• Computers and Concrete
• /
• 제16권1호
• /
• pp.125-140
• /
• 2015

This paper describes the numerical calculation of elastic properties of a simulated microstructure of cement paste from very early age, when most previous models fail to give accurate results. The development of elastic properties of tricalcium silicate pastes was calculated by discretising a numerical resolution-free 3D vector microstructure to a regular cubic mesh. Due to the connections formed in the microstructure as an artefact of the meshing procedure, the simulated elastic moduli were found to be higher than expected. Furthermore, the percolation of the solids was found to occur even before hydration started. A procedure to remove these artefacts, on the basis of the information available in the vector microstructures was developed. After this correction, a better agreement of the experimental results with calculations was obtained between 20% and 40% hydration. However, percolation threshold was found to be delayed significantly. More realistic estimates of percolation threshold were obtained if either flocculation or a densification of calcium silicate hydrate with hydration was assumed.

• Wind and Structures
• /
• 제9권3호
• /
• pp.179-191
• /
• 2006

Parent wind data are often acknowledged to fit a Weibull probability distribution, implying that wind epoch maxima should fall into the domain of attraction of the Gumbel (Type I) extreme value distribution. However, observations of wind epoch maxima are not fitted well by this distribution and a Generalised Extreme Value (GEV) analysis leading to a Type III fit empirically appears to be better. Thus there is an apparent paradox. The reasons why advocates of the GEV approach seem to prefer it are briefly summarised. This paper gives a detailed analysis of the errors involved when the GEV is fitted to epoch maxima of Weibull origin. It is shown that the results in terms of the shape parameter are an artefact of these errors. The errors are unavoidable with the present sample sizes. If proper significance tests are applied, then the null hypothesis of a Type I fit, as predicted by theory, will almost always be retained. The GEV leads to an unacceptable ambiguity in defining design loads. For these reasons, it is concluded that the GEV approach does not seem to be a sensible option.

• Journal of Microbiology and Biotechnology
• /
• 제25권6호
• /
• pp.765-770
• /
• 2015

Recent sequencing technology development has revolutionized fields of microbial ecology. MiSeq-based microbial community analysis allows us to sequence more than a few hundred samples at a time, which is far more cost-effective than pyrosequencing. The approach, however, has not been preferably used owing to computational difficulties of processing huge amounts of data as well as known Illumina-derived artefact problems with amplicon sequencing. The choice of assembly software to take advantage of paired-end sequencing and methods to remove Illumina artefacts sequences are discussed. The protocol we suggest not only removed erroneous reads, but also dramatically reduced computational workload, which allows even a typical desktop computer to process a huge amount of sequence data generated with Illumina sequencers. We also developed a Web interface (http://biotech.jejunu.ac.kr/ ~abl/16s/) that allows users to conduct fastq-merging and mothur batch creation. The study presented here should provide technical advantages and supports in applying MiSeq-based microbial community analysis.

• 한국정밀공학회지
• /
• 제22권11호
• /
• pp.182-189
• /
• 2005

The human knee joint is the intermediate joint of the lower limb that is the largest and most complex joint in the body. Understanding of joint-articulating surface motion is essential for the joint wear, stability, mobility, degeneration, determination of proper diagnosis and so on. However, many studies analyzed the passive motion of the lower limb because of the skin marker artefact and some studies described medial and lateral condyle of a femur as a simple sphere due to the complexity of geometry. Thus, in this paper, we constructed a three-dimensional geometric model of the human knee from the geometry of its anatomical structures using non-uniform B-spline surface fitting as a study for the kinematic analysis of more realistic human knee model. In addition, we developed and verified 6-DOF contact model of the human knee joint using $C^2$ continuous surface of the inferior region of a femur, considering the relative motion of shank to thigh during locomotion.

• 한국수학교육학회지시리즈D:수학교육연구
• /
• 제15권2호
• /
• pp.141-158
• /
• 2011

In recent years, an increasing number of viewpoints hold that students should be engaged in a learning environment where understanding and knowledge transfer take place. This study introduces Mathematics Created by You (MCY)-mentoring program, which allows students to construct artefacts that are required to learn. This program is online-based and so can be shared by several people and mathematics leaning takes place through interactions within this carefully designed environment. Also, MCY intends to provide students a series of sequential activities related to creative play, creative learning and creative inquiry based on a Constructive and interactive environment. Furthermore, a creative activity- constructing a creative product using building blocks- was presented as an example. Finally, we investigate the pedagogical implications and suggest directions for the further development.

• Journal of Acupuncture Research
• /
• 제35권3호
• /
• pp.104-107
• /
• 2018

Background: Reduced impedance at acupuncture points (acupoints) is a well-known phenomenon; and the impedance has been found to reduce further in relation to organ stress. The author hypothesises that any changes to an organ's state or function are communicated to its related acupoints in real time. As part of a research project to demonstrate this communication, the impedance of several acupoints was studied in real time. Methods: The acupoints were located electrically, and a 40 kHz signal was used to sample the impedances. Samples were taken at each acupoint and also at a 6 mm radius. The sample rate was 1 kHz and the session lasted for 5 minutes. The results presented here were taken from a single patient. Results: The impedance at an acupoint's centre frequently changed in an inverse relationship to the impedance at a 6 mm radius (i.e. when one goes up, the other goes down) and the left and right instance of the same acupoint usually displayed different impedance features. Conclusion: When studying the fine detail of real-time impedance samples taken from the centre of an acupoint and also from a 6 mm radius, this previously unreported contrary-motion phenomenon provides a useful tool to differentiate between artefact and genuine organ-related features in an impedance trace.

