• Korean Journal of Soil Science and Fertilizer
• /
• v.35 no.1
• /
• pp.27-37
• /
• 2002

With increasing the concerns of health improving foods. the demands of C. boreale M., which is a perennial flower and has been historically used for a natural medicine, become higher, recently, However, wild C. boreale M. collected in a mountatinous area is limited and not enough to cover all demands. The cultivation system and fertilization strategy are required to produce much amount of C. boreale M. with a good quality. We investigated the effects of soil amendment application on plant growth and effective components of C. boreale M. to develop efficient cultivation system. C. boreale M. was cultivated in a pot scale, and lime, fly ash, poultry manure compost and swine manure compost as an amendment applied with rate of 2, 20, 150 and $150Mg\;ha^{-1}$, respectively. Here, chemical fertilizers were applied with the same level ($N-P_2O_5-K_2O=150-80-80kg\;ha^{-1}$) in all treatments. Flower yields of C. boreale M., edible part as a natural medicine, were increased to 37 and 27% by swine and poultry manure compost application, respectively. Poultry manure compost amending (NPK+PMC) increased 3.6 times of proline content and 58% of total amino acids in the flower part more than chemical fertilization (NPK). But the contents of amino acids did not increase with amending liming materials like lime and fly ash. Cumambrin A, which is a sesquiterpene compound and has the effect of blood-pressure reduction, increased to 34 and 19% by lime and fly ash applications, respectively. Cumambrin A was significantly correlated with calcium content in the flower part of C. boreale M. Conclusively, soil amendments like compost and liming materials might contribute to increase the yields and quality of C. boreale M.

• Asia pacific journal of information systems
• /
• v.24 no.4
• /
• pp.611-635
• /
• 2014

Information systems (IS) have become ubiquitous and changed every aspect of how people live their lives. While some IS have been successfully adopted and widely used, others have failed to be adopted and crowded out in spite of remarkable progress in technologies. Both the technology acceptance model (TAM) and the IS Success Model (ISSM), among many others, have contributed to explain the reasons of success as well as failure in IS adoption and usage. While the TAM suggests that intention to use and perceived usefulness lead to actual IS usage, the ISSM indicates that information quality, system quality, and service quality affect IS usage and user satisfaction. Upon literature review, however, we found a significant void in theoretical development and its applications that employ either of the two models, and we raise research questions. First of all, in spite of the causal relationship between intention to use and actual usage, in most previous studies, only intention to use was employed as a dependent variable without overt explaining its relationship with actual usage. Moreover, even in a few studies that employed actual IS usage as a dependent variable, the degree of actual usage was measured based on users' perceptual responses to survey questionnaires. However, the measurement of actual usage based on survey responses might not be 'actual' usage in a strict sense that responders' perception may be distorted due to their selective perceptions or stereotypes. By the same token, the degree of system quality that IS users perceive might not be 'real' quality as well. This study seeks to fill this void by measuring the variables of actual usage and system quality using 'fact' data such as system logs and specifications of users' information and communications technology (ICT) devices. More specifically, we propose an integrated research model that bring together the TAM and the ISSM. The integrated model is composed of both the variables that are to be measured using fact as well as survey data. By employing the integrated model, we expect to reveal the difference between real and perceived degree of system quality, and to investigate the relationship between the perception-based measure of intention to use and the fact-based measure of actual usage. Furthermore, we also aim to add empirical findings on the general research question: what factors influence actual IS usage and how? In order to address the research question and to examine the research model, we selected a mobile campus application (MCA). We collected both fact data and survey data. For fact data, we retrieved them from the system logs such information as menu usage counts, user's device performance, display size, and operating system revision version number. At the same time, we conducted a survey among university students who use an MCA, and collected 180 valid responses. A partial least square (PLS) method was employed to validate our research model. Among nine hypotheses developed, we found five were supported while four were not. In detail, the relationships between (1) perceived system quality and perceived usefulness, (2) perceived system quality and perceived intention to use, (3) perceived usefulness and perceived intention to use, (4) quality of device platform and actual IS usage, and (5) perceived intention to use and actual IS usage were found to be significant. In comparison, the relationships between (1) quality of device platform and perceived system quality, (2) quality of device platform and perceived usefulness, (3) quality of device platform and perceived intention to use, and (4) perceived system quality and actual IS usage were not significant. The results of the study reveal notable differences from those of previous studies. First, although perceived intention to use shows a positive effect on actual IS usage, its explanatory power is very weak ($R^2$=0.064). Second, fact-based system quality (quality of user's device platform) shows a direct impact on actual IS usage without the mediating role of intention to use. Lastly, the relationships between perceived system quality (perception-based system quality) and other constructs show completely different results from those between quality of device platform (fact-based system quality) and other constructs. In the post-hoc analysis, IS users' past behavior was additionally included in the research model to further investigate the cause of such a low explanatory power of actual IS usage. The results show that past IS usage has a strong positive effect on current IS usage while intention to use does not have, implying that IS usage has already become a habitual behavior. This study provides the following several implications. First, we verify that fact-based data (i.e., system logs of real usage records) are more likely to reflect IS users' actual usage than perception-based data. In addition, by identifying the direct impact of quality of device platform on actual IS usage (without any mediating roles of attitude or intention), this study triggers further research on other potential factors that may directly influence actual IS usage. Furthermore, the results of the study provide practical strategic implications that organizations equipped with high-quality systems may directly expect high level of system usage.

