• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제41권
• /
• pp.5.1-5.5
• /
• 2019

Background: The present study aimed to determine whether laypeople and professionals rate the facial appearance of individuals with repaired complete unilateral or bilateral cleft lip and palate (UCLP, BCLP) similarly based on viewing full facial images. Methods: The study followed a cross-sectional analytical design where five young patients aged 10 to 14 years, who had completed all stages of their unilateral or bilateral cleft lip and palate treatment (bilateral: three, unilateral: two), were evaluated by two groups. The assessment was done by laypeople and 97 qualified professionals (33 orthodontists, 32 plastic surgeons, and 32 oral and maxillofacial surgeons). Professionals were not involved in any stage of the patients' treatment. Results: The facial appearance assessment of the professional groups on different facial aesthetics was significantly lower than that of laypeople, and they had higher perceived need for further treatment. On the other hand, laypeople had higher aesthetic ratings and lower perceived need for further treatment. Differences were also observed between the assessments of the professional groups. Participants who had lower aesthetic assessments of the repair tended to report a higher influence of cleft lip and palate on social activities and professional life. Conclusion: Differences in perception exist between healthcare professionals and laypeople. The discrepancies between the professional groups could be attributed to different treatment modalities and protocols.

• 융합정보논문지
• /
• 제10권3호
• /
• pp.141-150
• /
• 2020

본 연구는 여대생의 외모에 대한 올바른 가치관 정립을 위해 미용성형 경험과 관련 요인을 조사하였다. 자료 수집은 경기, 충청, 전라도 여대생 283명을 대상으로 조사하였고 SPSS 18.0 프로그램을 사용하여 Chi-square test, T-test, Binary logistic regression으로 분석하였다. 연구결과, 미용성형 경험이 66.1%로 나타났고, 학년이 높아짐에 따라 미용성형 경험이 높게 나타났다. 정보원으로는 '가족 및 주위사람'이 45.9%로 가장 많았고, 미용성형 종류는 '눈 성형'이 25.8%로 가장 높게 나타났다. 외모관심도와 미용성형인식도는 미용성형 경험이 있는 경우가 없는 경우보다 높게 나타났다. 미용성형 경험에 관련된 요인은 학년, 용돈, 외모관심도로 나타났고, 변수들의 설명력은 15.6%였다. 미용성형 정보에 대한 기초자료의 마련과 올바른 미의 가치관 확립을 위한 프로그램 개발이 요구되고, 미용성형에 대한 합리적 결정을 위한 교육과 상담이 필요할 것으로 사료된다.

• Physical Therapy Rehabilitation Science
• /
• 제9권4호
• /
• pp.230-237
• /
• 2020

Objective: To investigate the physical appearance and therapeutic changes that occur with the performance of Schroth exercise in patients with scoliosis. Design: Randomized controlled trial. Methods: Fifteen subjects with maximum curvature of the lumbar who were diagnosed with idiopathic scoliosis had volunteered to participate in the study. Eight subjects were included in the experimental group where they performed the Schroth Therapeutic Exercise and the other seven were included in the control group. The experimental group underwent 2 hours of weekly treatment for 12 weeks, while the control group did not during the same period based on the decisions of patients or guardians. The Mann-Whitney rank test was carried out to compare the treatment results of the two groups, and the comparison within the group was done by Wilcoxon signed-rank test. The vertebral rotation angle (VRA) was by Scoliometer, and difference of rotated and curved portion volume (DV) between both sides on the major curvature portion measured by 3D human body scanning system. Results: In the experimental group, 12 weeks of Schroth exercise therapy has significant improved in correction rate (CR) in Cobb's angle (CA), VRA, and DV between both sides on the major curvature portion (p<0.05), while significant differences were not found between the groups regarding weight bearing difference in both feet (WD) and DV (p<0.05). Conclusions: Schroth exercise performance showed significant changes in the patient's therapeutic changes (CA, VRA), but the physical appearance (DV, WD) was not significant, indicating that external changes in the treatment goal setting are more difficult goals to achieve.

