• 대한조선학회논문집
• /
• 제49권3호
• /
• pp.254-263
• /
• 2012

The survivability of warship is assessed by susceptibility, vulnerability and recoverability. Essentially, a vulnerability assessment is a measure of the effectiveness of a warship to resist hostile weapon effects. Considering the shot line and its penetration effect on the warship, present study introduces the procedural aspects of vulnerability assessments of warship. Present study also considers the prediction of penetration damage to a target caused by the impact of projectiles. It reflects the interaction between the weapon and the target from a perspective of vulnerable area method and COVART model. The shotline and tracing calculation have been directly integrated into the vulnerability assessment method based on the penetration equation empirically obtained. A simplified geometric description of the desired target and specification of a threat type is incorporated with the penetration effect. This study describes how to expand the vulnerable area assessment method to the penetration effect. Finally, an example shows that the proposed method can provide the vulnerability parameters of the warship or its component under threat being hit through tracing the shotline path thereby enabling the vulnerability calculation. In addition, the proposed procedure enabling the calculation of the component's multi-hit vulnerability introduces a propulsion system in dealing with redundant Non-overlapping components.

• 대기
• /
• 제17권2호
• /
• pp.125-133
• /
• 2007

Cloud amount calculation algorithm was developed using MTSAT-1R satellite data. The cloud amount is retrieved at 5 km ${\times}$ 5 km over the Korean Peninsula and adjacent sea area. The algorithm consists of three steps that are cloud detection, cloud type classification, and cloud amount calculation. At the first step, dynamic thresholds method was applied for detecting cloud pixels. For using objective thresholds in the algorithm, sensitivity test was performed for TBB and Albedo variation with temporal and spatial change. Detected cloud cover was classified into 3 cloud types (low-level cloud, cirrus or uncertain cloud, and cumulonimbus type high-level cloud) in second step. Finally, cloud amount was calculated by the integration method of the steradian angle of each cloud pixel over $3^{\circ}$ elevation. Calculated cloud amount was compared with measured cloud amount with eye at surface observatory for the validation. Bias, RMSE, and correlation coefficient were 0.4, 1.8, and 0.8, respectively. Validation results indicated that calculated cloud amount was a little higher than measured cloud amount but correlation was considerably high. Since calculated cloud amount has 5km ${\times}$ 5km resolution over Korean Peninsula and adjacent sea area, the satellite-driven cloud amount could show the possibility which overcomes the temporal and spatial limitation of measured cloud amount with eye at surface observatory.

• 융합정보논문지
• /
• 제10권10호
• /
• pp.135-142
• /
• 2020

최근 농업분야에서는 드론의 보급으로 인하여 노령화를 해결하기 위한 4차 산업 혁명의 중요 기술로 분류되고 있다. 특히, 초경량비행장치 멀티콥터의 국가 자격증을 취득하고자하는 연령대가 다양하고 취득 후 수익 활동을 위한 분야로는 드론을 활용한 영상 촬영 및 방제가 대표적이다. 그러나 드론을 활용한 방제기술은 조종자의 조종 기술의 의존도가 높아 조종 숙련에 따라 살포효과의 차이가 발생한다. 이를 보완한다면 농업의 방제분야의 활용도가 다양해 질 것으로 기대된다. 대표적인 보완 기술은 농업용 방제드론의 기체 특성을 고려한 정확한 방제면적이 산출이다. 본 논문에서는 농업용 방제드론의 살포 특성 분석을 위하여 유효살포시간, 유효살포간격을 정식화하고 방제드론 종류에 따른 정확한 방제면적 산출이 가능한 알고리즘을 제안한다. 추후 본 알고리즘을 기반으로 드론방제사의 비행 방식에 따른 비산 문제를 개선하고 최적의 방제 매뉴얼을 구축하여 방제 현장에 활용하고자 한다.

• 한국수학교육학회지시리즈A:수학교육
• /
• 제29권1호
• /
• pp.21-34
• /
• 1990

This is a study on an instruction of estimation for error correction in the calculation with a computer or a calculator. The aim of this study is to survey a new aspect of calaulation teaching and the teaching strategy of estimation and finally to frame a new curriculum model of estimation instruction. This research required a year and the outcomes of the research can be listed as follows: 1. Social utilities of estimation were made clear, and a new trend of calculation teaching related to estimation instruction was shown. 2. The definition of estimation was given and actual examples of conducting an estimation among pupils in lower grades were given for them to have abundant experiences. 3. The ways of finding estimating values in fraction and decimal fraction were presented for the pupils to be able to conduct an estimation. 4. The following contents were given as a basic strategy for estimation. 1) Front-end strategy 2) Clustering strategy 3) Rounding strategy 4) Compatible numbers strategy 5) Special numbers strategy 5. In an instuction of estimation the meaning, method. and process of calculation and calculating algorithm were reviewed for the cultivation of children's creativity through promoting their basic skill, mathematical thinking and problem-solving ability. 6. The following contents were also covered as an estimation strategy for measurement 1) Calculating the sense of quantity on the size of unit. 2) Estimating the total quantity by frequent repetition of unit quantity. 3) Estimating the length and the volume by weighing. 4) Estimating unknown quantity based on the quatity already known. 5) Estimating the area by means of equivalent area transformation. 7. The ways of instructing mental computation were presented. 8. Reviews were made on the curricular and the textbook contents concerning estimation instructions both in Korea and Japan. and a new model of curriculum was devised with reference to estimation instruction data of the United States.

