• 대한수학회지
• /
• 제58권4호
• /
• pp.967-976
• /
• 2021

We obtain the list of prime knots with arc index 12 up to 16 crossings and their minimal grid diagrams. This is a continuation of the works [5] and [8] in which Cromwell matrices were generated to obtain minimal grid diagrams of all prime knots up to arc index 11. We provide minimal grid diagrams of the prime alternating knots with arc index 12. They are the 10 crossing prime alternating knots. The full list of 19,513 prime knots of arc index 12 up to 16 crossings and their minimal grid diagrams can be found in the arXiv [6].

• 한국지리정보학회지
• /
• 제3권2호
• /
• pp.1-10
• /
• 2000

본 연구의 목적은 도시내 필지 단위의 지가산정과 그 결과의 시각적 표현을 위한 자동화 시스템을 개발하는 것이다. 현재 필지별 공시지가는 건교부의 ALPAS 프로그램으로 매년 산정 되지만, 시스템이 매우 번잡하고, 도시공간분석과 도시계획을 지원하는 기능을 제공하지 못해 개선되어야 한다. 따라서 본 연구는 지가계산을 위해 뉴럴네트워크(Neural Network)이론을 도입하였으며, Matlab 4.0 어플리케이션으로 계산 프로그램을 작성하였다. 계산 결과의 공간표현을 위해 ArcView GIS를 도입하였으며, 두 어플리케이션의 통합은 DDE(Dynamic Data Exchange)방식으로 통합하였다. 이는 Matlab을 서버로 설정하고, ArcView를 클라이언트로 설정함으로써 가능하였다. 사례연구는 진주시를 대상으로 하였으며, ArcView창의 메뉴에서 동명을 선택하면, Matlab에서 해당 동의 네트워크 모형을 구축하고, 필지 속성자료로 네트워크를 교육한다. 그 다음 ArcView 창에 고도제한, 미관지구, 도로 및 공원지정에 의한 지가 변동을 시뮬레이션할 수 있도록 버튼을 추가하여, 자동적으로 계산과 결과의 시각화가 가능한 시스템을 구축하였다. 이 시스템은 부수적인 보완을 거친다면, 도시계획을 지원하기 위한 시스템(Planning Support System)으로 활용 가능할 것이다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.96-97
• /
• 2012

In nitride and oxide film deposition, sputtered metals react with nitrogen or oxygen gas in a vacuum chamber to form metal nitride or oxide films on a substrate. The physical properties of sputtered films (metals, oxides, and nitrides) are strongly influenced by magnetron plasma density during the deposition process. Typical target power densities on the magnetron during the deposition process are ~ (5-30) W/cm2, which gives a relatively low plasma density. The main challenge in reactive sputtering is the ability to generate a stable, arc free discharge at high plasma densities. Arcs occur due to formation of an insulating layer on the target surface caused by the re-deposition effect. One current method of generating an arc free discharge is to use the commercially available Pinnacle Plus+ Pulsed DC plasma generator manufactured by Advanced Energy Inc. This plasma generator uses a positive voltage pulse between negative pulses to attract electrons and discharge the target surface, thus preventing arc formation. However, this method can only generate low density plasma and therefore cannot allow full control of film properties. Also, after long runs ~ (1-3) hours, depends on duty cycle the stability of the reactive process is reduced due to increased probability of arc formation. Between 1995 and 1999, a new way of magnetron sputtering called HIPIMS (highly ionized pulse impulse magnetron sputtering) was developed. The main idea of this approach is to apply short ${\sim}(50-100){\mu}s$ high power pulses with a target power densities during the pulse between ~ (1-3) kW/cm2. These high power pulses generate high-density magnetron plasma that can significantly improve and control film properties. From the beginning, HIPIMS method has been applied to reactive sputtering processes for deposition of conductive and nonconductive films. However, commercially available HIPIMS plasma generators have not been able to create a stable, arc-free discharge in most reactive magnetron sputtering processes. HIPIMS plasma generators have been successfully used in reactive sputtering of nitrides for hard coating applications and for Al2O3 films. But until now there has been no HIPIMS data presented on reactive sputtering in cluster tools for semiconductors and MEMs applications. In this presentation, a new method of generating an arc free discharge for reactive HIPIMS using the new Cyprium plasma generator from Zpulser LLC will be introduced. Data (or evidence) will be presented showing that arc formation in reactive HIPIMS can be controlled without applying a positive voltage pulse between high power pulses. Arc-free reactive HIPIMS processes for sputtering AlN, TiO2, TiN and Si3N4 on the Applied Materials ENDURA 200 mm cluster tool will be presented. A direct comparison of the properties of films sputtered with the Advanced Energy Pinnacle Plus + plasma generator and the Zpulser Cyprium plasma generator will be presented.

