• Journal of Radiation Protection and Research
• /
• 제38권4호
• /
• pp.194-201
• /
• 2013

To investigate monitoring unit (MU) efficiency and plan quality of volumetric modulated arc therapy (VMAT) using flattening-filter free (FFF) photon beam in association with target size and location. A virtual patient was generated in Eclipse$^{TM}$ (ver. A10, Varian Medical Systems, Palo Alto, USA) treatment planning system. The length of major and minor axis in axial view was 50 cm and 30 cm, respectively. Cylindrical-shaped targets were generated inside that patient at the center (symmetric target) and in the periphery (asymmetric target, 7.5 cm away from the center of the patient to the right direction) of the virtual patient. The longitudinal length was 10 cm and the diameters were 2, 5, 10 and 15 cm. Total 8 targets were generated. RapidArc$^{TM}$ plans using TrueBeam STx$^{TM}$ were generated for each target. Two full arcs were used and the axis of rotation of the gantry was set to be at the center of the virtual patient. Total MU, homogeneity index (HI), target mean dose, the value of gradient measure and body mean dose were calculated. In the case of symmetric targets, averaged total MU of FFF plan was 23% and 19% higher than that of flattening filter (FF) plan when using 6 MV and 10 MV photons, respectively. The difference of HI, target mean dose, gradient measure and body mean dose between FF and FFF was less than 0.04, 2.6%, 0.1 cm and 2.2%, respectively. For the asymmetric targets, total MU of FFF plan was 21% and 32% was higher than that of FF when using 6 MV and 10 MV photons, respectively. The homogeneity of the target was always worse when using FFF than using FF. The maximum difference of HI was 0.22. The target mean dose of FFF was 3.2% and 4.1% higher than that of FF for the 6 MV and 10 MV, respectively. The difference of gradient measure was less than 0.1 cm. The body mean dose was higher when using FFF than FF about 4.2% and 2.8% for the 6 MV and 10 MV, respectively. No significant differences between VMAT plans of FFF beam and FF beam were observed in terms of quality of treatment plan. The HI was higher when using FFF 10 MV photons for the asymmetric targets. The MU was increased noticeably when using FFF photon beams.

• 대한수학회보
• /
• 제39권1호
• /
• pp.89-95
• /
• 2002

In this paper, we obtain an integral formula relating the measure of great spheres $S^{n-2}$ and arc length of a curve on the unit sphere $S^{n-1$ As an application of the formula, we develop a geometric inequality for a spherical curve and prone generalized version of Fenchel＇s theorem in $S^n$.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2008년도 한국컴퓨터종합학술대회논문집 Vol.35 No.1 (A)
• /
• pp.25-26
• /
• 2008

• 대한수학회논문집
• /
• 제10권1호
• /
• pp.145-153
• /
• 1995

A Jordan domain D in C is said to be a c-quasidisk if there exists a constant $c \geq 1$ such that each two points $z_1$ and $z_2$ in D can be joined by an arc $\tau$ in D such that $$ \ell(\tau) \leq c$\mid$z_1 - z_2$\mid$ $$ and $$ (1.1) min(\ell(\tau_1),\ell(\tau_2)) \leq c d(z, \partial D) $$ for all $z \in \tau$, where $\tau_1$ and $\tau_2$ are the components of $\tau\{z}$. Quasidisks have been extensively studied and can be characterized in many different ways [1],[2],[3].

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2001년도 추계학술대회(제116회) 및 13회 Workshop 제3회 한ㆍ일 치과보존학회 공동학술대회 초록집
• /
• pp.578.1-578
• /
• 2001

The aim of this study was to evaluate the efficiency of the recently introduced light curing units to polymerize a light curing resin composite. Four light curing units XL 3000, Optilux 500 for halogen light source, Apollo 95E for plasma arc and Easy cure for LED (blue-light Emitting Diode) were evaluated. Radiometer was used for measure the light intensity.(omitted)

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.824-828
• /
• 2007

With increasing interest in the reduction of cost for operation and maintenance of overhead catenary system, various methods of condition monitoring have been developed and used in with high-speed analysis and advanced image processing techniques. This study utilizes a high-speed camera as inspecting system to measure the wear, stagger, hight and arc extinguishing test of overhead catenary system. All measuring image were captured by a high speed CMOS camera with PCI express output, which can acquire up to 1000 frames per second with the resolution 1024 × 1280 pixels. Line type laser source with a power equal to 300 mW and the National Instrument LabVIEW (8.0) based on vision acquisition software have been used in application programming interface for image acquisition, display, and storage. The proposed high-speed camera system is finally applied to measure the overhead catenary system showing promising on-field applications