• Design & Manufacturing
• /
• 제6권2호
• /
• pp.1-5
• /
• 2012

Weld line in injection molded part is one of the defects in injection molding process. Weld line deteriorates not only appearance quality but mechanical property. In this study, ABS and PP were used as experimental materials. And weld line length, depth and strength have been examined according to the injection molding conditions. As the results of experimental studies, weld line length increased as flow rate increases for all materials. And the flow rate is most influenced to the creation of weld line length. Also weld line strength increased, as flow rate and melt temperature increase for all materials. The whole experiment results was similar to CAE analysis results.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.615-619
• /
• 2009

This paper is investigated to variation of wave power generation operation rate, operating capacity and output with the wave conditions represented by wave height-period window. By the use of the long-term wave data from 1979 to 2002 which is provided by Korea Ocean Research & Development Institute(KORDI), we calculated the monthly variation of significant wave height(Hs), zero-up crossing period(Tz) and distribution of wave appearance rate. And using the same wave data, it was charted the Hs-Tz and wave-energy scatter diagrams.

• 한국금형공학회:학술대회논문집
• /
• 한국금형공학회 2008년도 하계 학술대회
• /
• pp.115-119
• /
• 2008

Weld line in injection molded part is one of the defects in injection molding process. Weld line deteriorates not only appearance quality but mechanical property. In this study, ABS and PP were used as experimental materials. And weld line length, depth and strength have been examined according to the injection molding conditions. As the results of experimental studies, weld line length increased as flow rate increases for all materials. And the flow rate is most influenced to the creation of weld line length. Also weld line strength increased, as flow rate and melt temperature increase for all materials. The whole experiment results was similar to CAE analysis results.

• 한국연초학회지
• /
• 제8권1호
• /
• pp.41-48
• /
• 1986

This experiment was carries out to study on the effect of temperature raising rate to chemical composition of tobacco leaves during the midrib drying stage of flue-curing. The results were as follows : In the case of the temperature raising rate became more rapidly during midrib drying stage. It had a tendency to increase in oxailic acid, succinlc acid, ammonia, polyphenol; there was a large loss of total sugar, reducing sugar, malic acid, palmitic acid and linolenic acid; leaf color became more reddish; the leaf quality index value decreased, thereby the quality of external appearance deteriorated. It is desirable that the temperature raising rate had to be more slowly.

• 한국작물학회지
• /
• 제46권3호
• /
• pp.195-201
• /
• 2001

본 연구는 광안벼를 공시하여 지연일장의 인공기상실(21$^{\circ}C$ 및 24$^{\circ}C$)과 포장 조건에서 파종기(최초 파종 일 4월25일, 최종 파종일 6월 5일) 이동에 따른 온도와 일장 변화가 출엽 및 출수기 변화에 미치는 영향을 검토하여, 일장에 따른 최종엽수 추정모델을 설정하였으며, 이 모델과 온도에 따른 출엽속도 모델을 결합하여 출수기 예측모델을 설정하여 모델의 출수기 추정 정확도를 검증하였다. 1. 포장에서는 4월 25일 이후 파종기가 늦을수록 생육기간 중 평균기온은 높아진 반면, 포장과 인공기상실 양 조건에서 일장감응기간(6엽기부터 유수분화기)중의 평균일장은 짧아졌다. 이에 따라 일장만 관여한 인공기상실에 비해 온도와 일장이 함께 관여한 포장에서 파종시기에 따른 출수소요일수 단축정도가 크게 나타났다. 2. 일장감응기간의 일장이 길어짐에 따라 최종엽수(FNL)가 증가하였으며, 이 관계는 다음과 같은 Rational 함수로 잘 표현이 되었고($R^2$=0.98),이를 광안벼의 최종엽수 추정모델로 설정하였다. 여기서 D는 일장이며, a,b,c는 상수로서 각각 14.694, -0.992, -0.068로 추정되었다. 3.온도에 따른 출엽속도 모델과 일장에 따른 최종엽수 모델로 구성된 출수기 예측 모델을 구성하였으며, 모델 설정에 이용되지 않은 포장실험 자료를 이용하여 검증한 결과 추정된 출수기는 예측오차가 1-2일로 추정 정확도가 높았다.