• Korean Journal of Organic Agriculture
• /
• v.22 no.4
• /
• pp.667-682
• /
• 2014

The effects of liquid pig manure (LM) on the yield and quality of rice as well as soil chemical properties were determined in the field of sandy loam soil under the different fertilizer management. Treatments consisted of 100%, 130% and 160% N application rates of liquid manure as calculated on the basis of the recommended rate of nitrogen (9 kg N/10a) for rice cultivation. Chemical fertilizer (CF) was used as control. Concentrations of T-N and T-P in paddy water were measured by 5-day intervals up to 20days after application. LM treatments significantly increased T-N concentrations in paddy water proportionally with increasing rates of LM (13.2 to 25.7 mg/L). Similarly Total-P content in paddy water was increased right after LM applications but was well below the quality standard of wastewater and manure. Plant height and tillers in 100% and 130% N LM treatments were lower than those in CF control. In the 160% LM treatment, however, plant height and numbers of tillers were higher than those in the CF control. Yields in 100% LM and 160% LM plots were decreased by 3 and 5%, respectively, as compared with 422 kg per 10a in the CF plot. Rice protein contents were similar between 100% LM and CF control (about 6.8%) but it was increased to 7.2% and 7.7% in 130% LM and 160% LM treatments, respectively. Toyo-taste value in the 100% LM treatment was higher than in CF control plot. The proportions of perfect grain of the brown rice were lower in 130% LM and 160% LM treatments than that in CF control. Soil organic matter content, heavy metal and exchangeable cations were highest in the 160% LM plot. Thus considering yield and quality of rice and heavy metals contents in soil, 130% N basal application of liquid manure can be recommended for rice cultivation in this experiment.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.34 no.1
• /
• pp.52-59
• /
• 2014

This study was conducted to estimate the Hanwoo carrying capacity when whole crop wheat, as a winter forage crop, was grown on mixed-sowing of legume forage and by applying cattle manure on the productivity and feed value of whole crop wheat during the period of 2012~2013. The experiment was conducted in a split plot design with three replications. The main plots consisted of three different culture methods such as whole crop wheat and mixed sowing combination with hairy vetch or forage pea. The subplots consisted of four different applications of cattle manure (0, 50, 100 and 150 kg N/ha). The annual amount of dry matter (DM) of whole crop wheat in Gyeongju were higher than those of in Gyeongsan and Yeongju, and the mixed-sowing of hairy vetch mixture was the highest (p<0.05) compared with the single-sowing of whole crop wheat and mixed-sowing of legume in Gyeongju. The DM amounts were increased proportionately corresponded to the applying level of cattle manure, and was found to be significantly (p<0.05) high at the level of 100 and 150 kg/ha groups. With the feed value of forage, the crude protein (CP) contents tended to be higher in the mixed-sowing of legume than the single-sowing of whole crop wheat at the wintering experimental sites of legume. For whole crop wheat, total digestible nutrients (TDN) content was the highest in the mixed sowing plots of forage pea in Gyeongsan; however, there was no significant differences among the single-sowing of whole crop wheat. The carrying capacity of Hanwoo (head/ha) was higher (p<0.05) in Gyeongju (3.83 head) than that in Gyeongsan (3.11) and Yeongju (1.35). Further, the carrying capacity in the single-sowing of whole crop wheat was lower than that in the mixed-sowing of legume, and the hairy vetch was the highest among the mixed-sowing groups (p<0.05). Overall, the present results recommend taking into account the wintering for the mix-sowing of legume in Gyeongbuk province. The cattle manure may be applied for legume in the wintering unavailable regions. In addition, applying cattle manure at the level of 100~150 kg/ha and the mix-sowing of legume may increase the productivity per unit area and feed value, including the CP, for improving the carrying capacity of Hanwoo.

