• 한국수학교육학회지시리즈E:수학교육논문집
• /
• 제26권1호
• /
• pp.137-154
• /
• 2012

미적분학에서 '근사(approximation)'는 핵심 개념 가운데 하나인데, 이를 설명하기 위한 기본 개념은 '접선(tangent)'이며, 접선은 특별한 조건을 가지는 '직선(line)'이다. 본 연구에서는 미적분학의 이론적 기초가 되는 이들 수학적 지식에 대해 중등학교 기하지도 관점에 기초하여 교수학적 고찰을 하고, 이와 관련하여 개연성 있는 지도를 위한 주안점과 지도 방안을 제안한다. 이를 위해 유클리드 기하학에서의 점, 선, 원, 직선, 접선, 근사에 대해 알아보고, 이를 해석 기하학으로 번역하는 과정을 통해 대수적 조작을 위한 수학적 지식들을 유의미하게 유도한다. 그리고 현대수학의 관점으로 이를 발전시켜 근사를 위한 수학적 지식들의 유선(流線, stream line)을 구성한다. 또한 이를 바탕으로 직선, 접선 그리고 근사에 관한 학교수학의 내용을 고찰하여 지도의 주안점과 지도 방안을 모색한다. 이러한 연구는 교사들에게 교수학적 내용지식을 주며, 이들 수학적 지식을 개연성 있게 지도할 수 있는 수업모델 개발에 대한 기초를 제공한다. 나아가 학생들에게 수학이 계통적 학문이라는 것과 학교수학이 뚜렷한 목적성 아래 구성된 활동이라는 것을 인식하게 한다.

• 한국수학교육학회지시리즈E:수학교육논문집
• /
• 제29권1호
• /
• pp.91-110
• /
• 2015

본 연구는 초등수학 영재교육 대상자들이 원주율 개념에 대해서 어떻게 이해하고 있는지를 살펴보고자 하였다. 이를 위해 원주율 계산 방법의 역사 발달 단계를 토대로 세 가지 과제를 개발한 후 6학년 영재교육 대상자 12명을 대상으로 적용하여 그 반응을 분석하였다. 연구결과, 학생들은 '원주율 = 3.14'라는 사고의 고착화로 인하여 원주율의 개념, 근사성, 무한성을 제대로 이해하지 못하였으며, 원주율과 원주율의 근삿값을 혼동하는 오류를 보였다. 또한 학생들은 원주율을 '(원주) ${\div}$ (지름)'의 대수적인 식으로 이해하려는 성향이 강하였으며, 원주율의 상수성과 무한성을 깊이 있게 이해하고 있는 학생은 극히 적었다. 반면에 과제에 대한 토론 활동은 학생들이 원주율의 근사성에 대한 아이디어를 발견할 수 있는 기회를 제공하였다. 이상의 결과를 종합하여, 초등학교에서의 원주율 지도와 관련하여 원주율을 원의 지름을 단위길이로 원의 둘레를 측정하여 얻을 수 있는 값으로 도입할 것과 공학적 도구 등을 이용하여 직관적인 방법을 통해 이해하도록 할 것, 원주율 개념이 가지는 본질적인 의미를 이해할 수 있도록 다양한 상황을 통해 도입할 것을 제안하였다.

• Communications for Statistical Applications and Methods
• /
• 제3권3호
• /
• pp.263-269
• /
• 1996

The somplest approximate confidence interval for the probability of success is the one based on the normal approximation to the binomial distribution, It is widely used in the introductory teaching, and various guidelines for its use with "large" sample have appeared in the literature. This paper suggests a guideline when to use it as an approximation to the exact confidence interval, and comparisons with existing guidelines are provided. provided.

• 한국수학교육학회지시리즈A:수학교육
• /
• 제59권3호
• /
• pp.271-294
• /
• 2020

본 연구의 목적은 예비교사들이 학생 사고를 도출하는 핵심 교수 관행에 근접하도록 돕는 디지털 시뮬레이션의 활용 가능성을 탐색하는 것이었다. 초등 수학교육 방법론을 수강하는 13명의 예비교사들이 참여한 디지털 시뮬레이션을 분석한 결과, 예비교사들은 일반적인 질문에서 내용-특화된 질문을 제기하였으며, 학생들의 해결전략을 비교하였다. 예비교사들은 다양한 이유로 시뮬레이션의 '일시 정지' 기능을 활용하였다. 예비교사들은 학생-아바타와 실시간으로 상호작용하는데 부담을 느꼈지만, 디지털 시뮬레이션을 진정한 교수 경험으로 파악했으며, 그 유용성을 강조하였다.

