• Human Ecology Research
• /
• v.61 no.3
• /
• pp.493-503
• /
• 2023

Since ISO 20471 regulations(2013) were enacted, high-visibility clothing made of fluorescent fabric and retroreflective materials has been standardized to distinguish the wearers from the surrounding background in a dark place and to protect them. Accordingly, we made high-visibility safety clothing based on the international standards, and examined the positions of the retro-reflective materials on the attached sites to evaluate the suitability of the positions, by 3 types of safety clothing and the body regions when the wearers work or move. Two retro-reflective films of 5cm-horizontal lines were attached to the front/back of the upper-wear, and the lower-wear. Vertical lines were attached from the shoulder to the horizontal waistline. To analyze the motion in 3-dimension, we took pictured infrared-reflective markers on the retro-reflective film covered with yellow-tape on the front-side when 6 subjects wearing experimental garments performed 6 types of motions. According to the metronome tempo, the motions were performed for 30 seconds and repeated 6 motions ①~⑥ by 3 experimental clothing. Among the 6 motions, significant differences in the appearance rate of the markers by body region during the motions were found in 5 types except for motion ③. Significant differences by the post-hoc test were shown in motions ④ and ⑥ as well. Therefore, for high-visibility safety clothing, it is necessary to anticipate the worker's motion and consider the attaching position of the retro-reflective material. It is considered desirable to attach the retro-reflective materials to several places where the clothing is hard to wrinkle.

• Korean Journal of Veterinary Service
• /
• v.15 no.1
• /
• pp.1-6
• /
• 1992

A survey on the dosage optimal time for the bovine fascioliasis was carried out from Jan. 1987 to Dec. 1990. The results were summarized as follows ; 1. The mean infection rate was 27.7% (1,662 heads were infected out of 3,247 heads In 205 herds). A seasonal infection rate was winter (34.6%) >spring(32.5%) >summer(24.7%) > autumn(22.8%) 2. In the density of the fasciola spp. egg of infected bovine feces remarks 79.6% on the range below 10. 3. The density of fasciola spp. egg is not directly proportinal to the infection rate, and remarks on the range from 5 to 20. 4. In the herds dosed vermifuge the appearance of the fasciola spp. egg is as follows ; 1∼3 months show 3.8% and 4∼6 months 8.5% 5. The dosage optimal time for the bovine fasciliasis is as follows ; 1) According to the monthly infection rate the first dosage optimal time is Dec and Feb and the second-Jun and Aug. 2) In the herd dosed vermifuge the dosage optimal time is to dose twice by 60 days interval after 3∼4 months from previous dosage.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.2
• /
• pp.303-317
• /
• 2010

This study helps in the production of brassieres suitable for female adults by researching the actual wearing conditions and purchasing status, satisfaction rate, and preferences of female college students in their early 20's. The collected data was analyzed by a SPSSWIN 13.0 Program and the results of the research are as follows. 1. There is a noticeable difference between the breast satisfaction rate and breast size, in addition the satisfactory rate was higher in the normal breast size or a little ample size than in the very small or very big size. According to the shape, the satisfactory rate for the breast appeared to be high in the case of the recognition and evaluation of the hemisphere type than the flat, cone, pop out, and downward type. 2. For fitness, the looseness at the top of the cup (pressed between the breasts at the upper part of the front middle), pressing and looseness at the upper sides of the cup, inappropriate size of the cup, tightness of the wings, tightness at the bottom round of the breasts, the narrow width of the wire, wide space of the shoulder strings, and the sliding of the shoulder strings had problems that needed improvement. 3. The major priorities for purchasing brassieres are size, fitness, and aesthetic qualities. As a result, the size and the fitness are more important than the trend or decorations since the brassiere has the function to support the breasts that shows that hygiene and sanitation are recognized as an important standard for undergarment selection. The size and the fitness are important factors regardless of breast types in the examination of the selection standards of the brassieres for each breast type, but the cone and hemisphere types have higher preferences for design; the pop out type has more considerations for the material of the cloth. The result show that appearance is more important for smaller breasts, but the functionality of the brassier is more important than the appearance for medium and larger breast sizes.

• Korean Journal of Environmental Agriculture
• /
• v.22 no.4
• /
• pp.294-299
• /
• 2003

The seeds of naturally growing Heteropappus hispidus (Thunb.) were treated by nine different doses (0, 10, 20, 40, 80, 120, 160, 200, 300, 400 Gy) of gamma rays to investigate their germination rate and to quantity the characteristics of their germinated plants as like as leaf appearance and length, the formation rate of anthocyanin color in stem 30 days after germination, the formation rate of rosette leaf and multi-shoot, the flowering and seed-bearing, and shoot length. The germination rate at least up to 120Gy was not greatly affected but was rapidly decreased at over 160Gy. It seemed that lethal dose ($LD_{50}$) of germination was 160Gy. The leaf appearance and growth was also inhibited, but the formation rate of anthocyanin color in the flower stem was enhanced up to 30% with dose. The rosette plants were observed in plants irradiated with higher than 40Gy. Multi-shoots were developed over 80Gy. For a short shoot length and bundle of thin stem, it was considered that they can be selected as the potential pot flower plants, through genetic fixation. In particular, it was suggested that the formation of anthocyanin color in flower stem, rosette and multi-shoot plants induced by the high dose of gamma rays could be utilized as the morphological markers for the mutant selection of Heteropappus hispidus (Thunb.).

