• Structural Engineering and Mechanics
• /
• v.63 no.6
• /
• pp.761-769
• /
• 2017

Accurately extracting the axle distribution information of a passing vehicle from bridge dynamic responses experiences a key and challenging step in non-pavement bridge weigh-in-motion (BWIM). In this article, the wavelet transformation is adopted and the wavelet coefficient curve is used as a substitute for dynamic response. The driving frequency is introduced and expanded to multi-axle vehicle, and the wavelet coefficient curve on specific scale corresponding to the driving frequency is confirmed to contain obvious axle information. On this basis, an automatic method for axle distribution information identification is proposed. The specific wavelet scale can be obtained through iterative computing, and the false peaks due to bridge vibration can be eliminated through cross-correlation analysis of the wavelet coefficients of two measure points. The integrand function that corresponds to the maximum value of the cross-correlation function is used to identify the peaks caused by axles. A numerical application of the proposed axle information identification method is carried out. Numerical results demonstrate that this method acquires precise axle information from the responses of an axle-insensitive structure (e.g., girder) and decreases the requirement of sensitivity structure of BWIM. Finally, an experimental study on a full-scale simply supported bridge is also conducted to verify the effectiveness of this method.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.526-529
• /
• 2007

Due to its inherent feature of high-resolution satellite, there is strong need in some specific area to minimize the processing time required to get a standard image on hand from downlink signal acquisition. However, in general image processing system, it takes considerable time to get image data up to certain level from raw data acquisition because the huge amount of data is dealt sequentially as input data. This paper introduces the high-speed image processing system which generates the image data only for the area selected by user. To achieve the high speed performance, this system includes Quick Look Image display function with sampling, ROI selection function, Image Line Index function, and Distributed processing function. The developed RPS was applied to KOMPSAT-2 320Mbps downlink channel and its effectiveness was successfully demonstrated. This feature to provide the image product very quickly is expected to promote the application of high resolution satellite image.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.9 no.2
• /
• pp.121-128
• /
• 2015

In this paper, we introduce our smart phone application for hearing impaired people. Unlike previous hearing aids application, our application has both functions of self hearing tests and sound amplification. We provide user with two types of self hearing test, those are standard hearing test and detail hearing test. Each test has different advantages like short test time and accurate test result, however both tests provide reliable result. Our hearing test allows that user can measure their hearing loss level according to the frequency. Sound amplification function provide proper fitting formula by using NAL-NL1, and it guarantees high speech intelligibility. Our application can also memorize user's fitting data at specific test condition. Therefore those who using our hearing aids application can easily reset their hearing aids / earphone properties periodically. Our application is advanced at the aspect of self fitting function that no other previous application did. So we are expecting these comfortable processes about fitting lead the number of hearing aids user to be increased.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2006.04a
• /
• pp.857-864
• /
• 2006

Due to the difficulties in numerical generation of random fields that satisfy not only the probabilistic distribution but the spectral characteristics as well. it is relatively hard to find an exact response variability of a structural response with a specific random field which has its features in the spatial and spectral domains. In this study. focusing on the fact that the random field assumes a constant over the domain under consideration when the correlation distance tends to infinity, a semi-theoretical solution of response variability is proposed for in-plane and plate bending structures. In this procedure, the probability density function is used directly resulting in a semi-exact solution for the random field in the state of random variable. It is particularly noteworthy that the proposed methodology provides response variability for virtually any type of probability density functions.

• Progress in Superconductivity and Cryogenics
• /
• v.22 no.1
• /
• pp.17-23
• /
• 2020

Cryogenic insulation systems, with proper materials selection and execution, can offer the highest levels of thermal performance. Insulations are listed in order of increasing performance and, generally, in order of increasing cost. The specific insulation to be used for a particular application is determined through a compromise between cost, ease of application and the effectiveness of the insulation. Consequently, materials, representative test conditions, and engineering approach for the particular application are crucial to achieve the optimum result. The present work is based on energy cost balance for optimizing the thickness of insulated chambers, using foamed or multi layered cryogenic shell. The considered insulation is a uniformly applied outer layer whose thickness varies with the initial and boundary conditions of the studied vessel under steady-state radial heat transfer. An expression of the optimal insulation thickness derived from the total cost function and depending on the geometrical parameters of the container is presented.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.10a
• /
• pp.61-64
• /
• 2008

This paper gives the application method for Electric Heat Rump to DSM programs. The EHP has a function transfer heat and uses electricity as a energy source. In nowadays, as oil prices go up, many People uses the EHP, instead of GHP, the electric power peak load is escalating gradually. By that reason, to achieve successful load leveling, new DSM programs for EHP is needed. Under those circumstances, we discussed about the need of DSM programs for EHP, and the detail method for application EHP to DSM programs in this paper. And we dealt with the site specific test for EHP, and analyzed the test result.

• Honam Mathematical Journal
• /
• v.32 no.1
• /
• pp.101-112
• /
• 2010

Using some interesting convolution, we find kernels recovering the given function f. By a slight change of this convolution, we obtain an identity filter related to the Fourier series in the discrete time domain. We also introduce some techniques to decompose an impulse into several dilated pieces in the discrete domain. The detail examples deal with specific constructions of those decompositions. Also we obtain localized moving averages from a decomposition of an impulse to make hybrid Bollinger bands, that might give various strategies for stock traders.

• Proceedings of the PSK Conference
• /
• 2003.04a
• /
• pp.96-98
• /
• 2003

1. Standard and regulations for functional food evaluation cases form overseas (1) Japan For food function indication, Food Nutrition Improvement Act was amended in September 1991 and they managed functional food after setting specific health food in one of classification of special functional foods. For manification of raw material usage, the classification of health functional foods was performed by their application on: the control of internal organ status, cholesterol, blood pressure, mineral absorption, and prevention of dental caries. (omitted)

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2000.04a
• /
• pp.268-271
• /
• 2000

Based on the rapid development of information technology (IT) including networks, manufacturing environment faces more customer engagement, global collaboration, greater emphasis on agility, increasing reach and connectivity through world-wide web, and micro transaction tracking and intelligence to name a few. The new ideas of manufacturing concept, eManufacturing is discussed in view of IT. In specific, a framework to identify. IT application in the product realization process and collaboration and coordination to implement eManufacturing is proposed.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.5
• /
• pp.34-40
• /
• 2000

최근 CNC에는 또 하나의 전기를 마련할 수 있는 여러 가지 새로운 이슈들이 등장하고 있다. 첫 번째 이슈는 고도로 발달해가고 있는 반도체 산업의 영항으로 CPU의 속도가 기하급수적으로 달라지고 있고 메모리 용량이 상상을 초월할 정도로 급속한 발전을 거듭하고 있다. 이런 환경 속에서 자연스럽게 CNC도 성능이 우수한 하드웨어와 그 성능에 어울리는 고급 소프트웨어 탑재가 요구된다. 두 번째 이슈는 기존의 공작기계에서 생각하지 못했던 개념의 변화이다.(중략)