• Journal of Korean Neurosurgical Society
• /
• v.30 no.2
• /
• pp.131-136
• /
• 2001

Object : The clinical uses of screws are increasing with broader applications in spinal disorders. When screws are inserted repeatedly to achieve optimal position, tips of screw pitch may become damaged during insertion even though there are significant differences in the moduli of elasticity between bone and titanium. The effect of repeated screw insertion on pullout resistance was investigated. Methods : Three different titanium screws(cortical lateral mass screw, cancellous lateral mass screw and cervical vertebral body screw) were inserted into the synthetic cancellous material and then extracted axially at a rate of 2.4mm/min using Instron(Model TT-D, Canton, MA). Each set of screws was inserted and pulled out three times. There were six screws in each group. The insertional torque was measured with a torque wrench during insertion. Pullout strength was recorded with a digital oscilloscope. Results : The mean pullout force measurements for the cortical lateral mass screws($185.66N{\pm}42.60$, $167.10N{\pm}27.01$ and $162.52 N{\pm}23.83$ for first, second and third pullout respectively : p=0.03) and the cervical vertebral body screws($386.0N{\pm}24.1$, $360.2N{\pm}17.5$ and $330.9N{\pm}16.7$ : p=0.0024) showed consecutive decrease in pullout resistance after each pullout, whereas the cancellous lateral mass screws did not($194.00N{\pm}36.47$, $219.24N{\pm}26.58$ and 199.49N(36.63 : p=0.24). The SEM after insertion and pullout three times showed a blunting in the tip of the screw pitch and a smearing of the screw surface. Conclusions : Repetitive screw insertion and pullout resulted in the decrease of pullout resistance in certain screws possibly caused by blunting the screw tip. This means screw tips suffer deformations during either repeated insertion or pullout. Thus, the screws that have been inserted should not be used for the final construct.

• Restorative Dentistry and Endodontics
• /
• v.34 no.4
• /
• pp.324-332
• /
• 2009

The purpose of this study was to investigate the effect of rigidity of post core systems on stress distribution by the theoretical technique, finite element stress-analysis method. Three-dimensional finite element models simulating an endodontically treated maxillary central incisor restored with a zirconia ceramic crown were prepared and 1.5 mm ferrule height was provided. Each model contained cortical bone, trabecular bone, periodontal ligament, 4 mm apical root canal filling, and post-and-core. Six combinations of three parallel type post (zirconia ceramic, glass fiber, and stainless steel) and two core (Paracore and Tetric ceram) materials were evaluated, respectively. A 50 N static occlusal load was applied to the palatal surface of the crown with a $60^{\circ}$angle to the long axis of the tooth. The differences in stress transfer characteristics of the models were analyzed. von Mises stresses were chosen for presentation of results and maximum displacement and hydrostatic pressure were also calculated. An increase of the elastic modulus of the post material increased the stress, but shifted the maximum stress location from the dentin surface to the post material. Buccal side of cervical region (junction of core and crown) of the glass fiber post restored tooth was subjected to the highest stress concentration. Maximum von Mises stress in the remaining radicular tooth structure for low elastic modulus resin core (29.21 MPa) was slightly higher than that for high elastic modulus resin core (29.14 MPa) in case of glass fiber post. Maximum displacement of glass fiber post restored tooth was higher than that of zirconia ceramic or stainless steel post restored tooth.

• Journal of KIISE:Databases
• /
• v.28 no.4
• /
• pp.529-544
• /
• 2001

Prefetching is an effective method to minimize the number of roundtrips between the client and the server in database management systems. In this paper we propose new notions of the type-level access pattern and the type-level access locality and developed an efficient prefetchin policy based on the notions. The type-level access patterns is a sequence of attributes that are referenced in accessing the objects: the type-level access locality a phenomenon that regular and repetitive type-level access patterns exist. Existing prefetching methods are based on object-level or page-level access patterns, which consist of object0ids of page-ids of the objects accessed. However, the drawback of these methods is that they work only when exactly the same objects or pages are accessed repeatedly. In contrast, even though the same objects are not accessed repeatedly, our technique effectively prefetches objects if the same attributes are referenced repeatedly, i,e of there is type-level access locality. Many navigational applications in Object-Relational Database Management System(ORDBMs) have type-level access locality. Therefore our technique can be employed in ORDBMs to effectively reduce the number of roundtrips thereby significantly enhancing the performance. We have conducted extensive experiments in a prototype ORDBMS to show the effectiveness of our algorithm. Experimental results using the 007 benchmark and a real GIS application show that our technique provides orders of magnitude improvements in the roundtrips and several factors of improvements in overall performance over on-demand fetching and context-based prefetching, which a state-of the art prefetching method. These results indicate that our approach significantly and is a practical method that can be implemented in commercial ORDMSs.

