• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.1
• /
• pp.83-89
• /
• 2010

If an appliance perceives the location or health condition of a resident in the smart home, it can provide more intelligent service actively. That is, while the conventional appliance is operated by manual input of a resident, the location-based human adaptive appliance detects the resident's information such as location, activity pattern, or health condition by itself and provides the most suitable living condition for the resident autonomously. This paper presents the real-time location-based metabolic rate estimation method that measures the amount of physical activity (metabolic rate) for location-based human adaptive air-conditioner. And, the feasibility of the algorithm is evaluated experimentally on a test bed using the pyroelectric infrared sensor-based indoor location aware system (PILAS) that is a non-terminal-based location-aware system.

• Journal of Oral Medicine and Pain
• /
• v.45 no.2
• /
• pp.29-33
• /
• 2020

Tardive dyskinesia (TD) is continuous, repetitive movement disorder of tongue, lip or jaw, induced by medication. It causes pain and dysfunction of oral structures but also interferes with dental treatment and overall social life of patients. As a dentist, it is imperative to recognize and manage TD, although currently, there is no definitive treatment for TD. This article reports a patient with TD of tongue, successfully managed with an oral appliance mimicking sensory tricks. Considering the limited treatment options for TD, an oral appliance, a simple and conservative approach, can be a meaningful treatment for some patients with orofacial dyskinesia.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2000.10b
• /
• pp.985-988
• /
• 2000

내장형 기기의 다양성 및 적용 범위의 확장으로 내장형 기기용 운영체제도 기기별 다양성을 지원할 것이 요구되고 있다. 이러한 특성을 갖는 운영체제를 조림형 운영체제라 한다. 본 논문에서는 조림형 실시간 운영체제인 Qplus커널의 입출력 시스템 개발에 대하여 기술한다. Qplus의 입출력 시스템은 사용자의 요구에 따라 입출력 장치 구동기의 조림이 가능하며 일관된 사용자 인터페이스 및 간편한 장치 구동기 인터페이스, 빠른 입출력을 지원한다. 현재 SA110 보드를 사용한 ITSB 에서 시험되었으며 앞으로 AIO, 가상 터미널 구동기의 지원 및 입출력 성능 시험을 수행할 예정이다.

• Journal of TMJ Balancing Medicine
• /
• v.3 no.1
• /
• pp.23-26
• /
• 2013

Objectives: Therapeutic effect of Yinyang Balancing Appliance of functional cerebrospinal therapy (FCST) for meridian and neurologic yinyang balance was observed in Iron Deficiency Anemia. Methods: One Iron Deficiency Anemia cases were managed with the Yinyang Balancing Appliance on temporomandibular joint (TMJ), combined with acupuncture. Clinical outcome measurement was based on subjective measures and clinical observations. Results: The patients showed positive changes even after the initial treatment and this effext maintained over the follow-up period. Conclusions: Although it is not clear the effect is a sustaining or temporary in its nature, a positive effect was observed and further clinical and biological research on FCST is expected.

• Proceedings of the KIEE Conference
• /
• 2002.06a
• /
• pp.153-157
• /
• 2002

Electricity living body formation operation appliance is using most imports until present. And, because electricity living body formation operation appliance is too expensive, it becomes burden to buy in small scale hospital. Also, problem that economical damage by income is added follows, Therefore, this treatise developed electricity living body formation operation appliance by home production, Ultra high frequency eruption circuit used LC circuit, and output frequency is possible to 8 [MHz], and output voltage amplified maximum 800 [V]. This operation appliance could display size of fixed current. This developed product could microscopic operation fewer than 1 [mm]. This development technology is considered by do metallic surface heat treatment, melting, welding, induction heating device and that can apply to domestic animals surgical operation and so on.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05a
• /
• pp.127-132
• /
• 2002

Electricity living body formation operation appliance is using most imports until present. And, because electricity living body formation operation appliance is too expensive, it becomes burden to buy in small scale hospital. Also, problem that economical damage by income is added follows. Therefore, this treatise developed electricity living body formation operation appliance by home production. Ultra high frequency eruption circuit used LC circuit. and output frequency is possible to 8 [MHz], and output voltage amplified maximum 800 [V]. This operation appliance could display size of fixed current. This developed product could microscopic operation fewer than 1 [mm]. This development technology is considered by do metallic surface heat treatment, melting, welding, induction heating device and that can apply to domestic animals surgical operation and so on.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.04b
• /
• pp.1077-1080
• /
• 2002

