• 화훼연구
• /
• 제19권3호
• /
• pp.151-157
• /
• 2011

본 연구는 장미의 절화수명 연장과 품질을 향상시키기 위한 목적으로 삽지각도, sucrose 전처리 시간 그리고 sucrose 농도가 절화수명에 미치는 영향을 조사하기 위해서 수행하였다. Sucrose soaking 처리시 sucrose 농도는 0.5, 1 및 2% 그리고 sucrose pulsing 처리시 sucrose 농도는 0, 1, 2, 및 4%를 이용하였다. Sucrose pulsing처리는 2 hrs 및 20 hrs 전처리 한 다음 실험을 수행하였다, 시험관에 100 mL씩 각각의 보존용액을 채운 후 삽지각도는 수평($0^{\circ}$), 수직($90^{\circ}$) 그리고 중간정도($45^{\circ}$)를 유지하여 실험을 수행하였다. Sucrose soaking 처리시 sucrose 농도와 각도에 따라서 꽃잎의 개화가 영향을 받은 것으로 보아 절화수명 연장을 위해서는 sucrose 농도를 높게 하고 각도를 수직으로 유지하는 것이 좋을 것으로 사료된다. 그리고 sucrose pulsing 2hrs 및 20 hrs 전처리 후, 삽지각도 $45^{\circ}$ 처리구에서는 개화가 지연되고 색상의 유지가 양호하였으나 $90^{\circ}$ 처리구에서는 조사 시작일 부터 개화가 빠르게 진행되고 색상도 빠르게 변색이 진행되므로 절화수명연장의 측면에서 삽지각도 $90^{\circ}$는 바람직하지 못한 것으로 사료된다.

• Journal of Biosystems Engineering
• /
• 제26권6호
• /
• pp.563-570
• /
• 2001

To develop a stalk detaching system the effect of shape factor of red pepper affecting the performance of unfolding, arranging and cutting was analysed. The obtained results are as follows : By cutting experiment, it was found that the bending of stalk affected the cutting rate of stalk, and that the bending of body increased the amount of peppers that were expelled from the cutting guide by conveying brush. The ratios, 'bending length of a body/body length'and 'bending length of a stalk/stalk length', could be used as criteria far abnormality of body and stalk of peppers, respectively. As a result of experiment, it was concluded that mechanical treatment would be difficult for the peppers with indexes greater than 0.4 and 0.3 fur body bending and stack bending. respectively. So, these indexes were used as criteria for distinguishing abnormality from normality of peppers. In the unfolding unit, conveyance of peppers was impossible for both of normal and abnormal ones at the inclination angle of 10°, especially, at the frequency of 8.3 Hz peppers maintained stationary state. At the inclination angle of 20°, both of normal and abnormal peppers showed similar tendencies, but abnormal ones showed an accumulation trend gradually with increased feeding speed. In the arranging unit, conveyance of peppers was almost impossible for both of normal and abnormal ones at the inclination angle of 20°, showing almost no difference between the conveyances of normal and abnormal ones. In the case of the inclination angle of 30°, at the condition of the feeding speeds and frequency corresponding 0.06 m/s, 0.08 m/s and 8.3 Hz, respectively, the passing time of the abnormal peppers on the arranging plate increased rapidly.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.415-420
• /
• 2009

Selective Catalytic Reduction(SCR) has been used for the reduction of $NO_x$ in a steam supply boiler. Recently, the reduction of $NO_x$ becomes an important research field because of its negative effect on an environment. Shape optimization of circular poles installed in the chamber, which is located in upstream of a SCR, has been performed using response surface method and three-dimensional Navier-Stokes analysis to enhance gas flow uniformity. Three design parameters, diameter, arranging angle and stretching ratio of circular poles, are considered in the present study. Throughout the shape optimization of a circular pole, gas flow uniformity is successfully increased by decreasing local recirculation flow in a square duct chamber. Recirculation flow observed in the corner of the square duct can be reduced by proper installation of a guide vane or a blunt body. Detailed flow characteristics are also analyzed and discussed.

