• FLOWER RESEARCH JOURNAL
• /
• v.19 no.3
• /
• pp.151-157
• /
• 2011

This research was aimed to extend the vase life and improve the quality of cut roses 'Marina'. This study investigated the effect of three different angles and sucrose concentration on the vase life and the quality of cut rose flowers. In first experiment, cut roses were placed in three different angles ($0^{\circ}$, $45^{\circ}$ and $90^{\circ}$) in holding solutions containing 0.5, 1 and 2% sucrose (soaking treatment), and examined the number of petals of cut roses. In second experiment, cut roses were placed in three different angles after pre-treated in 0, 1, 2 and 4% sucrose solution for 2 and 20 hours, and examined the flower diameter of cut roses. In third experiment, cut roses were examined the pigmentation, flowing response and chlorophyll contents in cut roses by three different angles after pulsing treatment (pre-treatment) in holding solution containing 2% sucrose for 2 and 20 hours. Results of this study showed that cut roses were influenced by arranging angles and sucrose concentrations. The vase life of cut roses were extended in $45^{\circ}$ and $90^{\circ}$ arranging angle, as compared with the control (distilled water), and the holding solution containing 2% sucrose significantly increased vase life of cut roses(P < 0.05). Flower diameter of cut roses pre-treated in 4% sucrose solution for 2 and 20 hours significantly decreased (P < 0.05). The pigmentation and flowing response in cut roses were beneficial in $45^{\circ}$ arranging angle treated with 2% sucrose solution for 2 and 20 hours. Chlorophyll content in leaves of cut roses was not influenced by arranging angles. The pigmentation and flowing response of $0^{\circ}$ and $45^{\circ}$ arranging angles were better than that of 90 arranging angle. The vase life of cut roses in $45^{\circ}$ arranging angle was more prolonged than that in $90^{\circ}$ arranging angle. In conclusion, the arranging angles seem to be effective in retarding senescence of cut rose flowers.

• Journal of Biosystems Engineering
• /
• v.26 no.6
• /
• pp.563-570
• /
• 2001

To develop a stalk detaching system the effect of shape factor of red pepper affecting the performance of unfolding, arranging and cutting was analysed. The obtained results are as follows : By cutting experiment, it was found that the bending of stalk affected the cutting rate of stalk, and that the bending of body increased the amount of peppers that were expelled from the cutting guide by conveying brush. The ratios, 'bending length of a body/body length'and 'bending length of a stalk/stalk length', could be used as criteria far abnormality of body and stalk of peppers, respectively. As a result of experiment, it was concluded that mechanical treatment would be difficult for the peppers with indexes greater than 0.4 and 0.3 fur body bending and stack bending. respectively. So, these indexes were used as criteria for distinguishing abnormality from normality of peppers. In the unfolding unit, conveyance of peppers was impossible for both of normal and abnormal ones at the inclination angle of 10°, especially, at the frequency of 8.3 Hz peppers maintained stationary state. At the inclination angle of 20°, both of normal and abnormal peppers showed similar tendencies, but abnormal ones showed an accumulation trend gradually with increased feeding speed. In the arranging unit, conveyance of peppers was almost impossible for both of normal and abnormal ones at the inclination angle of 20°, showing almost no difference between the conveyances of normal and abnormal ones. In the case of the inclination angle of 30°, at the condition of the feeding speeds and frequency corresponding 0.06 m/s, 0.08 m/s and 8.3 Hz, respectively, the passing time of the abnormal peppers on the arranging plate increased rapidly.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.415-420
• /
• 2009

Selective Catalytic Reduction(SCR) has been used for the reduction of $NO_x$ in a steam supply boiler. Recently, the reduction of $NO_x$ becomes an important research field because of its negative effect on an environment. Shape optimization of circular poles installed in the chamber, which is located in upstream of a SCR, has been performed using response surface method and three-dimensional Navier-Stokes analysis to enhance gas flow uniformity. Three design parameters, diameter, arranging angle and stretching ratio of circular poles, are considered in the present study. Throughout the shape optimization of a circular pole, gas flow uniformity is successfully increased by decreasing local recirculation flow in a square duct chamber. Recirculation flow observed in the corner of the square duct can be reduced by proper installation of a guide vane or a blunt body. Detailed flow characteristics are also analyzed and discussed.