• Journal of Radiation Protection and Research
• /
• 제30권3호
• /
• pp.121-130
• /
• 2005

고리 원전 주변 지역에서 가상사고 시에 발생하는 핵종 방출 후 토양 또는 농작물에서 시간 경과에 따라 변화하는 핵종 농도분포를 도식적으로 표현하기 위한 GIS를 구축하였다. 이를 위해 ESRI 사의 GIS 구축용 상용 프로그램인 ArcView를 도입하였다. 미리 고리원전 주변의 북서방향 $20km{\times}20km$ 구역에 대한 1:5000 축적의 지도 데이터를 구축하였다. 표현 대상 농작물 및 방출핵종은 주민의 주식인 쌀과 $^{131}I$로 정하였다. 총 100개의 cell에서 $^{131}I$의 침적량으로부터 토양 및 농작물 부분에 대한 $^{131}I$의 시간에 따른 양을 ECOREA-II코드를 통해 계산하였다. 계산결과를 ArcView에서 미리 준비된 polygon cell의 속성 자료에 각각의 cell id와 일치시켜 데이터 병합(join) 작업을 수행하였다. 시간이 경과됨에 따라 낮아지는 $^{131}I$ 농도값을 일관성있는 색상 변화로 나타내기 위해 ArcView의 color lamp에 대한 RGB 값을 조절하였다. 이 방법을 이용하여 고리주변의 북서방향 $10km{\times}10km$ 지역에서 $^{131}I$의 침적 후 쌀에서 시간에 따라 변하는 $^{131}I$ 농도분포를 일관성있는 색상 변화로 쉽게 구분이 되도록 나타낼 수 있었다.

• International Journal of Korean Welding Society
• /
• 제3권1호
• /
• pp.2-7
• /
• 2003

Laser welding application for car body manufacturing has many advantages in the stiffness and the lightness of vehicle, the productivity of assembly line, and the degree of freedom in design. This presentation will express the innovation of car body manufacturing including parameter optimization, process modeling, and system integration. In this application the investment for systems was cut down dramatically by real time switching over the laser path between two welding stations. Points of technical discussion are as follows; optimization of parameters such as laser power, robot speed and trajectory, compact and useful design of jig & fixture to assure welding quality for 3 sheet-layer zinc-coated steel, system integration between 4㎾ Nd:YAG laser device and the other systems, on-line real time welding quality monitoring system, perfect safety standards for high power laser, minimization of consumption costs such as arc lamp, protective glass for optic, etc. This application was successfully launched mass production line in 2001. The laser-welded line of side panel consists of 122 stitches totally. And the length is about 2.4m.

• 디지털산업정보학회논문지
• /
• 제6권4호
• /
• pp.45-56
• /
• 2010

This paper suggests constraint data modeling based on constraint data presentation techniques to perform complex spatial database operation naturally. We were able to identify the limitation of extendibility of dimension and non-equal framework via relevant research for former schema of spatial database and query processing. Therefore we described generalized tuple of spatial data and the definition of suggested constraint data modeling. Also we selected MLPQ/PReSTO tool among constraint database prototype and compare standard functionality of ARC/VIEW. Then we design scenario for spatial operation using MLPQ/PReSTO and we suggested application effect after query processing. Based on above explanation, we were able to identify that we can process spatial data naturally and effectively using simple constraint routine on same framework via constraint data modeling.