• Journal of Positioning, Navigation, and Timing
• /
• 제5권1호
• /
• pp.37-45
• /
• 2016

In this paper, design and implementation issues for a network-oriented RF emitter localization system with array antenna are discussed. For hardware, the problem of array mismatch and RF/IF channel mismatch are introduced and the calibration schemes for solving those problems are also provided. For software, it is explained how to overcome the drawback of conventional MUltiple Signal Identification and Classification (MUSIC) algorithm in a point of identifying the number of received signals and problems such as Data Association Problem and Ghost Node Problem in regard to multiple emitter localization are presented with some approaches for getting around those problems. Finally, for implementation, a criterion for arranging each of sensors and a requirement for alignment of array antenna' orientation are also given.

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2005년도 춘계학술발표대회 논문집
• /
• pp.110-115
• /
• 2005

Show window display is a technique of arranging goods for sales promotion, namely, motivating and inducing customers to purchase products. It is not simply exhibiting articles but a technical expression of values retained in exhibited articles and an integrated visual art comprehending color, lighting effect, the customers' angle of vision, differentiation from neighboring stores, harmony with properties, assistive roles of relevant goods, and entire messages provided by these elements. Show window display plays the role of a medium that expresses brand images and attracts consumers. Through the medium, the company's brand image is recognized and the recognition determines the trend of brand sales. Brand images planted to consumers seldom change, and wrong recognition affects not only the brand image but also the company image. The present study purposed to suggest show window display employing brand images different from traditional show window display, to examine the effects of brand images on consumers' intention to purchase, and to propose display design.

• 터널과지하공간
• /
• 제28권6호
• /
• pp.584-595
• /
• 2018

흙의 전단강도의 적절한 기준을 제시하기 위해 모래질, 점토질, 자갈질의 약 290 여개의 재료에 대하여 직접전단시험을 수행하였다. 흙의 대분류에 의한 모래질 흙의 전단강도는 모래 함유율이 많은 흙일수록 내부마찰각은 증가하는 경향이 뚜렷하게 나타났으며, 그 범위는 $23.5^{\circ}{\sim}34.9^{\circ}$에 분포하고 있는 것으로 나타났고, 점착력은 2.0 kPa~15.7 kPa 사이에서 골고루 분포하는 것으로 나타났다. 탄성계수는 하중단계에 따라 뚜렷하게 구분할 수 있었으며, 수직하중이 증가할수록 약 80%씩 증가하였다. 점토질 흙의 내부마찰각은 $15.0^{\circ}{\sim}28.6^{\circ}$의 범위에서 점토성분 함유율이 많아질수록 감소하는 경향이 나타났고, 점착력은 일정한 범위로 증가하는 경향이 나타났다. 점토질 흙의 탄성계수는 거의 같은 증가비로 초기탄성계수만 약간 증가하는 경향을 나타내었다. 자갈질 흙의 내부마찰각은 $29.9^{\circ}{\sim}36.7^{\circ}$의 범위로 뚜렷한 특성을 파악할 수 없었다. 세부분류에 따른 SW(입도분포가 좋은 모래), SP(입도분포가 나쁜 모래), SC(점토 섞인 모래), SM(실트 섞인 모래)의 점착력은 실트함유율이 가장 많은 SM 시료에 비해 SC는 약 94%, SW는 약 78%, SP는 약 59% 정도 값을 나타내었다. 또한 내부마찰각은 ML(액성한계가 낮은 실트)과 CL(액성한계가 낮은 점토)이 거의 같은 거동 특성을 나타내었고, MH(액성한계가 높은 실트)는 ML의 약 88% 값을 나타내었다. 점착력에 대한 변화는 거의 비슷한 증가비를 나타내었다.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1994년도 춘계공동학술대회논문집; 창원대학교; 08월 09일 Apr. 1994
• /
• pp.375-384
• /
• 1994

Depending upon the eye and head movement, the visual field is often classified into three categories; stationary field, eye field and head field. To investigate the effect of background condition on the size of stationary field, an experiment was conducted, in which the subject was instructed to search a target with distinct orientations. In each trial, a single target was presented on the rear-view screen projected by the two-field tachistoscope, with the visual angle subtended 4.3.deg. vertically and horizontally. Density, meridian and subject showed a significant effect on stationary field at .alpha.=0.01, where density was inversely proportional to the size of stationary field. The size of the stationary field on horizontal axis was larger than that on vertical axis, and that on right and below meridian also larger than on left and lower meridian. The shape was found to be horizontally oriented oval and statistically asymmetric with respect to horizontal and vertical axes. The regression equation to predict stationary field on the given background condition was suggested. These results were expected to be used as a designing guideline when arranging displays and controls on panels such as automobile display panels, cockpits, etc. In addition, it can be inferred from the results that eye field and head field are also subjected to the influence of background condition.