• 가정과삶의질연구
• /
• 제14권3호
• /
• pp.211-222
• /
• 1996

The purpose of this study is to classify the expenditure behaviors of housewives into some types and to identify the characteristics of the types focucing on diverse expenditure behaviors of urban households. In this study it is assumed that the expenditure behaviors are classified by there factors-(1)the orientation of money saving (2)the orientation of time saving and (3)the orientation of others. The present study suggests following three questions. (1). Can the expenditure behaviors of urban housewives be classified according to the orientation of money saving the orientation of others? (2) What distictions exist among the types? (3) Which variables are useful in classifying the expenditure behaviors? For empirical analysis the data of the study was collected from 650 housewives living in Seoul. The statistical methods adopted for data analysis are frequency percentage mean Pearson's correlation coefficient factor analysis cluster analysis one way ANOVA Duncun's multiple ran e test and discriminant analysis. As the major findings 4 types were extracted, According to the level of each dimensions the names for the each type were given as "the type of attaching importance to money saving" "the type of attaching importance to time and appearance" "the type of attaching importance to money saving and time" "the type of attaching importance to money saving and time" "the type of attaching importance to money saving and time" "the type of attaching importance to money saving and appearance" In "the type of attaching importance to money saving" the significant portion of housewives have high school degrees and compared with other types this type includes more husbands having sales and service job 55% of housewives of "The type of attaching importance to time and appearance" have graduate or higher degrees. The significant part of earned incomes range from 3 million won to 5 million won. The rate of housewives employed in the professional job is higher than other types. In "The type of attaching importance to money saving and time" the rate of the employment of housewives in this type is the highest among the types. In "The type of attaching importance to money saving and appearance" the significant portion of housewives have graduate degrees. In the jobs of he spouses the management job is major. The consciousness of belonging to the middle class is higher than other types. In this type the level of education is high but that of income is not. The result of the discriminant analysis says that the earned income and the consciousness of belonging to a calss are the most critical variables to classify the expenditure behaviors into 4 type The accuray of the classification of the discrimination equation composed of these variables is 47,5% The accuracy is improved by 10%.

• 한국임상수의학회지
• /
• 제34권5호
• /
• pp.330-334
• /
• 2017

The aim of this study was to establish an injection protocol of a test bolus and a main bolus of contrast material for computed tomographic pulmonary angiography (CTPA) for visualizing optimal pulmonary arteries in normal beagle dogs. CTPA using a test bolus method from either protocol A or B were performed in each of four normal beagle dogs. In protocol A, CTPA was conducted with a scan duration for around 8 s, setting the contrast enhancement peak of the pulmonary trunk in the middle of the scan duration. The arrival time to the contrast enhancement peak was predicted from a previous dynamic scan using a test bolus (150 mg iodine/kg) injected with the same injection duration using for a main bolus (450 mg iodine/kg). In protocol B, CTPA was started at the predicted appearance time of contrast material in the pulmonary trunk based on a previous dynamic scan using a test bolus injected with the same injection rate as a main bolus. CTPA using protocol A showed the optimal opacification of the pulmonary artery with pulmonary venous contamination. Proper CTPA images in the absence of venous contamination were obtained in protocol B. CTPA with a scan duration for 8 s should be started at the appearance time of contrast enhancement in the pulmonary trunk, which can be identified exactly when a test bolus is injected at the same injection rate used for the main bolus.