• Journal of Intelligence and Information Systems
• /
• v.22 no.2
• /
• pp.97-113
• /
• 2016

Due to the growth of internet data and the rapid development of internet technology, "big data" analysis is actively conducted to analyze enormous data for various purposes. Especially in recent years, a number of studies have been performed on the applications of text mining techniques in order to overcome the limitations of existing structured data analysis. Various studies on sentiment analysis, the part of text mining techniques, are actively studied to score opinions based on the distribution of polarity of words in documents. Usually, the sentiment analysis uses sentiment dictionary contains positivity and negativity of vocabularies. As a part of such studies, this study tries to construct sentiment dictionary which is customized to specific data domain. Using a common sentiment dictionary for sentiment analysis without considering data domain characteristic cannot reflect contextual expression only used in the specific data domain. So, we can expect using a modified sentiment dictionary customized to data domain can lead the improvement of sentiment analysis efficiency. Therefore, this study aims to suggest a way to construct customized dictionary to reflect characteristics of data domain. Especially, in this study, movie review data are divided by genre and construct genre-customized dictionaries. The performance of customized dictionary in sentiment analysis is compared with a common sentiment dictionary. In this study, IMDb data are chosen as the subject of analysis, and movie reviews are categorized by genre. Six genres in IMDb, 'action', 'animation', 'comedy', 'drama', 'horror', and 'sci-fi' are selected. Five highest ranking movies and five lowest ranking movies per genre are selected as training data set and two years' movie data from 2012 September 2012 to June 2014 are collected as test data set. Using SO-PMI (Semantic Orientation from Point-wise Mutual Information) technique, we build customized sentiment dictionary per genre and compare prediction accuracy on review rating. As a result of the analysis, the prediction using customized dictionaries improves prediction accuracy. The performance improvement is 2.82% in overall and is statistical significant. Especially, the customized dictionary on 'sci-fi' leads the highest accuracy improvement among six genres. Even though this study shows the usefulness of customized dictionaries in sentiment analysis, further studies are required to generalize the results. In this study, we only consider adjectives as additional terms in customized sentiment dictionary. Other part of text such as verb and adverb can be considered to improve sentiment analysis performance. Also, we need to apply customized sentiment dictionary to other domain such as product reviews.

• Journal of Radiation Industry
• /
• v.7 no.1
• /
• pp.7-14
• /
• 2013

In this study, we investigated the applicability of the photostimulated luminescence (PSL), thermoluminescence (TL) and electron spin resonance (ESR) methods for various foods. The analysed samples consist of 11 items including dried fruits (6 items) and mushrooms (5 items). To compare between non-irradiated and irradiated food, all samples were irradiated with $^{60}Co$ gamma-ray source. In PSL study, the photon counts of all the unirradiated sample were identified negative (lower than 700). The photon counts irradiated (1, 5, 10 kGy) dried date-palm, dried jujube and mushrooms (Auricularia auricula, Phellinus linteus and Sarcodon aspratus) showed positive (higher than 5,000) and the results for the other samples were negative or intermediate (>700 and >5,000). In TL analysis most of items can be applicable to detect irradiated foods because of showing TL ratio above 0.1. The glow curves by TL method were estimated in the range of $150{\sim}250^{\circ}C$ in irradiated samples. In ESR measurements, the intensity of ESR signal (single-line) increased as the dose of irradiation increased. In particular, the specific ESR signals of irradiation-induced radical were detected in dried papaya, dried date-palm, dried banana, dried pineapple and S. aspratus. According to the results, PSL, TL and ESR methods were successfully applied to detect the irradiated foods. It is concluded that PSL, TL and ESR methods are suitable for detection of irradiated samples and a combined method is recommendable for enhancing the reliability of detection results.

• Journal of Radiation Industry
• /
• v.7 no.1
• /
• pp.69-74
• /
• 2013

This study examined radiation detection characteristics of spices (cumin, caper and turmeric), other small fruits (hut-gae berry and boxthorn), and pollen extract product. Each samples were irradiated at dose of 1, 5, and 10 kGy and analyzed by the thermoluminescence (TL) and electron spin resonance (ESR) methods. To compare between non-irradiated and irradiated food, all samples were irradiated with $^{60}Co$ gamma-ray source. In TL analysis, most of samples could be applied to detect irradiated foods because of showing TL ratio above 0.1. The glow curves examined by TL method were estimated in the range of $150{\sim}250^{\circ}C$ in irradiated samples. In ESR measurements, the intensity of ESR signal (single-line) increased as the increase of irradiation dose. In particular, the specific ESR signals of irradiation-induced radical were detected in hut-gae berry and pollen extract product. As a results, it is considered that TL and ESR methods can be used to detect both hut-gae berry and pollen extract product. But cumin, caper, turmeric and boxthorn irradiated with gamma ray could be detected only by TL method. It is concluded that TL and ESR methods are suitable for detection of irradiated samples and a combined method is recommendable for enhancing the reliability of detection results.