• 대한조선학회논문집
• /
• 제46권1호
• /
• pp.78-86
• /
• 2009

A capacity calculation and process analysis is a very important part for the entire ship production planning. Ship's production plan is set up with a concept that the product is produced based on the capacity achievable by the processes while general manufacturing sets up the production plan based on product lead-time. Therefore, in case the calculation of capacity for each process of shipbuilding yard is different from actual conditions, a series of production plan - ship table composition, dual schedule plan and execution schedule plan, etc - may accumulate errors, lose reliability of planning information and cause heavy cost deficit in this course. In particular, in case of new shipbuilding yard, stocks between processes are built up and half blocks are not supplied in timely manner, and that is sometimes due to the clumsiness of the operator but it is more often because of the capacity to execute each process is not logically calculated. Therefore, this paper presents the process to calculate the assembly leadtime and assembly process capacity for shipbuilding yard assembly factory. This paper calculated the block type for calculation of assembly lead time based on block DAP(detailed assembly procedure), and introduced cases that calculate production capacities by assembly surface plate by considering the surface plate occupied area of the blocks that change depending on assembly field area and assembly processes through assembly simulation.

• 한국항해항만학회지
• /
• 제33권1호
• /
• pp.65-70
• /
• 2009

대수심의 유체운동을 포텐셜 운동으로 가정하여 자유수면의 거동을 신속히 해석하는 BEM 해석법과 구조물 근방에서 유체의 자유 수면 변화를 계산하기 위하여 NS방정식의 해석으로 CADMAS-SURF 기법을 결합하여 하이브리드 수치기법을 개발하였다. 하이브리드 해석법에서는 반사파를 고려해야 할 넓은 영역에서, 대수심의 영역은 BEM이, 천수역은 CADMAS-SURF가 계산하게 된다. 특히, 하이브리드 모델은 장시간에 걸친 불규칙파의 운동에 대해서는 단독의 CADMAS-SURF을 이용한 계산에 비해 거의 동일한 정확도로 월등히 신속하게 계산할 수 있다. 본 연구에서는 완경사 해저면을 가진 넓은 해역에서, 호안구조물에 내습하는 파랑의 처오름과 월파와 같은 강비선형 파랑장 계산에 결합해석모델을 적용하였다. 계산결과는 각각 토요시마(풍도(豊島))의 규칙과 처오름 실험과 고다(합전(合田))가 제안한 불규칙파의 월파량 산정도와 비교하였다.

• 문화기술의 융합
• /
• 제9권6호
• /
• pp.1049-1055
• /
• 2023

농업용 드론을 이용한 방제 작업의 경우 그 경제적 효율성으로 인해 활용도가 증가하고 있으나, 작업자의 숙련도에 따라 효과의 차이가 발생한다. 이에 본 연구에서는 스마트 운영 모드를 적용하여, 수동 비행 모드에서 제어의 단점을 보완하고 이에 대한 수치적 모델을 제안하고, 선행 연구와 비교 검증을 통해 실험적 검증을 수행하였다. 그 결과 농업용 방제 드론들의 분사 시간 및 방제면적을 도출하였고, 수치적 모델과 유사성이 높은 방제용 드론을 선정하여 실험적으로 검증하였다. 이를 통해 수동 비행 모드보다 스마트 운영 모드 적용 시 살포 면적 및 작업(살포 균일도 및 작업 효율)이 상대적으로 효과적인 것을 확인하였다.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2007년도 춘계학술발표회 논문집
• /
• pp.111-114
• /
• 2007

One of future remote sensing techniques for the estimation of damage by storm and flood is the extraction of water area, which could be the basis of measuring the damage by storm and flood and estimate restoration cost. This paper introduces an approach to damage estimation using satellite Image. The project site was Ansung area and a set of Radarsat-1 SAR image at 6.25m resolution was used for the test. Authors investigated methods of SAR image processing such as shadow-effect removal, orthorectification of SAR image and calculation of damage area by flood. Consequetly, this study showed that technique improvement of image processing and the best of result for extracting water area. Also, found the new possibility of damage estimation using satellite image.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.116-119
• /
• 2004

The use of higher strength materials frequently requires the change of design provisions. Following to the previous researches, high strength reinforcing bars have a weak point about the development and splice length. Based on the previous research about high relative rib area, bond strength between reinforcing bars and concrete can be improved by the control of rib height and spacing. But, the code provisions do not include these specific shape of reinforcing bars. So, the purpose of this paper is to determine the effect of relative rib area to the bond strength. This paper describes the experiment and analysis of 5 beam-spliced specimens containing D25 with relative rib areas ranging from 0.073 to 0.17. The test results are also analyzed to make a design formula about the calculation of splice length on the consideration of relative rib area.

• Transactions on Electrical and Electronic Materials
• /
• 제12권5호
• /
• pp.204-208
• /
• 2011

In this paper, the design area of a fabricated solar cell has been analyzed with respect to its charge density. The mathematical calculation used for charge-density derivation was obtained from the 2001 version of a MATHCAD program. The parameter range for the calculations was ${\pm}1{\times}10^{17}cm^{-3}$, which is in the normal parameter range for n-type doping impurities ($7.0{\times}10^{17}cm^{-3}$) and also for p-type impurities ($4.0{\times}10^{17}cm^{-3}$). Therefore, it can be said that the fabricated solar-cell design area has a direct effect on charge-density changes.