• 한국공간구조학회논문집
• /
• 제16권4호
• /
• pp.75-82
• /
• 2016

Building hardware joints are welded in most cases, which have risks of fire and explosion. Besides, the secondary damage of the destruction of the welded parts can be caused by the horizontal displacement of the structure due to earthquake or wind load. This paper compared the horizontal displacement following abilities of welded building hardware and non-welded building hardware. To do this, We conducted actual formation shake table test, and checked on the horizontal displacement following ability of structure by comparing their responses to earthquake load. We made the 2m-high framework to examine the responses of the actually constructed building hardwares, and analyzed the displacement responses of the welded-typed, non-welded-typed, and cruciform bracket building hardwares. We conducted the test by increasing acceleration rate until displacement reached 40mm corresponding to allowable relative story displacement II. The result of the test showed that the building hardware using welding work made cracking and breakage on welded connections of welded building hardware, but non-welded building hardware with no use of welding work and cruciform bracket building hardware make no problem, and that non-welded building hardware is superior to that of the welded building hardware in the horizontal displacement following ability due to earthquake or wind load.

• 대한토목학회논문집
• /
• 제10권3호
• /
• pp.7-17
• /
• 1990

본 연구에서는 트러스구조와 아치구조의 부재단면적 및 기하형상을 동시에 최적화하는 효율적인 근사화 방법을 제안하고자 한다. 설계과정 중, 트러스구조에 대해서는 응력제약조건 및 좌굴응력제약조건을 만족하도록 하고, 아치구조에 대해서는 조합응력 제약조건을 만족하도록 하였다. 최적화에 필요한 구조해석의 수를 줄이기 위해 Force Approximation Method를 사용하였다. 초기치에 대한 유한요소해석이 수행된 다음 설계변수인 부재단면적과 절점좌표들에 대한 부재단면력들의 경사를 계산하였고, 그 경사정보를 이용 부재단면력들의 1차 Taylor급수 전개에 근거를 둔 근사구조 해석을 형성하였다. 이동한계법을 적용하였으며, 근사구조해석으로 부터 얻어진 정보에 의해 구조물의 체적을 최소화 하였다. 형상최적화를 위한 제안된 본 방법의 효율성과 신뢰성을 보이기 위해 수치예를 들어 다른 방법들에 의한 결과와 비교하였다. 그 결과 구조해석의 수를 크게 감소시킬 수 있었으며, 구조물 형상최적화에 매우 효율적으로 적용될 수 있음을 알게 되었다.

• Structural Engineering and Mechanics
• /
• 제52권2호
• /
• pp.239-260
• /
• 2014

Non-stationary random vibration of linear structures with uncertain parameters is investigated in this paper. A time-domain explicit formulation method is first presented for dynamic response analysis of deterministic structures subjected to non-stationary random excitations. The method is then employed to predict the random responses of a structure with given values of structural parameters, which are used to fit the conditional expectations of responses with relation to the structural random parameters by the response surface technique. Based on the total expectation theorem, the known conditional expectations are averaged to yield the random responses of stochastic structures as the total expectations. A numerical example involving a frame structure is investigated to illustrate the effectiveness of the present approach by comparison with the power spectrum method and the Monte Carlo simulation method. The proposed method is also applied to non-stationary random seismic analysis of a practical arch bridge with structural uncertainties, indicating the feasibility of the present approach for analysis of complex structures.

• 터널과지하공간
• /
• 제7권3호
• /
• pp.208-220
• /
• 1997

To asses the stability of structure around shaft during the excavation of -300 ml hopper room at 2nd shaft in Jangsung mine, some measurements were made with blast monitoring, stressmeter, extensometer and inclinometers. Instrumentations proved to be reliable and data were montiored over six month period. Stressmeters were set at the points of wall and arch of inset gang(level). Induced stresses were measured with the magnitude of 2.81 kgf/$\textrm{cm}^2$(tensile stress) and -4.45kgf/$\textrm{cm}^2$(compressive stress) respectively. These values were converged after two months. The magnitude of axial force in rock bolt was measured with 1.98 ton between the points of M2(2.25m) and M3(1.5 m) but this value was assumed within allowable level. Maximum displacement was also measured with 2 mm at the dephs of 12m from surface. But this value belongs within guide level.

