• Computers and Concrete
• /
• v.17 no.2
• /
• pp.157-172
• /
• 2016

This paper presents a Strut-and-Tie Model for reinforced concrete (RC) columns subject to lateral loading. The proposed model is based on the loading path for the post-yield state, and the geometries of struts and tie are determined by the stress field of post-yield state. The analysis procedure of the Strut-and-Tie Model is that 1) the shear force and displacement at the initial yield state are calculated and 2) the relationship between the additional shear force and the deformation is determined by modifying the geometry of the longitudinal strut until the ultimate limit state. To validate the developed model, the ultimate strength and associated deformation obtained by experimental results are compared with the values predicted by the model. Good agreements between the proposed model and the experimental data are observed.

• Journal of Ocean Engineering and Technology
• /
• v.2 no.1
• /
• pp.36-45
• /
• 1988

해양에서 바람에 의해 생성된 파도를 예측하는 모델을 제시하고 이 모델에 대한 개략적인 설명과 아울러 분류에 의한 기존 모델들을 소개하고 마지막으로 이 모델을 유한폭의 해양에 대하여 적용한 결과를 기존의 다른 모델들과 비교하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.8
• /
• pp.136-142
• /
• 2004

This paper deals with the design and implementation of an open architecture CNC system for Wire-EDM, with a consideration of the difference between Wire-EDM and NC cutting machines. Recent open architecture controller(OAC) related research results could be applied to directly access Wire-EDM systems at the CNC level. However, previous research about OAC is mostly aimed at NC cutting machines such as milling or lathes, and hence these results are inadequate to apply to Wire-EDM. To close the gap between previous general research on OAC and Wire-EDM specific needs, an open architecture NC model for Wire-EDM composed of a synchronization kernel and a NC functional module is proposed. Based on the control information flow and Wire-EDM specific machining process, the conceptual CNC model and the detailed implementation model for Wire-EDM is suggested.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.393-397
• /
• 2001

This paper addresses an Intelligent Agent-based Open Architecture Cell Controller for Intelligent Manufacturing System(IMS). With an Intelligent Agent approach, the IMS will be a independent, autonomous, distributed system and achieve a adaptability to change of manufacturing environment. As the development methodology of Open Architecture Cell Controller, an object-oriented modeling technique is employed for building models associated with IMS operation, such as resource model, product model, and control model. Intelligent Agent-based Open Architecture Cell Controller consists of two kinds of dependant agents, that are the active agent and the coordinator agent. The Active agent is contributed to control components of IMS in real-time. The coordinator agent has great role in scheduling and planning of IMS. It communicates with other active agents to get information about status on system and generates the next optimal task through the making-decision logic and dispatch it to other active agent.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.4
• /
• pp.611-617
• /
• 2008

In ubiquitous environments, the content adaptable services can be dynamically provided to adapt the frequent changes of contexts. These services have common things that the kinds of context factors are limited to ubiquitous environment, though the contexts are flexible. To reuse service architecture can be reasonable for effective adaptable service. In this paper, we design a software architecture with product line techniques for content adaptable applications in ubiquitous environment. Description of product line is to define variation points and their variants, to find out the dependencies between them and to keep the model based architecture, their alternatives.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.5 no.2
• /
• pp.199-209
• /
• 2013

This paper presents the model test results of 3 new spar platforms which were developed based on the OC3-Hywind spar to support a 5-MW wind turbine. By changing the shape but keeping both volume and mass of OC3-Hywind spar platform, those platforms were expected to experience different hydrodynamic and hydrostatic loads. The scale models were built with a 1/128 scale ratio. The model tests were carried out in waves, including both rotating rotor effect and mean wind speed. The characteristic motions of the 3 new models were measured; Response Amplitude Operators (RAO) and significant motions were calculated and compared with those of OC3-Hywind.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.1007-1013
• /
• 2008

In this study, a series of scaled model test were carried out in order to find factors that influence the ultimate load of underreamed anchors. Model anchors were made of arcril and 3cm in diameter. Series of tests were performed with various conditions such as density of soil, diameter of bulb, and number of bulb. Type of soil was Jumunjin sand and relative density varied 40%, 60%, 80%.

• Advances in materials Research
• /
• v.3 no.1
• /
• pp.237-257
• /
• 2014

In this paper, we adopted a two-dimensional analytical electro-elastic model to predict the stress distributions of the piezoelectric actuator in 3D case. The actuator was embedded in an elastic host structure under electrical loadings. The problem is reduced to the solution of singular integral equations of the first kind. The interfacial stresses and the axial normal stress in both plane stress state and plane strain state were obtained to study the actuation effects being transferred from the actuator to the host. The stress distributions of the PZT actuator in different length and different thickness were analyzed to guarantee the generality. The validity of the present model has been demonstrated by application of specific examples and comparisons with the corresponding results obtained from the Finite Element Method.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.6 no.1
• /
• pp.1-13
• /
• 2014

A new 5-MW floating offshore wind turbine moored by a spring-tensioned-leg was proposed for installation in about 50m water depth. Its substructure is a platform of the inverted conical cylinder type with massive ballast weight plate at the bottom. A 1:128 scale model was built for the preliminary engineering development. The model tests in waves and wind were carried out to estimate motion characteristics of this platform in the Ocean Engineering Wide Tank of the University of Ulsan. Its motions were measured and the RAOs were compared. The proposed floating offshore wind turbine showed a good stability and decent responses in waves, wind and operation of the wind turbine.

• The Journal of Society for e-Business Studies
• /
• v.10 no.2
• /
• pp.21-41
• /
• 2005

An Enterprise Architecture (EA) Framework is a tool which supports implementation of the Enterprise architecture that is used to enhance the interoperability of the IT components. In this paper, we propose a framework named as ENAE (ENterprise Architecture Framework) which combines enterprise architecture unit (AU), reference model, and association relationship between domain model. Architecture Unit is defined as a minimum set of a business process and its associated components such as application system and technical components. An EA can be designed and implemented by the aggregating the related AUs including association relationship between Architecture Units. Because UML model has limitations to describe business domain semantics because it is designed for general purpose, we adapt the DSM (Domain Specific Modeling) concept. We describe association relationship between Architecture Units designed by Domain Specific Modeling through Topic Map. Session 2 describes related works about Enterprise Architecture frameworks, Domain Specific Modeling, and Topic Map, while Session 3 explains components of the ENAF. Finally Session 4 shows the case study for implementation of the new Framework called ENAF.