• Journal of Positioning, Navigation, and Timing
• /
• v.5 no.1
• /
• pp.37-45
• /
• 2016

In this paper, design and implementation issues for a network-oriented RF emitter localization system with array antenna are discussed. For hardware, the problem of array mismatch and RF/IF channel mismatch are introduced and the calibration schemes for solving those problems are also provided. For software, it is explained how to overcome the drawback of conventional MUltiple Signal Identification and Classification (MUSIC) algorithm in a point of identifying the number of received signals and problems such as Data Association Problem and Ghost Node Problem in regard to multiple emitter localization are presented with some approaches for getting around those problems. Finally, for implementation, a criterion for arranging each of sensors and a requirement for alignment of array antenna' orientation are also given.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2005.05a
• /
• pp.110-115
• /
• 2005

Show window display is a technique of arranging goods for sales promotion, namely, motivating and inducing customers to purchase products. It is not simply exhibiting articles but a technical expression of values retained in exhibited articles and an integrated visual art comprehending color, lighting effect, the customers' angle of vision, differentiation from neighboring stores, harmony with properties, assistive roles of relevant goods, and entire messages provided by these elements. Show window display plays the role of a medium that expresses brand images and attracts consumers. Through the medium, the company's brand image is recognized and the recognition determines the trend of brand sales. Brand images planted to consumers seldom change, and wrong recognition affects not only the brand image but also the company image. The present study purposed to suggest show window display employing brand images different from traditional show window display, to examine the effects of brand images on consumers' intention to purchase, and to propose display design.

• Tunnel and Underground Space
• /
• v.28 no.6
• /
• pp.584-595
• /
• 2018

This study conducted direct shear test on about 290 sorts of materials such as sandy soil, clayey soil and gravely soil to present proper standard on shear strength of soil. Shear strength of soil in large scale tends to show that angle of internal friction increases as sand contents grow and it ranges $23.5^{\circ}{\sim}34.9^{\circ}C$ with cohesion of 2.0 kPa~15.7 kPa. Elastic modulus was visibly distinct by load, and which increased approximately 80% as vertical load grows. Angle of internal friction arranging $15.0^{\circ}{\sim}28.6^{\circ}$ on clayey soil decreased as clay contents rises and cohesion increase in regular scale. Elastic modulus tends to increase initial elastic modulus with almost same growing rate. While angle of internal friction on gravely soil indicates $29.9^{\circ}{\sim}36.7^{\circ}$ which hardly shows distinctive features. According to test in detail, cohesion of SW (well-graded sand), SP (poorly-graded sand), SC (clayey sand) and SM (silty sand) indicates value by 94%, 78% and 59% comparing to SC, SW and SP respectively. Angle of internal friction of ML (low-liquid limit silt) and CL (low-liquid limit clay) appears almost same features, and MH (high-liquid limit silt) despite of 88% value of ML. Cohesion among them varies with similar growing rate.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1994.04a
• /
• pp.375-384
• /
• 1994

Depending upon the eye and head movement, the visual field is often classified into three categories; stationary field, eye field and head field. To investigate the effect of background condition on the size of stationary field, an experiment was conducted, in which the subject was instructed to search a target with distinct orientations. In each trial, a single target was presented on the rear-view screen projected by the two-field tachistoscope, with the visual angle subtended 4.3.deg. vertically and horizontally. Density, meridian and subject showed a significant effect on stationary field at .alpha.=0.01, where density was inversely proportional to the size of stationary field. The size of the stationary field on horizontal axis was larger than that on vertical axis, and that on right and below meridian also larger than on left and lower meridian. The shape was found to be horizontally oriented oval and statistically asymmetric with respect to horizontal and vertical axes. The regression equation to predict stationary field on the given background condition was suggested. These results were expected to be used as a designing guideline when arranging displays and controls on panels such as automobile display panels, cockpits, etc. In addition, it can be inferred from the results that eye field and head field are also subjected to the influence of background condition.

