• The Journal of the Korean dental association
• /
• v.49 no.7
• /
• pp.398-409
• /
• 2011

With an increase of public's perception on "minimally invasive dentistry", more patients are demanding orthodontic alignment of anterior teeth rather than restorative treatment which is more invasive. One draw back of orthodontic alignment has been that it takes long time. To overcome this limitation, a new orthodontic device named Mini-Tube Appliance (MTA), have been developed. With the combined use of light NiTi wire and inter-proximal stripping, rapid anterior alignment can be obtained efficiently. This article presents the use of MTA for rapid alignment of anterior teeth and its clinical guidelines with typical case samples.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.34 no.7
• /
• pp.43-52
• /
• 2018

In this study, annual site and primary energy use intensities (EUIs) and CO2 emission intensities (CEIs) per area by end use were estimated based on the measurement data from June 2016 to May 2017 of 50 sample apartment units in Seoul. In addition, estimated site EUIs by end use were compared to the U.S. Residential Energy Consumption Survey (RECS) 2009 data. Site EUIs by end use were found to be in the order of heating > electric appliance > domestic hot water > cooking > lighting > cooling > air movement. In the case of primary EUIs and CEIs by end use, electric appliance was found to be the largest. As results of comparison with the RECS 2009 data, it was found that site EUIs were very similar for heating, domestic hot water and electric appliance, etc., but slightly different for cooling. The number of sample apartment units will continue to increase until 2020 (total number of samples 200) and intensities data by end use will be continuously updated through continuous collection of measurement data.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.34 no.8
• /
• pp.19-27
• /
• 2018

In this study, annual site and primary energy use intensities (EUIs) and $CO_2$ emission intensities (CEIs) per area by end use were estimated based on the measurement data from June 2016 to May 2017 of 19 sample office buildings in Seoul. In addition, the estimated site EUIs by end use were compared to the U.S. Commercial Buildings Energy Consumption Survey (CBECS) 2012 data. Average site EUIs by end use were found to be in the order of electric appliance (typical floors) > heating > cooling > lighting > air movement > domestic hot water > vertical transportation > city water supply. In the case of primary EUIs and CEIs by end use, electric appliance was found to be the largest. As results of comparison with the CBECS 2012 data, it was found that the site EUIs were similar for heating, cooling, domestic hot water, and electric appliance, etc., but slightly different for lighting and air movement. The number of sample office buildings will continue to increase until 2020 (total number of samples 85) and intensities data by end use will be continuously updated through continuous collection of measurement data.

• The korean journal of orthodontics
• /
• v.14 no.2
• /
• pp.273-285
• /
• 1984

The present paper describes 4 clinical cases of Hellman dental age III A group of functional Class III malocclusion in which the horsehoe appliance was applied to obtain normal anteroposterior relationship between jaws. What is the most noteworthy in the result from the use of this appliance is that minimum down and backward rotation during backward repositioning of the mandible is noticed and the excellent retentive property in itself makers allowance for effective orthopedic correction in mixed dentition with anterior crossbite.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2007.05a
• /
• pp.160-165
• /
• 2007

Recently, the interior design of electric home appliance stores requires comprehensive image management with systemic marketing strategies and consistence in order to attract consumers to purchase products. However, the environment of domestic electric home appliance stores is complex and confused by indiscreet design factors and operation. Despite of the fact that company costs a lot of money to manage each store, consumers are not provided with selling environment with high quality. On the other hand, it is inevitable to compete with foreign specialized stores and discount malls due to opening distribution market. Besides, company has faced to attract customers with distinct strategies in order to survive in various competition system. In this sense, in store environment, there should be consistent image in interior design of the store based on management ideology of the company for the successful management of electric home appliance stores. The purpose of this research is to investigate and analyze the case of Samsung Electronics's electric home appliance stores among domestic electric home appliance stores that is applied with Store Identity Program (hereafter SIP) and to suggest solutions for the problems. Therefore, it is purposed to use as references for the stores that has the similar interior design plan. The result of this study is to upgrade the store image through providing basic data about role of data and distinct factors for competitive design as a part of Store Identity Strategy. Furthermore, it can be important data to optimize the profits and to make positive space for both consumer and company as company and products are credible with mental satisfaction of consumers if there is enough study on SIP and process and symbol of company and products to consumers, enough recognition and improvement on problems.

• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.247-251
• /
• 2001

Universal motors are mainly used for vacuum cleaner application. There are a lot of researches on SRM that applys home appliance throughout the world. The manufacturing cost of SRM drive makes it hard to expand its application to home appliance. This paper presents Single Phase SRM for the vacuum cleaner that has advantge in cost and performance over conventional universal motor. This paper proposes new power device driving scheme by using SRM switching characteristic. The driving scheme is very simple and inexpensive. Dwell Time Control method is used for the minimum switching loss of power device. The switching frequency of power device is less than 4.5kHz at 45,000rpm. By use of this scheme, power device based on very small switching losses can be used on SRM drive. Also, the biggest problem in single phase SRM is starting, this paper shows a new starting algorithm with two hall sensors, accelerating and running sensors, respectively. Finally, the proposed Single Phase SRM achieves higher efficiency and long life time compared to universal motor. Its life time is more than 1500 hours. Its life time is extended 4 times than that of conventional motor and its suction power is increased $20\%$ at the same volume of conventional universal motor.