• 농촌계획
• /
• 제9권4호
• /
• pp.43-51
• /
• 2003

This study aims to integrate the simulation models for rural settlement planning (SimRusep) in the district level (Myon) area of rural counties. The SimRusep, which has two modules of key villages selection and spatial planning for the selected villages, consists of four sub-models such as the spatial location-allocation model of center villages (SLAMCV), the potential centrality evaluation model (PCEM), the land use planning model (LUPM), and the 3-dimensional spatial planning modeller (3DSPLAM). Basically, map data of the integrated system which can be operated on the UNIX environment is inputted and treated using GIS (ARC/INFO) and then its village planning results is graphically presented on the AutoCAD. In order to verify the practical applicabilities of the SimRusep, an administrative area, Ucheon-myun, HoengSung-gun, KangWon-do, was selected as a case study area. It was well operated in the strategic application trials considering application of each sub-model in the study area. The operation results of the SimRusep showed the possibilities of realtime simulation from the selection of key village to its final stereoscopic presentation of planned results. Alternative village plan proposals can be swiftly drafted, which means very practical support for decision making process and public participation.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.181-186
• /
• 2002

Laser welding application for car body manufacturing has many advantages in the stiffness and the lightness of vehicle, the productivity of assembly line, and the degree of freedom in design. This presentation will express the innovation of car body manufacturing including parameter optimization, process modeling, and system integration. In this application the investment for systems was cut down dramatically by real time switching over the laser path between two welding stations. Points of technical discussion are as follows: optimization of parameters such as laser power, robot speed and trajectory, compact and useful design of jig & fixture to assure welding quality for 3 sheet-layer zinc-coated steel, system integration between 4kW Nd:YAG laser device and the other systems, on-line real time welding quality monitoring system, perfect safety standards for high power laser, minimization of consumption costs such as arc lamp, protective glass for optic, etc. Laser welding has found a place on Hyundai's production plant in conjunction with the startup of mass production of new sports car, and this production system is the result of a collaboration of its engineers. Outer side sheets are joined to inner side sheets by 122 stitch welds totally. And the length is about 2.4meter.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2000년도 Proceedings of 5th International Joint Symposium on Microeletronics and Packaging
• /
• pp.109-109
• /
• 2000

Recently, carbon nanotube has been investigating for field emission display ( (FED) applications due to its high electron emission at relatively low electric field. However, the growing of carbon nanotube generally requires relatively high temperature processing such as arc-discharge (5,000 ~ $20,000^{\circ}C$) and laser evaporation (4,000 ~ $5,000^{\circ}C$) methods. In this presentation, low temperature growing of carbon nanotube by plasma enhanced chemical vapor deposition (PECVD) using nickel catalyst which is compatible to conventional FED processing temperature will be described. Carbon n notubes with average length of 100 run and diameter of 2 ~ $3\mu$ill were successfully grown on silicon substrate with native oxide layer at $550^{\circ}C$using nickel catalyst. The morphology and microstructure of carbon nanotube was highly depended on the processing temperature and nickel layer thickness. No significant carbon nanotube growing was observed with samples deposited on silicon substrates without native oxide layer. This is believed due to the formation of nickel-silicide and this deteriorated the catalytic role of nickel. The formation of nickel-silicide was confirmed by x-ray analysis. The role of native oxide layer and processing parameter dependence on microstructure of low temperature grown carbon nanotube, characterized by SEM, TEM XRD and R없nan spectroscopy, will be presented.

• Structural Engineering and Mechanics
• /
• 제71권6호
• /
• pp.713-738
• /
• 2019

In the paper the dynamics of the oscillating moving load acting in the interior of the hollow cylinder surrounded with elastic medium is studied within the scope of the exact field equations of 3D elastodynamics. It is assumed that the oscillating load act on the certain arc of the internal circle of the cylinder's cross section and this load moves with constant velocity along the cylinder's axis. The corresponding 3D dynamic problem is solved by employing moving coordinate system, the exponential Fourier transform and the presentation these transforms with the Fourier series. The expressions of the transforms are determined analytically, however their originals are found numerically. Under the investigations carried out in the paper the main attention is focused on the so-called "gyroscopic effect", according to which, the influence of the vibration frequency on the values of the critical velocity and interface stresses are determined. Numerical results illustrated this effect are presented and discussed. In particular, it is established how the non-axisymmetricity of the problem acts on the influence of the load oscillation on its critical velocity and on the interface stresses.