• 한국데이터정보과학회:학술대회논문집
• /
• 한국데이터정보과학회 2006년도 PROCEEDINGS OF JOINT CONFERENCEOF KDISS AND KDAS
• /
• pp.43-47
• /
• 2006

Consider a multitype queue where queued customers arc served in their order of arrival at a rate which depends on the customer type. Here we calculate the sharp asymptotics of the probability the total number of customers in the queue reaches a high level before emptying. The natural state space to describe this queue is a tree whose branches increase in length as the number of customers in the queue grows. Consequently it is difficult to prove a large deviation principle. Moreover, since service rates depend on the customer type the stationary distribution is not of product form so there is no simple expression for the stationary distribution. Instead, we use a change of measure technique which increases the arrival rate of customers and decreases the departure rate thus making large deviations common.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2001년도 춘계종합학술대회
• /
• pp.469-473
• /
• 2001

This paper describes a rotation-type field mill to measure the electric field intensity caused by thunderclouds on the ground level. The field mill developed is consisted of two isolated electrode vanes, a grounded stator and a rotor. To develop a high sensitive field mill, the principles and design rules of a rotation-type field mill are studied. Also, two types of calibration system, such as a cylindrical guard electrodes and a parallel-plate electrodes, are proposed to determine the sensitivity and frequency bandwidth of the field mill. From the calibration experiment, the frequency bandwidth and the sensitivity of the field mill arc DC ∼ 200 [MHz] and 0.267 [mV/Vm], respectively. Therefore, it can measure the electric field intensity from 73[V/m] to 18.7[kV/m].

• 사상체질의학회지
• /
• 제29권4호
• /
• pp.347-368
• /
• 2017

The aim of this study is to investigate the effect of Zizyphus jujuba var. spinosa Composite oil(ZjJ-C_oil) and Aralia cordata var. continentalis Composite oil(ARC-C_oil) to NC/Nga mice induced in Atopic dermatitis-like skin lesions by DNCB. NC/Nga mice which have been induced to Atopic dermatitis-like skin lesions by DNCB are divided into 4 groups, the first is the mice which have been spread with izyphus jujuba var. spinosa Composite oil(ZjJ-C_oil), the second is the mice which have been spread with Aralia cordata var. continentalis Composite oil(ARC-C_oil), the third is which have been spread with dexamethasone (Dexa.) 0.5% on their Atopic lesion, the last is the control group. Then We analyzed skin clinical score, blood sample of each group of measure state of the dorsal skin, the number of immunocytes, and resect the skin lesion to anlayze the state of cells. There are meaningful results of measuring the number of IgE, IL-4, IL-13, $IFN-{\gamma}$, IL-5, the total cells in ALN, dorsal skin, CD4+ Th, CD11b+/Gr-1+ in PBMCs, CD4+ Th, B220+/CD23+ in ALN, $CD4^+$, $CD8^+$ Th in dorsal skin, the level of COX-2, $TNF-{\alpha}$, $TGF-{\beta}1$, IL-4, IL-13 mRNA, the state of the skin lesion and cells in the group with ZjJ-C_oil, ARC-C_oil cream in comprarison with the control group.

• Journal of Audiology & Otology
• /
• 제24권1호
• /
• pp.17-23
• /
• 2020

Background and Objectives: We aimed to measure the head dimensions on computed tomography (CT) images, to compare them to directly measured head dimensions, and to predict a new parameter of bone thickness for aiding bone conduction implant (BCI) placement. Subjects and Methods: We reviewed the facial and mandibular bone CT images of 406 patients. Their head sizes were analyzed using five parameters included in the 6th Size Korea project, and they were divided into age groups (ranging from the 10s to the 80s). We compared the head length, head width, sagittal arc, bitragion arc, and head circumference in the CT and Size Korea groups. We also added the parameter bone thickness for aiding BCI placement. Results: All the head size parameters measured using CT were significantly smaller than those measured directly, with head length showing the smallest difference at 7.85 mm. The differences in the other four parameters between the two groups according to patient age were not statistically significantly different. Bone thickness had the highest value of 4.89±0.93 mm in the 70s and the lowest value of 4.10±0.99 mm in the 10s. Bone thickness also significantly correlated with head width (p=0.038). Conclusions: Our findings suggested that the CT and direct measurements yielded consistent data. Moreover, CT enabled the measurement of bone sizes, including bone thickness, that are impossible to measure directly. CT measurements may complement direct measurements in the Size Korea data when used for developing bone conduction hearing devices (BCIs and headsets) for the Korean population.