• 한국수학교육학회지시리즈A:수학교육
• /
• 제37권1호
• /
• pp.101-114
• /
• 1998

In this thesis, We tried to introduce definite integration to the curriculum of high school mathematics with numerical integration, which had been introduced with quadrature method. For this purpose, We used new experimental mathematics approaches, so-called investigation and examination. In chapter II, We examined how much computers had been used in teaching mathematics. In chapter III, We presented the theoretical background of approximation integration within numerical integration. In chapter IV, We studied and compared various methods of numerical integration, and examined the relation between curvature of a curved line and numerical integration. In order to study more easily, We used some of computer programs. We hope that this thesis will be a turning point in developing new teaching methods and improving curriculum of mathematics in high school.

• East Asian mathematical journal
• /
• 제34권4호
• /
• pp.463-486
• /
• 2018

This study identifies elements involved in designing rehearsals for improving preservice teachers' capacity to teach mathematics. Observation of a secondary mathematics methods course and regular interviews with the teacher educator following each class were used in this research. After characterizing what is considered and enacted in rehearsals as a way to help preservice teachers practice the work of teaching mathematics, I illustrate them with examples from the observations and interviews. I then discuss the challenge of dual contexts-the teacher education classroom and the secondary mathematics classroom-and dual perspectives-the mathematical and pedagogical-in designing and enacting rehearsals. I conclude with implications for mathematics teacher education.

• Archives of Plastic Surgery
• /
• 제43권3호
• /
• pp.248-253
• /
• 2016

Background Financial, clinical, and psychological considerations have made same-day surgery an attractive option for a variety of procedures. This article aimed to analyse the postoperative results of same-day primary unilateral cleft nasolabial repair. Methods This study was performed from 2011 to 2014. Unilateral cleft lip patients fulfilling the inclusion criteria were preoperatively classified as mild, moderate, and severe. All patients underwent same-day surgery and were discharged after satisfying the appropriate clinical criteria, receiving thorough counselling, and the establishment of a means of communication by phone. Postoperative outcomes were assessed and stratified according to preoperative severity and the type of repair. Results A total of 423 primary unilateral cleft lip patients were included. Fisher's anatomical subunit approximation technique was the most common procedure, followed by Noordhoff's technique. The postoperative outcome was good in 89.8% of cases, fair in 9.9% of cases, and poor in 0.2% of cases. The complication rate was 1.18% (n=5), and no instances of mortality were observed. The average hospital stay was 7.5 hours, leading to a cost reduction of 19% in comparison with patients who stayed overnight for observation. Conclusions Mild unilateral cleft lip was the most common deformity for which Fisher's anatomical subunit approximation technique was performed in most of the cases, with satisfactory postoperative outcomes. Refinements in the cleft rhinoplasty techniques over the course of the study improved the results regarding cleft nasal symmetry. Single-day primary unilateral cleft cheiloplasty was found to be a cost-effective procedure that did not pose an additional risk of complications.

• Smart Structures and Systems
• /
• 제24권2호
• /
• pp.233-242
• /
• 2019

In this paper, an inverse approach based on uniform load surface (ULS) is presented for structural damage localization and quantification. The ULS is excellent approximation for deformed configuration of a structure under distributed unit force applied on all degrees of freedom. The ULS make use of natural frequencies and mode shapes of structure and in mathematical point of view is a weighted average of mode shapes. An objective function presented to damage detection is discrepancy between the ULS of monitored structure and numerical model of structure. Solving this objective function to find minimum value yields damage's parameters detection. The teaching-learning based optimization algorithm has been employed to solve inverse problem. The efficiency of present damage detection method is demonstrated through three numerical examples. By comparison between proposed objective function and another objective function which make use of natural frequencies and mode shapes, it is revealed present objective function have faster convergence and is more sensitive to damage. The method has good robustness against measurement noise and could detect damage by using the first few mode shapes. The results indicate that the proposed method is reliable technique to damage detection in structures.

• 전자공학회논문지B
• /
• 제30B권11호
• /
• pp.56-65
• /
• 1993

This paper presents the design consideration of the MFNNs(Multilayer Feed forward Neural Networks) based on the distribution of the given teching patterns. By extracting the feature points from the given teaching patterns, the structure of a network including the netowrk size and interconnection weights of a network is initialized. This network is trained based on the modified version of the EBP(Error Back Propagation) algorithm. As a result, the proposed method has the advantage of learning speed compared to the conventional learning of the MFNNs with randomly chosen initial weights. To show the effectiveness of the suggested approach, the simulation result on the approximation of a two demensional continuous function is shown.

• Korean Journal of Mathematics
• /
• 제27권3호
• /
• pp.743-765
• /
• 2019

Conceptual and procedural knowledge of integration is necessary not only in calculus but also in real analysis, complex analysis, and differential geometry. However, students show not only focused understanding of procedural knowledge but also limited understanding on conceptual knowledge of integration. So they are good at computation but don't recognize link between several concepts. In particular, Riemann sum is helpful in solving applied problem, but students are poor at understanding structure of Riemann sum. In this study, we try to investigate understanding on conceptual and procedural knowledge of integration and to analyze errors. Conducting experimental class of Riemann sum, we investigate the understanding of Riemann sum structure and so present the implications about improvement of integration teaching.