본 논문은 다양한 홈네트워크의 미들웨어간의 연동 서비스를 위한 구조를 설명한다. 최근 홈네트워킹 개념이 정립됨에 따라 다양한 매체(IEEE1394, USB, PLC, TP, IRDA, BLUETOOTH 등)를 지원하는 다양한 정보가전 디바이스가 나오고 있고 이들을 제어하기 위한 Jini, Havi, LonWorks 등의 홈네트워크 미들웨어가 거론되고 있다. 홈 내에 다양한 미들웨어를 지원하는 정보기기, 백색가전 제어기기, AV 기기 등의 디바이스들 사이에 가능한 서비스를 미리 살펴보고 이를 지원하기 위한 환경을 제안한다. 본 논문에서 설계한 홈네트워크 미들웨어 연동 서비스는 다양한 매체를 홈서버에서 수용하여 중앙 집중적인 연동 서비스가 가능하도록 구축하였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2000.04a
• /
• pp.434-439
• /
• 2000

본 논문에서는 GIANT-II 미들웨어의 국제표준 기능과 GIANT-II만의 차별적 기능 등을 소개함과 아울러 이를 활용한 상용화 수준의 인터넷 시범 서비스들 중 멀티미디어 콜 센터를 소개한다. 현재까지의 관련 연구 결과들은 대화의 실시간성이 결여되어 있고, 공통된 미들웨어 없는 개별적인 개발로 호환이 결여된 중복성을 야기시킬 우려가 있다는 단점이 있다. GIANT-II는 이러한 한계를 극복하기 위하여 핵심 기능을 계층 구조로 통합한 것으로 1) Collaborative Multimedia Middleware, 2) 기본 소프트웨어, 3) 응용 소프트웨어로 구성되어 있다. 본 논문에서는 이러한 특징의 Internet Multimedia Collaboration을 위한 플랫폼인 GIANT-II의 기본 개념과 구성 요소를 설명한다.

• Journal of Korea Multimedia Society
• /
• v.24 no.12
• /
• pp.1653-1662
• /
• 2021

In this paper, we propose a small waste appliance collection system that can be used for efficient waste appliance collection, and implement an unmanned automatic small waste appliance collector system. First, we collected cases related to the collection of waste home appliances, compared and analyzed methods, and arranged the characteristics. We analyzed at the requirements for the collection and management system of waste appliances by dividing it into the aspect of the discharger and the recycling business company. The collection system consists of a client-server structure, which is a collector system and a collection management server. The unmanned automatic collector system is divided into a control unit and a machine/mechanical unit. We identified the functions that the collector system must perform and the hardware required to perform these functions. Based on this, the collector system was implemented as an embedded system. The hardware and software used in the implementation are described and the implementation results are described. The collection system developed in this paper will contribute to the development of urban mining industry by enabling the efficient collection of waste appliances.

• The korean journal of orthodontics
• /
• v.51 no.6
• /
• pp.428-434
• /
• 2021

Craniofacial clefts are extremely rare deformities. Tessier's classification is a widely accepted system that is based on clinical, radiographical, and surgical observations. The Tessier No. 0 cleft most commonly affects the upper lip, nose, and palate. This case presentation aims to report the outcome of a modified presurgical alveolar molding (PAM) appliance used in the treatment of an infant with Tessier No. 0 cleft as an alternate approach to mold such defects before surgery. The modified PAM appliance consisted of reciprocal parts connected by a helix. The segments were approximated by stripping the appliance at the midline in a V-shaped manner and the force was exerted by the extraoral elastics. The procedure gave results in 8 weeks, which may be regarded as a reasonable duration. The anterior cleft gap, which was 13 mm before the treatment, was reduced to 3 mm after the treatment by using modified PAM appliance. On a 21-month follow-up period, oral reshaping was regarded successful due to stability of the improved oral mold.