• Steel and Composite Structures
• /
• 제7권6호
• /
• pp.421-440
• /
• 2007

An optimal design method in cooperated with nonlinear inelastic analysis is presented. The proposed nonlinear inelastic method overcomes the difficulties due to incompatibility between the elastic global analysis and the limit state member design in the conventional LRFD method. The genetic algorithm used is a procedure based on Darwinian notions of survival of the fittest, where selection, crossover, and mutation operators are used to look for high performance ones among sections in the database. They are satisfied with the constraint functions and give the lightest weight to the structure. The objective function taken is the total weight of the steel structure and the constraint functions are load-carrying capacity, serviceability, and ductility requirement. Case studies of a planar portal frame, a space two-story frame, and a three-dimensional steel arch bridge are presented.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 가을 학술발표회 논문집
• /
• pp.145-152
• /
• 2003

An optimal design method in cooperated with nonlinear inelastic analysis method is presented. The proposed nonlinear inelastic method overcomes the difficulties due to incompatibility between the elastic global analysis and the limit state member design in the conventional LRFD method. The genetic algorithm uses a procedure based on Darwinian notions of survival of the fittest, where selection, crossover, and mutation operators are used among sections in the database to look for high performance ones. They satisfy the constraint functions and give the lightest weight to the structure. The objective function is set to the total weight of the steel structure and the constraint functions are load-carrying capacities, serviceability, and ductility requirement. Case studies of a three-dimensional frame and a three-dimensional steel arch bridge are presented.

• Structural Engineering and Mechanics
• /
• 제17권5호
• /
• pp.707-725
• /
• 2004

An optimal design method with nonlinear elastic analysis is presented. The proposed nonlinear elastic method overcomes the drawback of the conventional LRFD method that accounts for nonlinear effect by using the moment amplification factors of $B_1$ and $B_2$. The genetic algorithm used is a procedure based on Darwinian notions of survival of the fittest, where selection, crossover, and mutation operators are employed to look for high performance ones among sections in the database. They are satisfied with the constraint functions and give the lightest weight to the structure. The objective function taken is the total weight of the steel structure and the constraint functions are strength, serviceability, and ductility requirement. Case studies of a planar portal frame, a space two-story frame, and a three-dimensional steel arch bridge are presented.

• 한국건축시공학회지
• /
• 제14권6호
• /
• pp.615-621
• /
• 2014

본 연구는 수치해석과 폭발 실증시험을 통해 조립식 PC 아치 탄약고의 설계 및 시공도면을 제시하였다. 제안된 탄약고의 방호성능은 미군의 UFC 3-340-02와 한국군의 국방 군사시설 설계기준(탄약고 설계지침)에서 제시된 최대 회전각도로 판별하였다. 아치형 탄약고의 기초설계를 위해 곡면형태인 반원형과 오발형에 대하여 폭발하중에 대한 방호성능을 수치해석을 통해 살펴본 결과 오발형이 타원형에 비하여 지점회전각이 적어 전반적으로 방호성능이 뛰어남을 확일 할 수 있었다. 이를 통해 아치형 조립식 PC 탄약고의 설계안 및 시공도를 제안하였으며, TNT 133.75kg을 구조체 벽체로부터 00m 이격하여 폭발시켜 실제 시공된 탄약고에 대한 방호성능을 검증하였다. 결론적으로, 본 연구에서 제안된 탄약고는 충분한 방호 여유력을 확보하고 있는 것으로 확인할 수 있었다. 향후 이러한 방호 여유력을 고려하여 재료의 절감을 통한 보다 경제적인 탄약고 설계도 가능할 것으로 사료된다.

• 한국농촌건축학회논문집
• /
• 제12권1호
• /
• pp.49-56
• /
• 2010

This paper is aimed to clarify field technique of non-educated constructors in timber structure of korean-style secondary station(Gong-So) on the annex of catholic church. The main object of this study is Sin-Sung and Su-Bun secondary stations which post-lintel structure was 2high columns(Go-Ju) 5beams(Ryang) in Jeon-Buk area of Korea. We reached the following conclusion. Firstly, these secondary stations are required a lots of space for number of persons with the introduction of basilica plane. These plans have different intervals in the layout. Secondly, they constructed the holy space by using high columns(Nae-Jin-Go-Ju). The former problems of plan layout are sloved by reinforcement and replacement eaves and rafter of logitudinal. Thirdly, the elements showed the natural feature such as irregular wooden floor, arch-type head pentrating tie and a ceiling. In the end, we knew that non-educated constructor had found a way in the problem for accepting unreasonable work.

• 한국공간구조학회논문집
• /
• 제19권3호
• /
• pp.69-76
• /
• 2019

A Beam String Structure (BSS) is a type of hybrid structures, which is composed of upper structural members, lower strings, and struts. Due to the advantages that the pre-tensioned strings elicit pre-caber of the upper structural members, the deflection can be greatly reduced without increasing the structural member size. In this study, a two-way beam string structure is proposed to endure bi-directional loading. The two-way beam string structure consists of two cable parts, namely, sagging and arch-shaped cables. A parametric study is presented aimed at proposing design guide lines of the two-way beam string structures. Numerical finite element analyses through the ABAQUS package were implemented to obtain their behaviors.