• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.11
• /
• pp.5284-5289
• /
• 2011

This study focused to evaluate thermal transmittance(U-value) performance of sliding type of aluminum alloy window frame(AAWF) with double glazing(DG) and glazing spacer and that without thermal breaker in winter and summer season by two dimensional steady state heat transfer analysis. The AAWE was installed to an existing educational facilities in Seosan area which is the southern region of the Korean Peninsula. Analysis of 2D steady-state heat transfer was performed through the use of BISCO as calculation and simulation program. U-value and temperature factors were calculated. The results are as followed. First, the isotherm simulation shows that AAWF with double glazing have serious differences from recently proposed window thermal performance standards such as Insulation Performance of Windows and Doors of Building Energy Saving Design Standards and the results of calculation of thermal transmittance performance of AAWF and DG are U=9.631 W/$m^2K$, U=2.382 W/$m^2K$ respectively during winter and summer season. Second, the results of analysis of heat transfer analysis, calculated by simulation, shows that 225% of heat is lost comparing with thermal performance standards U=4.0 W/$m^2K$ of general double glazing among those standards on AAWF without thermal breaker.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.4
• /
• pp.83-91
• /
• 2021

In this study, to improve the connection performance between the existing reinforced concrete (R/C) frame and the strengthening member, we proposed a new H-section steel frame with elastic pad (HSFEP) system for seismic rehabilitation of existing medium-to-low-rise reinforced concrete (R/C) buildings. This HSFEP strengthening system exhibits an excellent connection performance because an elastic pad is installed between the existing structure and reinforcing frame. The method shows a strength design approach implemented via retrofitting, to easily increase the ultimate lateral load capacity of R/C buildings lacking seismic data, which exhibit shear failure mechanism. Two full-size two-story R/C frame specimens were designed based on an existing R/C building in Korea lacking seismic data, and then strengthened using the HSFEP system; thus, one control specimen and one specimen strengthened with the HSFEP system were used. Pseudodynamic tests were conducted to verify the effects of seismic retrofitting, and the earthquake response behavior with use of the proposed method, in terms of the maximum response strength, response displacement, and degree of earthquake damage compared with the control R/C frame. Test results revealed that the proposed HSFEP strengthening method, internally applied to the R/C frame, effectively increased the lateral ultimate strength, resulting in reduced response displacement of R/C structures under large scale earthquake conditions.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.5
• /
• pp.60-67
• /
• 2021

According to the 「Guidelines of Structural Design for Piloti Building」 of the Ministry of Land, Infrastructure and Transport (2018), the natural period of middle and low rise building of upper-walled lower frame type, such as the domestic multiplex house in piloti style, is suggested for safety to apply the existing code formula of the wall structure. However, the current code formula of the wall structure was provided based on actual measurement of high-rise wall-type structures that mainly exhibit bending behavior. So it is considered that it is not suitable for a piloti-type house with four stories or less, where the wall behaves in shear. See also Park et al. (2000) confirmed that the effect of the lower frame part is greater than that of the upper wall part in the natural period of complex structures with 10 or more floors through analytical studies. Therefore, in this study, in order to examine the effect of the lower frame on the natural period of the middle and low-rise piloti structure, the estimation of natural period by the finite element analysis, approximation formula and ccurrent code formula was performed for the target structures with the shear and flexural stiffness of the upper wall and the shear stiffness of the lower frame as variables. As result, it was found that the change in the shear stiffness of the lower frame had a greater effect on the natural period of the whole building than the change in the bending or shear stiffness of the upper wall.

