• Journal of Environmental Impact Assessment
• /
• v.5 no.1
• /
• pp.79-85
• /
• 1996

Simultaneous monitoring in many locations is necessary to evaluate the air quality and analyze future trend of a city, For this purpose, it is essential to install air pollution monitoring network. The first automatic air pollution monitoring network was introduced Seoul in 1973. As of 1995, 20 monitoring stations are now in operation. Concerning the management of the air pollution monitoring network, there was some argument among the relavant scholars, non-governmental organization(NGO) and the government organization. So far, there was no extensive evaluation and analysis about the network. The purpose of this study was to evaluate the representativeness of air quality monitoring network through actual measurement of the concentration of the air pollutant. The concentration of NOx was extensively measured widely in Seoul area three times using the TEA simple measuring technique. Even the judgement level for the area representativeness was lowered to 80%, Ssangmun-dong monitoring station tend to overestimate the pollutant concentration of the covered area. While, Sinlimdong monitoring station tend to underestimate the pollutant concentration of the covered area.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.61 no.4
• /
• pp.174-179
• /
• 2012

The social and economic level of damages might be highly increased in the case of wide-area black-outages, because of heavy dependence of electricity. Therefore, the development of a wide-area protection relay intelligence techniques is required to prevent massive power outages and minimize the impact strength at failure. The frequency monitoring and prediction for wide-area protection relaying intelligence has been considered as an important technology. In this paper, a network-based frequency monitoring system developed for wide-area protection relay intelligence is presented. In addition, conventional techniques for frequency estimation are compared, and a method for advanced frequency estimation and measurement to improve the precision is proposed. Finally, an integrated monitoring system called K-FNET(Korea-Frequency Monitoring Network) is implemented based on the GPS and various energy monitoring cases are studied.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.320-320
• /
• 2013

Film thickness monitoring with plasma impedance monitoring (PIM) is demonstrated for small area $SiO_2$ RF plasma etching processes in this work. The chamber conditions were monitored by the impedance signal variation from the I-V monitoring system. Moreover, modified principal component analysis (mPCA) was applied to estimate the $SiO_2$ film thickness. For verification, the PIM was compared with optical emission spectroscopy (OES) signals which are widely used in the semiconductor industry. The results indicated that film thickness can be estimated by 1st principal component (PC) and 2nd PC. Film thickness monitoring of small area $SiO_2$ etching was successfully demonstrated with RF plasma harmonic impedance monitoring and mPCA. We believe that this technique can be potentially applied to plasma etching processes as a sensitive process monitoring tool.

• Proceedings of the KIEE Conference
• /
• 2007.10c
• /
• pp.229-231
• /
• 2007

The CCTV, closed circuit television, system is the most popular method to monitor some specific area. The CCTV-based monitoring system is composed of a lot of cameras installed the areas, and monitors to display the vision through the cameras. However, these systems have limitations to prevent some problems or to cope with the problems promptly, because they can carry out only the function that shows us the analogue images of the cameras. Especially, urban transit service area is the space where many people crowd in all at the same time and the space is not only wide but also distributed sporadically. This paper presents the efficient plan for video-based monitoring system to monitor urban transit service area. To build the efficient monitoring system, it is necessary to devide the monitoring area to appropriate sectors that should be composed to be displayed at a time. If the proposed method is used to construct the video-based monitoring system, the operating officers in the urban transit have the more direct and real images.

• Journal of Korean Society for Atmospheric Environment
• /
• v.13 no.6
• /
• pp.415-426
• /
• 1997

Some arguments have been about over the representativeness of government-run air quality monitoring stations among scholars and non-governmental organizations (NGOs). However, it is not a simple problem to move monitoring stations because of continuity of data and high cost. So it is necessary to complement the monitoring data if it do not represent the ambient air quality properly. The purpose of this study was to evaluate the representativeness of some monitoring stations using passive $NO_2$ samplers and to find a complementary method from linear regression. Two stations were chosen for the evaluation: Shinlim Station was one of the most controversial stations in Seoul and Banpo Station had the best reputation. Air qualities were surveyed at seven points around each monitoring station with consideration of land use and distance. The ratios of the average $NO_2$ levels of the areas to these at the monitoring stations were 1.59 for Shinlim Station and 1.03 for Banpo Station. The differences between the average $NO_2$ levels and those at the monitoring stations were 10.75 ppb for Shilim Station and 0.34 ppb for Banpo Station. The correlation coefficients between the two levels were 0.7668 for Shinlim and 0.7662 for Banpo. The average coefficients of determination $(R^2)$ were 0.61 for Shinlim and 0.61 for Banpo. The Shinlim Station could not represent the air quality of Shinlim-Dong good because it is located in a green area at an outskirt of Shinlim-Dong. But the Banpo Station located in a central residential area of Banpo-Dong showed a fair representativeness. However, air quality turned out to be different with land use such as residential area, green area or road: the air quality data from a monitoring station located at a certain land use should not be interpreted as representing the air quality at any sites around the station. Equations to predict the average $NO_2$ levels of each area from the data from the monitoring stations were presented based on linear regression.

