• 복식
• /
• 제63권4호
• /
• pp.30-43
• /
• 2013

This study provides suggestions of cultural product design contents by using the cloud-shaped gong in traditional temple culture in order to find a high value-added approach. The research herein is part of cultural design contents projects embedded with the spiritual value and symbolic connotation of temple culture. This would be meaningful to enhance its degree of utilization. This can also be a way to find a strategic alternative to a high value addition of temple stay and dissemination of temple culture. For the research methodology, literature was reviewed over temple stay and Bulgeonsamul. For motive design and development of cultural product design, both Adobe Illustrator CS3 and Adobe Photoshop CS3 were used as computer design program. The template image of cloud-shaped gong for basic motive design was selected from those available at the domestic temples for accurate depiction of its head and body. Finally, samples were adopted from those temples of Gounsa, Songgwangsa, Guinsa, Hwaeomsa, and Naesosa. For each motive, different colors were applied and ten basic motives were practiced in total. By repeating the process for these motives, three types of textile design were prepared. T-shirt designs used a round neckline as basic form, and it was designed for sleeved and sleeveless styles. Apron designs stressed V-neckline and two types were processed: one for the back seam line and the other for side seam line. Pendants were designed with modern and luxurious image so that so that it could be used in various types of accessories. Designs for the bedding applied pattern design of the motives and this was done in a way that gave the images a sense of stability and splendor.

• 한국항해항만학회지
• /
• 제33권8호
• /
• pp.555-562
• /
• 2009

컨테이너 터미널의 주요 생산성 지표는 안벽에서의 작업 효율성이라 할 수 있다. 안벽에서는 Q/C(Quay Crane)이라는 장비가 접안 선박의 컨테이너를 하역한다. Q/C의 작업 생산성을 높이기 위해서는 좀 더 효율적인 Y/T(Yard Tractor)운영 방식이 필요하다. 기존 작업 방식(싱글 사이클)에서는 양하작업 이후 적하 작업이 이루어진다. 듀얼 사이클이란 양하작업과 적하 작업을 동시에 함으로써 안벽 생산성과 야드 트랙터의 이용률을 높이는 방법이다. 터미널에서 듀얼 사이클의 도입은 추가적인 장비의 도입 없이 운영에서의 변화만을 요구한다. 즉, 기존의 dedicate 시스템에서 pooling 시스템으로의 변화가 필요하다. 본 논문에서는 듀얼 사이클을 이용하는 항만에서의 작업 효율성을 증대시키기 위한 선적 계획 방법을 제시하고자 한다. 이 문제를 풀기위해 유전 알고리즘과 타부서치를 제시하였다.

• 한국산학기술학회논문지
• /
• 제19권9호
• /
• pp.124-129
• /
• 2018

본 연구는 Apron의 재질로 이용되고 있는 텅스텐 차폐체를 핵의학과에서 사용하는 선원의 종류와 차폐체의 두께, 선원부터 검출기 사이의 거리를 변화시켜 차폐체에 투과시킨 후 투과선량과 차폐율을 알아보고자 하였다. 실험을 위해서 선원과 차폐체와 검출기를 일직선으로 배치하고 높이 100 cm 지점에서 Inspector로 측정하였다. 그 결과 텅스텐에 차폐효과가 가장 높은 선원은 $^{201}Tl$ 선원으로 측정되었고, $^{123}I$ 선원이 $^{99m}Tc$ 선원보다 차폐효과가 높게 나타났다. 실험에 사용한 선원과 검출기 사이의 거리는 멀어질수록 투과선량은 작아졌고, 텅스텐 차폐체의 두께는 두꺼울수록 차폐율은 높게 측정되었다. 하지만 $^{131}I$와 $^{18}F$ 선원에서는 0.25 mmPb의 차폐체를 사용했을 경우 차폐체가 없을 경우 보다 차폐율이 감소하는 것을 확인하였다. 따라서 $^{13}1I$와 $^{18}F$ 선원을 사용할 경우에는 방사선 차폐효과가 높은 텅스텐일지라도 선원의 종류에 따른 특성과 차폐체의 두께를 고려하여 사용하길 권장하고, 실험 결과를 참고하여 사용한다면 피폭 저 감화방안에 도움을 줄 수 있을 것으로 생각된다.