• Journal of the Korea Convergence Society
• /
• v.10 no.6
• /
• pp.49-58
• /
• 2019

This study aims to analyze the relevance between oral health practices and oral discomforts of the elderly in an urban-rural area by surveying the elderly in welfare centers for the Elderly-continued oral health care program. The result shows that the elderly brush their teeth under regular oral care, and practice oral health life by scaling for the prevention of periodontal disease. Most of the elderly who drink alcohol have experienced implant care and tend to quit drinking after the treatment, and seemed to get their oral discomfort relieved. However, no relevance is found between implant experiences and social discomfort. Furthermore, the elderly who had bad breath expressed pronunciation, taste, pain and chewing discomfort, and social discomfort (P>.05). The educational level of the elderly did not have an impact on oral discomfort, but smoking, chewing and bad breath discomfort seemed to be related to social discomfort(P>.05). Therefore, since oral discomfort of the elderly causes social discomfort which decreases their quality of living, we recommend oral health departments of local governments to help the elderly maintain happy lives by continuing to study the practical use of reducing oral discomfort.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.4
• /
• pp.24-47
• /
• 2013

This study focused on the constructional concepts, landscape design techniques and changes made of the Sandan(山壇) area in the rear garden of Changdeokgung Palace based on the spatial organization of the zone. The results of this study are as below. Constructional layers that have been maintained throughout the centuries from King Injo(仁祖), King Sukjong(肅宗), King Sunjo(純祖), the Japanese colonial period to the present, were found in the Sandan area. The Sandan area, which was developed with the establishment of Chuiseungjeong(取勝亭) during the ruling of King Injo(仁祖), was created as a resting place for the King, and its usage continued until King Sukjong(肅宗) built Nakminjeong(樂民亭). However, the whole area was reorganized to host ritual ceremonies, where ancestral rites were performed for the mountain gods, after Sandan and Baekunsa(白雲社) were built during King Gojong's reign, before the drawing of 'Painting of Eastern Palaces(東闕圖).' The architectural component used then appears to have been designed to serve ancestral ritual formalities for the god of land, or to satisfy the religious desires of the royal family not fulfilled by Confucian courtesy. These are characteristics that define the Sandan area. Meanwhile, the analysis of the ground plan of the Changdeokgung Palace revealed that the Sandan had been maintained until the Japanese colonial era, but was removed sometime after liberation. The area underwent extensive reform in the early 1970s, when the whole area was developed into a tourist destination called Bingcheon(氷泉). Then, a new road that runs through Bingcheon was laid, and the present condition reflects the construction result of the time. An interview with a person who had taken part in the repair work in the 1970s confirmed that the construction work at the time had the goal of establishing two drainage systems for drinking water and copied the Okryuchon(玉流川) well.

• Korean Journal of Heritage: History & Science
• /
• v.43 no.1
• /
• pp.212-235
• /
• 2010

The purpose of this study is to examine the characteristics of the location and the spatial composition of Uireung that is located in Seokgwan-dong, Seongbuk-gu, Seoul, in order to understand the landscape architectural characteristics. The results are as follows. First, Uireung is 6.4km from Changdeokgung Palace and 5.5km from Heunginjimun Gate. It did not violate the distance standard (40km) for the royal tombs according to Joseon Dynasty Neung-won Myo-je. Second, Uireung is in harmony with the nature and shows the authoritative characteristics of the royal authority through the spatial composition and rank(Entrance Area, Ceremonial Area, Burial Area). Third, there are burial mound, stone sheep, stone tiger, stone table, stone watch pillars in the upper platform, and stone civil official, stone horse, stone lantern in the middle platform, and stone military official, stone horse in the lower platform, and T-shape shrine, worship road in the ceremonial area. There is no pond and a tomb keeper residence, but the position, size, and form can be approximated through historical research materials. There are a colony of pine trees around the burial mound and 64 species of trees such as pine tree, zelcova tree, and fir tree below the burial mound.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.6
• /
• pp.226-234
• /
• 2021

