. This study is included with an analytical methodology of inverse kinematic computation for 6 DOF manipulators. And an intelligent PID based on feed forward fuzzy control structure is applied to control the working path control with disturbances caused by uncertainty parameters of the manipulator dynamic model. Lastly, the validity of proposed is verified by simulations and experiments.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1986년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 17-18 Oct. 1986
• /
• pp.448-451
• /
• 1986

An automatic welding system is designed for a part of fork lift. The system is composed of articulated type welding robot, welding positioners, shuttle for robot, system controller and welding equipment. From the application of the system, stable weld quality and production cost saving are achieved. In this paper, the hardware features and control structure of the system are presented.

• 제어로봇시스템학회논문지
• /
• 제14권10호
• /
• pp.1022-1028
• /
• 2008

This article presents an omni-tread snake robot that designed to locomote on narrow space and rough terrain. The omni-tread snake robot comprises three segment, which are linked to each other by 2 degrees of freedom joints for the pitch and yaw motion. Moving tracks on all four sides of each segment guarantee propulsion even when the robot rolls over. The 2 DOF joint are actuated by 2 servo motors which produce sufficient torque to lift the one leading or trailing segments up and overcome obstacles. This paper applies articulated steering technique to get omni-tread snake robot's kinematics model.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1435-1440
• /
• 2008

High-speed train under development is a type of EMU(electric multiple units). Since power sources like motors and gears are distributed in the high-speed EMU, the high-speed EMU generates vibration and sound more than the articulated high-speed train. Vibration of vehicle, vibration between rails and wheels, hunting of bogie and snake motion reduce ride comfort. In this paper, to decrease the vibration of the articulated high-speed train, improvements were presented using an analytical model and a simulation model. The simulation model of the high-speed EMU was designed on the basis of the korean high-speed train and the design parameters for ride comfort were showed and the dynamic characteristics of the vehicle was understood. To consider the characteristics of the vehicle suspension, the analytical model was designed and the simulation model was verified with it.

• 한국정보기술응용학회:학술대회논문집
• /
• 한국정보기술응용학회 2005년도 6th 2005 International Conference on Computers, Communications and System
• /
• pp.357-360
• /
• 2005

Domestic enterprises are surveyed and analyzed to find the empirical relationship between environmental characteristics and electronic commerce(EC) performance. Dynamism, hostility and heterogeneity are selected as environmental characteristics. EC performance is articulated as EC utilization, EC satisfaction and EC usefulness. Empirical test presents that dynamism has a statistically significant relationship with EC performance except EC usefulness, but hostility and heterogeneity have no statistically significant relationship with EC performance. The impact of industry type on environmental characteristics and EC performance is also tested.

• 한국기계가공학회지
• /
• 제18권1호
• /
• pp.109-115
• /
• 2019

In arc-welding applying to the present automobile part manufacturing process, a wrist-hollow type arc welding robot can shorten the welding cycle time, because feedability of a welding wire is not affected by a robot posture and thus facilitates high-quality arc welding, based on stable feeding with no entanglement. In this paper, we will propose the optimization of wrist design for a wrist-hollow type 6-Axis articulated robot. Specifically, we will perform the investigation on the optimized design of inner diameter of hollow arms (Axis 4 and Axis 6) and width of the upper arm by using the simulation of robot motion characteristics, using a Genetic Algorithm (i.e., GA). Our simulations are based on $SolidWorks^{(R)}$ for robot modeling, $MATLAB^{(R)}$ for GA optimization, and $RecurDyn^{(R)}$ for analyzing dynamic characteristics of a robot. Especially $RecurDyn^{(R)}$ is incorporated in the GA module of $MATLAB^{(R)}$ for the optimization process. The results of the simulations will be verified by using $RecurDyn^{(R)}$ to show that the driving torque of each axis of the writs-hollow 6-axis robot with the optimized wrist design should be smaller than the rated output torque of each joint servomotor. Our paper will be a guide for improving the wrist-hollow design by optimizing the wrist shape at a detail design stage when the driving torque of each joint for the wrist-hollow 6-axis robot (to being developed) is not matched with the servomotor specifications.

• 한국항해항만학회지
• /
• 제32권1호
• /
• pp.23-27
• /
• 2008

컨테이너 크레인의 설계 시 적용되는 하중 조건 중에서 풍하중이 가장 중요하게 고려되어지는바, 본 연구는 75m/s의 풍하중이 컨테이너 크레인에 작용 할 때 컨테이너 크레인의 구조적 안정성에 미치는 영향을 보다 정확하게 예측하기 위하여 유동-구조 연성해석을 실시하였다. 컨테이너 크레인에 작용하는 실제 유동현상을 고려하기 위하여 먼저 전산유동해석을 실시하였으며, 이를 통해서 얻어진 풍하중을 구조해석의 하중조건으로 적용하는 유동-구조 연성해석을 통하여 컨테이너 크레인 각 지지점에서의 반력을 도출하고 그 결과를 분석하였다. 사용된 모델은 주변 환경으로 인하여 컨테이너 크레인의 최대 고도가 제한 될 경우 사용되는 관절형 컨테이너 크레인이며 전산유동해석 및 유동-구조 연성해석 프로그램으로는 ANSYS ICEM CFD 10.0과 ANSYS CFX 10.0을 사용하였다.