• Journal of the Ergonomics Society of Korea
• /
• v.14 no.1
• /
• pp.59-67
• /
• 1995

Depending upon the eye and head movement, the visual field is often classified into three categories ; stationary field, eye field and head and eye field. To investigate the effect of background condition on the size of the visual field, an experiment was conducted, in which the subject was instructed to search a target with distinct orientations. In each trial, a single target was presented on the perimeter modified to cover the range of 330 .deg. around the fixation point, with the visual angle subtended 1.4 .deg. vertically and horizontally. Nontarget density, meridian, size contrast and subject showed a significant effect on the visual field at .alpha. =0.01, where density was inversely proportional to the size of the visual field, and size contrast linearly proportional to the size of the visual field. The size of the visual field on horizontal axis was larger than that on vertical axis, and that on right and upper meridian was also larger than on left and lower meridian. The shape was found to be horizontally oriented oval and statistically asymmetric with respect to horizontal and vertical axes. In addition, the regression equations to predict the visual field on the given background condition were suggested. These results were expected to be used as a design guideline when arranging displays and controls on panels such as automobile display panels, cockpits, etc.

• Current Optics and Photonics
• /
• v.7 no.3
• /
• pp.263-272
• /
• 2023

A collimator refers to an optical system that images a collimated beam at a desired point. A resolution target located at a near distance can be converted into a virtual image located at a long distance. To test the resolution for mobile cameras, a large target is placed at a long distance. If a collimator system is used, the target can be placed at a near distance. The space required for a resolution inspection can thus be drastically reduced. However, to inspect a mobile camera, the exit pupil of the collimator system and the entrance pupil of the mobile camera must match, and the stop of the collimator system must be located on the last surface. Because a collimator system cannot be symmetrical with respect to the stop, the distortion becomes extremely large, which can be corrected by combining the collimator symmetrically with respect to the object plane. A novel system was designed to inspect an optical lens on a mobile phone. After arranging the refractive power, lenses were added using the equivalent lens design method. The distortion was reduced to less than 1%. This optical system satisfies a half-field angle of 45° and an optical performance sufficient for inspection.

• Journal of the Korean Society of Costume
• /
• v.66 no.8
• /
• pp.78-97
• /
• 2016

The purpose of this study is to develop textile pattern designs by utilizing the prototype of traditional culture extracted from cultural resources in order to establish a specialty strategy for local cultural contents. To achieve this, the study selected the Hyojaemunjado as source of Jeju traditional culture. Jeju's Hyojaemunjado is characterized mainly by the creative and unique formativeness of Jeju's character paintings. Character paintings often contained images related to the characters featured inside characters, or composed stroke with symbolic iconography. The main subjects of Hyojaemunjado were stories that alluded to the Confucian virtues. Therefore, the purpose of this study was to remind people of the real meaning of Shin(truth) by developing textile pattern designs, which borrows the tessellation technique for design, and the dominant characteristic of geometric abstraction. This study used theoretical research and empirical analysis. First, the study did the theatrical research on Hyojaemunjado based on literature and precedent studies, and then analyzed the style of expression and formativeness on the Shin character paintings through real analysis of Jeju's Hyojaemunjado kept in Jeju National University Museum. Second, based on the analysis of the style(three-tier composition) and formativeness of Hyojaemunjado, it analyzed the formativeness of the iconography about Shin, i.e. character types(semi cursive style, square style) drawn according to the symbolic meaning, palace, unknown flower, pheasant, tile fish and constellation. Based on analysis of the iconography, it stylized the motives that became available on the Archimedean tiling of tessellation, and then developed the textile pattern designs by arranging the iconographic motives with Platonic tiling and Semi-tiling. The reason why this study borrowed tessellation was to create various visual effects using the size of angle, symmetry and change and joint with simple figure.