The objective of this study is to establish the fundamental design data for axial load-displacement relationship under axial monotonic or cyclic responses of seismic damping·isolation (SDI) units developed for ceiling structures. The main parameters include the installation of a spring, the number of rubber layer, prestress stress of bolts for connector between the spring and rubbers, and loading type. Test results showed that SDI units with a spring in the core and higher prestress stress of bolts tended to be higher stiffness at the ascending branch and more ductile behavior at the descending branch. This trends more notable for the specimens under monotonic load rather than cyclic loads. Consequently, the energy dissipation of SDI unit can be optimally designed with the following conditions: installation of a spring within 3-layer rubbers and prestress applied to the bolts at 10% of their yielding strength . When compared with the experimental tension capacity of the developed SDI units, the predictions by JIS B 2704-1 and KDS 31 00 are conservative under monotonic loading but higher by approximately 10% under cyclic loading.

• Journal of Convergence for Information Technology
• /
• v.12 no.5
• /
• pp.159-167
• /
• 2022

At the present time, no systematic review has been conducted to report the project's outcomes or trends. This study systematically reviewed existing evidence related with community care pilot project. A total of 61 articles, including 18 original literatures and 43 review literatures were finally selected. For original literatures, the most frequent literatures focused on demand surveys (n=4) and model proposals (n=4), the utilization of touchpoint (n=3), space design and architectural model (n=3), manpower training and role establishment (n=2), followed by prioritizing objectives (n=1) and research trend study (n=1). For review literatures, the most frequent literature focused on the elderly (n=12) and relatively few literature on the disabled and mental illness (n=2). Since the pilot project for community care has been implemented for only about one year, the present study indicates that more future research is needed to the disabled, mental illness, and homeless should be conducted as well as elderly.

• Journal of the Korea Institute of Building Construction
• /
• v.21 no.3
• /
• pp.203-211
• /
• 2021

Recently, the insulaton design standards for reducing the energy use of buildings have been strengthened. Althoug insulation work is the most cost-effective method for reducing the primary energy consumption per unit area of a building, there are no evaluation criteria for insulation performance at the time of construction and completion inspection. The purpose of this study is to provide objective data by establishing a standard for an analysis method and a method for easily experimenting with the exterior wall thermal transmittance of an apartment house using a thermal transmittance measuring device(TESTO 435). For the exterior wall of the test subject, the specific heat per unit area exceeded 20kJ/(m²·K), and the data at the end point suitable for ISO 9869-1 were analyzed by the average method. The measured values of the thermal transmittance for 3 consecutive days converged within +5% of the desing value, and the standard deviation of the thermal transmittance by day decreased in the order of 1-Day > 3-Day > 2-Day. The standard deviation of the thermal transmittance by time period decreased in the order of 00:00~24:00 < 19:00~07:00 < 00:00~07:00. The measured value of the thermal transmittance for the time perion of 00:00 to 07:00 per day almost coincided with an error of -3% to + 2% compare to the desing value.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.6
• /
• pp.262-269
• /
• 2021

This paper conducts an evaluation of the structural performance of the lap splice detail of SD700 headed bar experiment for developing an RC beam with different depths joint details. The experiment variable is lap splice length, yield strength, and end anchorage of main reinforcements. For all specimens, a headed bar was applied to the main reinforcement of the beam with low depth (B2), and the beam with high depth (B1) was applied to the main reinforcement with two splice methods: straight headed bar and 90° hooked-headed bar. The experimental results were that specimens of applying SD500 and SD600 had the results of flexural fracture at the lap splice location, which maximum load was similar. For specimens of appling SD500, the 90° hooked-headed bar of B1, suppressed horizontal cracks in the lap splice section compared to the straight headed bar. Specimens of applying an SD 700 headed bar had the results of brittle anchorage failure. In addition, maximum load was increased with the lap splice length increasing. For specimens of applying SD700 headed bar, test for test maximum load/theoretical load for test development length/design development length were estimated to be 1.30~1.48 for the ACI 318-19 equation, and 1.14~1.30 for the KDS-2021 equation. Thus, ACI 318-19 equation had conservatively greater safety factors as estimated development lengththened.