• Proceedings of the KIEE Conference
• /
• 1997.07c
• /
• pp.764-766
• /
• 1997

This paper presents a DSM Monitoring Methodology which is able to evaluate the impact of DSM programs under processing. For an effective assessment of DSM programs, it is foremost necessary to examine the market characteristics on the specific end-use appliance according to the customer's adoption of DSM programs. The Proposed Monitoring system contains a diffusion process of high efficient end-use considering major factors of DSM impact such as, price, price elasticity and lifetime of end-use apparatus or appliance. The case study shows the propriety and necessity of DSM monitoring in order to diagnose the current state and provide a baseline of DSM policy

• The Journal of the Korean dental association
• /
• v.57 no.4
• /
• pp.241-247
• /
• 2019

Etiology of temporomandibular disorders is multifactorial origin and complex. therefore, reversible and conservative treatment is recommended in the initial approach of TMD. oral appliances are widely used to manage TMDs, while their mechanisms of action and its effects remain controversial and unclear. The purpose of this paper was to review information regarding the types, designs, and materials of occlusal appliances and the rationale for the continued use of OS for the management of TMDs.

• The korean journal of orthodontics
• /
• v.28 no.4 s.69
• /
• pp.547-561
• /
• 1998

Obstructive sleep apnea (OSA) is a disorder characterized by repetitive episode of upper airway collapse during sleep. Recent studies showed that not only the anatomic factors but the physiologic factors of the upper airway also have effcts on the occurrence of apnea and that the genioglossus muscle also plays an important role in the maintenance of the upper airway. A variety of therapies were performed to treat OSA, and among them the use of mandibular repositioning appliances showed reasonable results. But there is still a lack of research on the structural and physiological mechanism upon the use of mandibular repositioning appliances. The author selected 26(male 17, female 9) OSA patients that came to the Yonsei University Dental Hospital, Department of Orthodontics, and 20 normal adults (male 10, female 10) and took cephalometric radiographs of them in a supine position before and after the placement of the mandibular repositioning appliance to see the structural changes of the upper airway and compare the therapeutic effects between the two groups. We also studied the waking genioglossus muscle activity in OSA patients and investigated the difference in the electromyogram of the genioglosssus muscle upon the change in body posture and the use of mandibular repositioning appliance. Following results were obtained. 1. Among the cephalometric measurements of the upper airway structure, the length of the soft palate, maximum thickness of the soft Palate and SPAS, MAS, VAL, H-H1, MP-H showed statistically significant differences between the normal and OSA groups, but the IAS and EAS showed no statistically significant differences between the two groups. 2. In both the normal and OSA groups, as the epiglottis moved forward on wearing the mandibular repositioning appliance, the epiglottis level of the upper airway increased and the maximum thickness of the soft palate changed and the hyoid bone also moved forward, but the IAS in both groups showed various results and the effect of the mandibular repositioning appliance on the structure of the upper airway was different in the two groups. 3. Upon changing the position, the electromyogram of the genioglossus muscle showed a increasing tendency but there was no statistically significant differences, and when the mandibular repositioning appliance were worn there was a statistically significant increase in the electromyogram of the genioglossus muscle in both the upright and supine positions. The mandibular repositioning appliances not only have an effect on the anatomical structure of the upper airway but also on the physiology of the upper airway. There are different responses to the use of mandibular repositioning appliance between the normal and OSA groups therefore it could be considered to have the different physiology of the upper airway between the two groups.

• Korean Journal of Human Ecology
• /
• v.14 no.4
• /
• pp.693-707
• /
• 2005

This study investigates the over time changes in the ownership of kitchen items, electric or non-electric, and examines the patterns of the usage and ownership of the items after categorizing them as followings: cooking appliances, kitchen appliances directly related to storing food, food processing kitchen items, and dining items. The research findings are that refrigerators and rice cookers, among the electric items, had spread to almost every households by 1990s and at the same time about thirty non-electric kitchen items had been used. Refrigerators had been used by more than 100% of the households by 2000, and on top of that, twenty or more electric kitchen items such as Kimchi fridge and freezer had been used. In the case of non-electric kitchen items, approximately 50 to 70 sorts of them are used, which indicates an increase than in 1990s. Rice cookers and gas stoves, among cooking appliances, are recognized as the essential item, and they are actually frequently-used items. As to kitchen appliances related to storing food, each household owns one of the refrigerators and Kimchi fridges, and again they are both the frequently-used. As far as food processing kitchen items are concerned, each household owns at least one or more blenders and hand blenders, six or more knives, and five or more pans. Each household owns seventeen or more rice bowls and soup bowls and twenty-four or more plates. Small plates are more frequently used than large ones.