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.78-78
• /
• 2012

In this presentation I will review the expanding thermal plasma chemical vapour deposition (ETP-CVD) technology, a deposition technology capable of reaching ultrahigh deposition rates. High rate deposition of a-Si:H, ${\mu}c$-Si:H, a-SiNx:H and silicon nanocrystals will be discussed and their various applications, mainly for photovoltaic applications demonstrated. An important aspect over the years has been the fundamental investigation of the growth mechanism of these films. The various in situ (plasma) and thin film diagnostics, such as Langmuir probes, retarding field analyzer, (appearance potential) mass spectrometry and cavity ring absorption spectroscopy, spectroscopic ellipsometry to name a few, which were successfully applied to measure radical and ion density, their temperature and kinetic energy and their reactivity with the growth surface. The insights gained in the growth mechanism provided routes to novel applications of the ETP-CVD technology, such as the ultrahigh high growth rate of silicon nanorystals and surface passivation of c-Si surfaces.

• Proceedings of the IEEK Conference
• /
• 2001.06c
• /
• pp.73-76
• /
• 2001

We propose a new method for image coding that it is based on highly related property between a spatial image and wavelet transform image. The characteristics have an important role in the design of proposed algorithm. This algorithm for image coding is to obtain high compression rate at low bit rate. The other side, the high activity regions are related to significant coefficients which give much influence to image reconstruction, because they mean the important factor to represent the appearance of images such as edge or boundary. For some images with low activity, we can obtain the reconstructed image with near to 30 dB at 150: 1 compression ratio.

• Proceedings of the Korean Society of Veterinary Pathology Conference
• /
• 2003.10a
• /
• pp.54-54
• /
• 2003

Malignant fibrous histiocytomas (MFHs) is the most common type of soft tissue sarcoma in the old animal with a aggressiveness, a high local recurrence rate and significant metastatic rate, which associated with a poor prognosis. In most histologic and immunohistological studies, the tumor cells raised from a fibroblastic and/or myofibroblastic phenotype, presumably from undifferentiated mesenchymal cell origin. MFHs are usually firm and invasive, arising in the subcutis; metastasis depends on tumor grade (many are grade 3) [1,2]. The primary tumor cells are pleomorphic, varying in appearance from fusiform to round. Often nucleoli are prominent and irregular [5]. Extracellular amorphous eosinophilic material may be prominent and likely represents reactive collagen production by the tumor [5]. (omitted)

• Fibers and Polymers
• /
• v.6 no.4
• /
• pp.277-283
• /
• 2005

In order to prepare high molecular weight poly(methyl methacrylate) (PMMA)/silver nanocomposite microspheres, methyl methacrylate was suspension-polymerized in the presence of silver nanoparticles at low temperature with 2,2'-azobis(2,4-dimethylvaleronitrile) as an initiator. The rate of conversion was increased by increasing the initiator concentration. When silver nanoparticles were added, the rate of polymerization decreased slightly. High monomer conversion (about $85\%$) was obtained in spite of low polymerization temperature of $30^{\circ}C$. Under controlled conditions, PMMA/silver microspheres with various number-average degrees of polymerization (6,000-37,000) were prepared. Morphology studies revealed that except for normal suspension microspheres with a smooth surface, a golf ball-like appearance of the microspheres was observed, due to the migration and aggregation of the hydrophilic silver nanoparticles at the sublayer beneath the microsphere's surface.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.10
• /
• pp.1293-1302
• /
• 2001

It is generally known that radial vane blowers with vaneless diffuser may generate mostly only a rotating stall but backward curved vane blowers may do both an impeller and a diffuser rotating stalls. In this study, it was found from the numerical and experimental results that the diffuser rotating stall does not appear in a radial vane because of the suppression for the diffuser stall appearance by occurring of impeller rotating stall in a large flow rate coefficient. The diffuser rotating stalls occurring when the width of diffuser is broaden fur a backward curved vane blower are classified definitely by the diffuser flow rate coefficient defined by adopting the varying diffuser width.

• Journal of the Korean Society of Safety
• /
• v.21 no.1 s.73
• /
• pp.59-64
• /
• 2006

In this study, adsorption characteristics of PCBs on granular activated carbon were experimentally investigated in a batch reactor and in a fixed bed reactor. Granular activated carbon removed above 98.4% of initial concentration, 1000mg/L, of PCBs. It was estabilished that the adsorption equilibrium of PCBs on granular activated carbon was more successfully fitted by Freundlich isotherm equation in the concentration range from 1 to 1000mg/L. Because Freundlich parameter, ${\beta}$ is 0.346, removall treatment of PCBs by activated carbon accounts for the fact that toxicity reduction can be achieved through this process. Appearance time of breakthrough curve is faster with the increase flow rate and inflow concentration of liquid. The utility of granular activated carbon is enhanced with the increase of bed height and with the decrease of inflow rate.