• International conference on construction engineering and project management
• /
• 2007.03a
• /
• pp.88-95
• /
• 2007

In this paper, the authors discussed the overview of a method for estimating working area for development of a monitoring system for labor management using RFID technology. RSSI (Receive Signal Strength Indication) data of RFID tag was obtained from readers set around the indoor space. An estimating model of the working area was prepared. The model had a range of the percentage of correctly classified from 61% to 95%. According to the result, the possibility of the monitoring system and the factors necessary to develop for practical were proposed.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.11 no.4
• /
• pp.1-11
• /
• 2008

This paper analyzed the status of contaminated soils in order to manage it efficiently in Incheon using Geographic Information System (GIS) and investigated the concepts and techniques of the GIS and interpolation method. GIS technique is applied to the analysis of soil quality monitoring data. The purposes of this research are to assess the soil contamination of Incheon metropolitan area and to analyze the existing contents of heavy metals (Cd, Cu, As, Hg, Pb, $Cr^{+6}$) and pH in soil. The samples had been collected from year 1998 to year 2002 by the Soil Contamination Monitoring Network. The soil quality monitoring results were imported with the geographical information of the monitoring programs in capital area. It is found that currently available GIS technique has a great extend of potential for soil quality management. From the analysis of soil quality monitoring results, the GIS application demonstrates the poor soil quality in the central capital area and the it is improved as it travels down to the suburb area. Concerning about the data interpolation, the discrepancy caused by applying different method was ignorable, although Kriging method is further developed.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.3
• /
• pp.472-477
• /
• 2013

An internet-based, real-time GPS synchronized wide-area power system frequency monitoring network(FNET) has been monitoring wide-area power system frequency in continuous time in the United States. This paper analyzes the FNET measurement to the verified disturbances in the US eastern interconnected power system and simulates it using the dynamic system model. By comparing the frequency measurements with its simulation results to the same disturbances in detail, this paper finds that the sequence of monitoring points to detect the frequency fluctuation caused by the disturbances is matched well in the measured data and the simulation results. The similarity comparison index is also proposed to quantify the similarity of the compared cases. The dynamic model based simulation result is expected to compensate for the lack of FNET measurement in its applications.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.598-601
• /
• 2007

Urban growth management is essential for sustainable urban growth. Monitoring physical urban built-up area is a task of great significance to manage urban growth. Detecting urbanized area is essential for monitoring urbanized area. Although image classifications using satellite imagery are among the conventional methods for detecting urbanized area, they requires very tedious and hard work, especially if time-series remote sensing data have to be processed. In this paper, we propose an effective urbanized area detecting method based on normalized difference vegetation index (NDVI) and normalized difference built-up index (NDBI). To verify the proposed method, we extract urbanized area using two methods; one is conventional supervised classification method and the other is the proposed method. Experiments shows that two methods are consistent with 98% in 1998, 99.3% in 2000, namely the consistency of two methods is very high. Because the proposed method requires no more process without band operations, it can reduce time and effort. Compared with the supervised classification method, the proposed method using vegetation indices can serve as quick and efficient alternatives for detecting urbanized area.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.32 no.2
• /
• pp.86-101
• /
• 2004

This study was conducted to present the ecological management of Goduk Riverside Restoration Area in Hangang, Seoul by analyzing the change of the vegetation structure. The survey site was classified into three groups. These were the vegetation restoration area, the dry plant area, and the swampy plant area. There were 141 taxa including naturalized plants and 13 species recorded in 2001 and 258 taxa including naturalized plants and 42 species were recorded in 2003 by monitoring. Monitoring results showed that the alien plants such as Humulus japonicus expanded continuously except in the vegetation restoration area. It was found that the growing status of planted shrub plants were poor, and the naturalized plants status was thriving, and the soil environment was bad in the vegetation restoration area. The alien plants such as Humulus japonicus and Aster pilosus dominated continuously in the dry plant area. The swampy native herb plants number was decreased, but the Humulus japonicus community was expanded caused by the soil drying in the swampy plant area. Soil analysis showed that the soil acidity, the available phosphates and the concentration of calcium were highly effected by cultivation. We propose ecological management as follows based on the results of the change of vegetation and soil characteristics. The vegetation restoration area should be managed by visitor's characteristics. Replanting vegetations should be based on soil characteristics. The removal of naturalized plants and established monitoring with plots is also needed. In the dry plant area and the swampy plant area, naturalized plants need to be removed in order to facilitate bio-diversity and monitoring.