• 대한인간공학회지
• /
• 제14권1호
• /
• pp.59-67
• /
• 1995

Depending upon the eye and head movement, the visual field is often classified into three categories ; stationary field, eye field and head and eye field. To investigate the effect of background condition on the size of the visual field, an experiment was conducted, in which the subject was instructed to search a target with distinct orientations. In each trial, a single target was presented on the perimeter modified to cover the range of 330 .deg. around the fixation point, with the visual angle subtended 1.4 .deg. vertically and horizontally. Nontarget density, meridian, size contrast and subject showed a significant effect on the visual field at .alpha. =0.01, where density was inversely proportional to the size of the visual field, and size contrast linearly proportional to the size of the visual field. The size of the visual field on horizontal axis was larger than that on vertical axis, and that on right and upper meridian was also larger than on left and lower meridian. The shape was found to be horizontally oriented oval and statistically asymmetric with respect to horizontal and vertical axes. In addition, the regression equations to predict the visual field on the given background condition were suggested. These results were expected to be used as a design guideline when arranging displays and controls on panels such as automobile display panels, cockpits, etc.

• Current Optics and Photonics
• /
• 제7권3호
• /
• pp.263-272
• /
• 2023

A collimator refers to an optical system that images a collimated beam at a desired point. A resolution target located at a near distance can be converted into a virtual image located at a long distance. To test the resolution for mobile cameras, a large target is placed at a long distance. If a collimator system is used, the target can be placed at a near distance. The space required for a resolution inspection can thus be drastically reduced. However, to inspect a mobile camera, the exit pupil of the collimator system and the entrance pupil of the mobile camera must match, and the stop of the collimator system must be located on the last surface. Because a collimator system cannot be symmetrical with respect to the stop, the distortion becomes extremely large, which can be corrected by combining the collimator symmetrically with respect to the object plane. A novel system was designed to inspect an optical lens on a mobile phone. After arranging the refractive power, lenses were added using the equivalent lens design method. The distortion was reduced to less than 1%. This optical system satisfies a half-field angle of 45° and an optical performance sufficient for inspection.

• 복식
• /
• 제66권8호
• /
• pp.78-97
• /
• 2016

The purpose of this study is to develop textile pattern designs by utilizing the prototype of traditional culture extracted from cultural resources in order to establish a specialty strategy for local cultural contents. To achieve this, the study selected the Hyojaemunjado as source of Jeju traditional culture. Jeju's Hyojaemunjado is characterized mainly by the creative and unique formativeness of Jeju's character paintings. Character paintings often contained images related to the characters featured inside characters, or composed stroke with symbolic iconography. The main subjects of Hyojaemunjado were stories that alluded to the Confucian virtues. Therefore, the purpose of this study was to remind people of the real meaning of Shin(truth) by developing textile pattern designs, which borrows the tessellation technique for design, and the dominant characteristic of geometric abstraction. This study used theoretical research and empirical analysis. First, the study did the theatrical research on Hyojaemunjado based on literature and precedent studies, and then analyzed the style of expression and formativeness on the Shin character paintings through real analysis of Jeju's Hyojaemunjado kept in Jeju National University Museum. Second, based on the analysis of the style(three-tier composition) and formativeness of Hyojaemunjado, it analyzed the formativeness of the iconography about Shin, i.e. character types(semi cursive style, square style) drawn according to the symbolic meaning, palace, unknown flower, pheasant, tile fish and constellation. Based on analysis of the iconography, it stylized the motives that became available on the Archimedean tiling of tessellation, and then developed the textile pattern designs by arranging the iconographic motives with Platonic tiling and Semi-tiling. The reason why this study borrowed tessellation was to create various visual effects using the size of angle, symmetry and change and joint with simple figure.