• 한국의류학회지
• /
• 제28권2호
• /
• pp.292-302
• /
• 2004

The purpose of this study was to evaluate thermal properties of lab gowns developed from the point of safety and work efficiency. We evaluated thermal and subjective responses of subjects wearing functional new lab gowns (Type B, C, D) and a popular lab gown on the market (Type A). Type B was a new lab gown made of woven fabric with functional cuffs. Type C was a new apron made of woven fabric with arm protectors. Type D was a new lab gown made of non-woven material with functional cuffs and openings around the armpits. Temperature in the climatic chamber was set at 19$^{\circ}$C as an indoor temperature in winter and at 24$^{\circ}$C in summer. There were no significant differences in rectal temperature and heart rate among four types of gowns and between two air temperatures for 120 min. Mean skin temperature was much higher in the type A and B than in He type C and D (p .05). In the 19$^{\circ}$C air, clothing microclimate temperature on the back was the highest in the type B and was the lowest in the type C (p .05). Clothing microclimate humidity was not significant differences among gowns. In subjective .esponses, subjects perceived that Type B was the warmest gown in the 19$^{\circ}$C and the hottest and more humid in the 24$^{\circ}$C than other gowns. Inversely, type C was the coolest gown among four gowns. Both in the 19$^{\circ}$C and in the 24$^{\circ}$C, the Type D had gained most responses of being comfortable. In conclusion, the temperature difference of 5$^{\circ}$C was more of an influencing factor than the difference from four types of lab gowns. Secondly, we recommend the manufacturers to make lab gowns with functional cuffs for safety purposes. Thirdly, the spread of the type of apron with arm protector will contribute to increase of the frequency of wearing in summer. Fourthly, it is necessary to study continuously about lab gowns with non-woven materials for researchers exposed to toxic chemical and biological materials.

• 한국생활과학회지
• /
• 제21권6호
• /
• pp.1161-1172
• /
• 2012

The recent trend in tourism souvenirs has shifted from traditional products to modern, practical, and budget oriented products. As a result, tourism souvenirs that meet the changing demands of consumers need to be studied and developed. Aprons are one of the most important accessories worn for housework, and are also an important part of uniforms worn at restaurants and hotels. As a result, aprons typify the characteristics of makgeolli - practical products that meet the needs of modern consumers. Therefore, the development of tourism souvenirs targeting tourists that seek Jeonju Makgeolli is expected to bring substantial social and economic benefits. The purpose of the study is to develop designs for aprons for promotional and tourism souvenirs for the Jeonju Makgeolli Research Center. The research has been conducted with a survey on design preferences of aprons, design proposals, production of actual aprons, and selection of the final design. The study is empirical in nature and realistic in scope since it is anticipated that the trial and manufacture of aprons will be commercialized as tourism souvenirs. It is expected that aprons, which can be produced at low cost, will meet the needs of recent consumers who prefer elegant, modern, and practical goods as compared to simple and bland folk crafts or traditional products. More studies and research on the development of designs of aprons as tourism souvenirs is expected to be conducted based on this study.

• 한국농공학회지
• /
• 제18권4호
• /
• pp.4218-4225
• /
• 1976

To insure the safety of the drainage sluice, topogrophical change due to erosion as well as capability of discharging the design flow in a very important factor. In consideration of the fact that the drainage sluice is built in the sea, its construction has many topographically restricted problems and naturally requires a completeness of research and experiment. This thesis is a comparative and analytic study of discharging flow acting on the erosion at the bottom of the structure on the basis of the measured velocity on the downstream channel of the drainage sluice. (1) The measured velocity shows a little higher values than the computed velocity, because the measured velocity was observed at the surface of the stream. There fore, it is reasonable that the compated velocity should be taken in this study. (2) The field observation was conducted to have the measurement of the flow velocity without surveying the area of flow. Therefore, the coefficient of discharge could not be computed. The survey of the area of flow is planned to be conducted along with the measurement of the flow velocity. (3) The apron of the drainage sluice is free discharging type and it was designed to be about 80m in length less than it should be. (4) The apron of free flow discharging type should have a solid foundation to protect the structure by preventing erosion damage to upstream and downstream channels against weathering of rock and strong torrent. Whether free flow discharging type or energy-dissipating type is best chosen depends on the topographical condition of the forage site, therefore, there would be a comparative study before the final decision was made about the protrection for the structure. (5) It is considered to be appropriate that the design and construction of the drainage sluice should have a complete study which is based on hydraulie model test before the type of protection is decided. (6) It is much requested that a variety of experiment equipments be installed and observed to study the protection for the drainage sluice.

• The Korean Journal of Pain
• /
• 제33권1호
• /
• pp.73-80
• /
• 2020

Background: The aim of this study was to evaluate radiation exposure to the eye and thyroid in pain physicians during the fluoroscopy-guided cervical epidural block (CEB). Methods: Two pain physicians (a fellow and a professor) who regularly performed C-arm fluoroscopy-guided CEBs were included. Seven dosimeters were used to measure radiation exposure, five of which were placed on the physician (forehead, inside and outside of the thyroid protector, and inside and outside of the lead apron) and two were used as controls. Patient age, sex, height, and weight were noted, as were radiation exposure time, absorbed radiation dose, and distance from the X-ray field center to the physician. Results: One hundred CEB procedures using C-arm fluoroscopy were performed on comparable patients. Only the distance from the X-ray field center to the physician was significantly different between the two physicians (fellow: 37.5 ± 2.1 cm, professor: 41.2 ± 3.6 cm, P = 0.03). The use of lead-based protection effectively decreased the absorbed radiation dose by up to 35%. Conclusions: Although there was no difference in radiation exposure between the professor and the fellow, there was a difference in the distance from the X-ray field during the CEBs. Further, radiation exposure can be minimized if proper protection (thyroid protector, leaded apron, and eyewear) is used, even if the distance between the X-ray beam and the pain physician is small. Damage from frequent, low-dose radiation exposure is not yet fully understood. Therefore, safety measures, including lead-based protection, should always be enforced.