• 생약학회지
• /
• 제17권2호
• /
• pp.161-167
• /
• 1986

The smear method developed by Velaskar and Chitre was modified to allow the screening of plant extracts and/or fractions for platelet anti-aggregating activity. The modified smear method was also found suitable for massive screening of pure compounds. Sample fractions prepared from various plant extracts were examined for their effects against ADP, arachidonic acid (AA) or collagen induced platelet aggregations. Several solvent fractions of plant extracts including water fraction prepared from the methanol extract of Acanthopanax sp. was inhibitory against rat platelet aggregations. The activity guided treatments and fractionations of the water fraction from A. senticosus Max yielded two anti-platelet aggregatory substances, 3, 4-dihydroxybenzoic acid (I) and its artefact ethyl 3, 4-dihydroxybenzoate(II). The inhibitory activities of I and II against rat platelet aggregation were compared with that of aspirin, a known inhibitor of platelet aggregation. Discussions also included the results of the investigations on the structural activity relationships among the various dihydroxybenzoic acid derivatives against platelet aggregations induced by either one of ADP, AA or collagen.

• International Journal of Precision Engineering and Manufacturing
• /
• 제8권3호
• /
• pp.14-19
• /
• 2007

Rapid prototyping (RP) technology can fabricate any 3D physical model regardless of geometric complexity using the layered manufacturing (LM) process. Stereolithography (SL) is the best-known example of RP technology. In general, the surface quality of a raw SL-generated part is unsatisfactory for industrial purposes due to the step artefact created by the LM process. Despite of the increased number of applications for SL parts, this side effect limits their uses. In order to improve their surface quality, additional post-machining finishing, such as traditional grinding, is required, but post-machining is time consuming and can reduce the geometric accuracy of a part. Therefore, this study proposes a post-machining technology combining coating and grinding processes to improve the surface quality of SL parts. Paraffin wax and pulp are used as the coating and grinding materials. By grinding the coating wax only up to the boundary of the part, the surface smoothness can be improved without damaging the surface. Finally, moulding and casting experiments were performed to confirm the suitability of the SL parts finished using the proposed process with rapid tooling (RT) techniques.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제6권9호
• /
• pp.2351-2369
• /
• 2012

This paper describes interpolation method of motion field in the Wyner-Ziv video coding (WZVC) based on Expectation-Maximization (EM) algorithm. In the EM algorithm, the estimated motion field distribution is calculated on a block-by-block basis. Each pixel in the block shares similar probability distribution, producing an undesired blocking artefact on the pixel-based motion field. The proposed interpolation techniques are Bicubic and Lanczos which successively use 16 and 32 neighborhood probability distributions of block-based motion field for one pixel in k-by-k block on pixel-based motion field. EM-based WZVC codec updates the estimated probability distribution on block-based motion field, and interpolates it to pixel resolution. This is required to generate higher-quality soft side information (SI) such that the decoding algorithm is able to make syndrome estimation more quickly. Our experiments showed that the proposed interpolation methods have the capability to reduce EM-based WZVC decoding complexity with small increment of bit rate.

• 디자인학연구
• /
• 제2권1호
• /
• pp.117-130
• /
• 1989

Evaluation is to be seen a~ a central component of design activity. It is an attempt to ensure that the proposal which arises is accepted and that the resulting artefact itself suited to its purposes in practice. Recent surveys of Evaluation show that most methods require quantitative and explicit attributes. Always a significant part of the attributes of design proposals is qualitative. Therefore we need some study that convert qualitative attributes into quantitative scale values, because in many cases con\ulcornerclusions can be drawn about the order of the overall value of the design proposals. Following to Thurstone's psychological scaling methods, attributive values are assigned by ruting scale methods, met, hod of rank-order and method of paired comparisons. The problem of psycho\ulcornerlogical scaling is then to determine whether the stimuli can be ordered on a psychological continuum with respect to the degree of the attributes each possesses. The law of comparative judgement assumes that for a given stimulus there is associated a most frequently aroused or modal discriminal process on a psychological continuum. This paper is based upon the premise that the modal discriminul process will also be the same as the mean or median of the distribution.The objective of this paper is to argue for an acceptance of qualitative approaches to the evalua\ulcornertion of Design as a complement to the existing quantitative techniques. The scale values of 10 attri\ulcornerbutes \ulcorner(1) originality, (2) aesthetics, (3) satisfaction, (4) effeciency, (5) function, (6) size, (7) texture, (8) simplicity, (9) symbol, and (10) facility) in case of TV sets are obtained and their interactions are examined.