• 한국항해항만학회지
• /
• 제44권6호
• /
• pp.557-563
• /
• 2020

디지털 트윈 기술은 다양한 산업에서 적용되고 있으며, 물류 산업에도 큰 영향을 미칠 것으로 예상되지만 컨테이너 터미널에서의 기술 도입은 제한적으로 발전하고 있다. 기존 선행연구를 검토한 결과 컨테이너 터미널을 대상으로 디지털 트윈 기술의 적용에 관한 연구는 미비한 실정이다. 본 연구에서는 컨테이너 터미널에 디지털 트윈 기술 우선 적용 분야를 도출하기 위하여 AHP 분석과 IPA 분석을 실시하였다. IPA 분석을 통해 컨테이너 터미널의 디지털 트윈 기술 적용 분야 세부 요소의 도입 시급성을 분석한 결과 ATC, 지능형 CCTV, 컨테이너 야드가 최우선으로 컨테이너 터미널에 도입이 되어야 할 것으로 판단된다. 다음으로 VR/AR 장비, AYT, 스마트 컨테이너, 컨테이너 자동 순환 시설, 냉동·냉장 컨테이너 야드, 항만용 Wearable 디바이스, 스마트 부표의 순이며, AQC, Berth, AGV, ASC, Apron, 자동 계류기기는 점진적으로 도입이 필요할 것으로 판단된다. 마지막으로 OSS 장비, 인터모달 연계시설, 지능형 드론, 위험물 장치장은 상대적으로 도입 순위에서 후순위에 위치한 것으로 나타났다.

• 미래기술융합논문지
• /
• 제1권2호
• /
• pp.19-25
• /
• 2022

방사선 차폐 물질인 납을 대신하여 싸고 친환경적인 산화철, 알루미나로 차폐체를 제작 후 차폐체의 성능을 평가하고자 한다. 산화철과 알루미나 각각 석고와 혼합하여 차폐체를 제작 이후 X-ray Tube를 이용하여 석고보드, 납복과 비교하여 성능을 평가한다. 관전압에 변화를 주며 실험한 결과 알루미나의 차폐 성능은 석고보드보다 차폐 성능이 떨어졌으며 50%의 알루미나가 함유되었을 때 석고보드와 차폐 성능이 비슷하였다. 산화철은 약 75%가 함유되었을 때 납복의 차폐 성능과 비슷해졌다. 알루미나를 이용한 차폐체는 석고와 비슷한 차폐 성능을 보여줘 납 대체물질로 적합하지는 않다. 하지만 산화철은 납복과 비슷한 차폐 성능을 나타내어 향후 납을 대체하는 X선 차폐 물질로 활용이 가능하기에 추가 연구가 필요하다.

• Journal of Radiation Protection and Research
• /
• 제48권3호
• /
• pp.162-166
• /
• 2023

Background: Assessment of the radiation doses to which workers are exposed can differ depending on the placement of dosimeters on the body. In addition, it is affected by whether the placement is under or over a shielding apron. This study aimed to evaluate the actual positioning of personal dosimeters on the body, with or without shielding aprons, among radiation workers in Korea. Materials and Methods: We analyzed the survey data, which included demographic characteristics, such as sex, age, occupation, work history, and placement of the personal dosimeter being worn, from a cohort study of Korean radiation workers. We assessed the use of personal dosimeters among workers, stratified by sex, age, working period, starting year of work, and occupation. Results and Discussion: Overall, high compliance (89.1% to 99.0%) with the wearing of dosimeters on the chest was observed regardless of workers' characteristics, such as age, sex, occupation, and work history. However, the placement of dosimeters, either under or over the shielding aprons, was inconsistent. Overall, 40.1% of workers wore dosimeters under their aprons, while the others wore dosimeters over their aprons. This inconsistency indicates that radiation doses are possibly measured differently under the same exposure conditions solely owing to variations in the placement of worn dosimeters. Conclusion: Although a lack of uniformity in dosimeter placement when wearing a shielding apron may not cause serious harm in radiation dose management for workers, the development of detailed guidelines for dosimeter placement may improve the accuracy of dose assessment.