• 한국세라믹학회지
• /
• 제41권9호
• /
• pp.647-652
• /
• 2004

In aqueous tape casting of alumina slurry systems, the relationships between the suspension compositions and the defects of the dried tapes were discussed. The suspensions compositions were controlled with the ratios of the solids, water and organics binder contents. The effects of the thickness of dried tape and kinds of binder system were also examined. In the defect free region, the apparent viscosity showed nearly same value due to the count balancing effect of solid and organic binder content on the apparent viscosity. When water content was constant, increasing solid led to decrease of organic binder content. The defect free region was narrowed with increasing of casting thickness. When linear type acrylic emulsion binders system (D1000 and D 1035) were used, defect free zone formed the belt type in the triangle of solid, water and organic binder content according to the line of constant water contents. However the defect free region was not found in the cross-link type emulsion binder system (D 1050).

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1775-1780
• /
• 2003

A hybrid finite element analysis was used to analyze the influence of ring gear rim thickness and spline number on the static properties of an epicyclic gear system with manufacturing errors. Both of these parameters affected the bearing force and critical stress. The effect of changes in the rim thickness on the load sharing between the gears depended on the type of manufacturing error. Ring flexibility improved the load sharing between planetary gears only in systems with planet tooth thickness or planet tangential errors; for other types of error, ring flexibility worsened the load sharing. To improve load sharing, rim thickness and spline number should be controlled within a specific range. The effect of the ring gear boundary condition was more apparent in a system with errors than in a normal system.

• Composites Research
• /
• 제23권2호
• /
• pp.1-9
• /
• 2010

본 연구는 실린더 내부가 경사가능재료로 코팅된 두꺼운 벽을 가진 실린더의 겉보기 파괴인성치를 해석한 것이다. 실린더는 내부로부터 반경방향의 단일 모서리 균열이 내재되어 있으며, 균열면과 내면에는 내압을 받고 있는 것으로 가정하였다. 소결온도로부터 냉각 결과 균일한 열팽창계수로 인해 실린더에는 비적합 고유스트레인이 생성되었다. 기존의 연구에서 소개된 응력확대계수 평가법에 기초해 겉보기 파괴인성치를 계산하였다. 본 연구에서는 TiC/$Al_{2}O_{3}$ FGM 코팅된 실린더를 사용하였고 겉보기 파괴인성치의 수치적인 결과를 도식화하였다. 재료분포프로파일, 실린더 벽 두께, 적용온도와 코팅두께등이 겉보기 파괴인치에 미치는 영향이 상세히 조사되었으며, 이러한 모든 인자는 실린더의 겉보기 파괴인성치를 조절하는데 중요한 역할을 하는 것으로 밝혀졌다.

• 한국안전학회지
• /
• 제13권4호
• /
• pp.79-86
• /
• 1998

The effect of specimen thickness on fatigue crack growth behavior has been carried out by compact tension specimens of thickness of 3mm, 10mm and 25mm for maraging steel and Al 7075-T6. The closure points were determined during the test by means of a clip-gage situated at the notch mouth. Specimen thickness have no apparent influence on the fatigue crack growth rate of maraging steel, but the crack growth rate of 25mm thickness specimen for Al 7075-T6 is faster than that of 3 and 10mm specimens. The difference of crack growth rates can be successfully explained by considering the different stress state of plane strain and plain stress due to the variation of specimen thickness. Also the crack opening ratio of 25mm specimen is greater than those of 3 and 10mm specimens. When a side groove is introduced in a 10mm specimen, the crack growth rate is approximately similar to that of 25mm specimen. The effective thickness expression of $B_e=B_o-(B_o-B_N)^2B_o$ is the most appropriate to evaluate the crack growth rate of side-grooved specimen. Fatigue crack growth rates can be well described by $\Delta K_{eff}$ of the crack closure points in regardless of all thickness and side-grooved specimens.

• 대한기계학회논문집A
• /
• 제27권11호
• /
• pp.1949-1957
• /
• 2003

A hybrid finite element analysis was used to analyze the influence of ring gear rim thickness and spline number on the static properties of a planetary gear system with manufacturing errors. Both of these parameters affected the bearing force and critical stress. The effect of changes in the rim thickness on the load sharing between the gears depended on the type of manufacturing error. Ring flexibility improved the load sharing between planetary gears only in systems with planet tooth thickness or planet tangential errors; for other types of error, ring flexibility worsened the load sharing. To improve load sharing, rim thickness and spline number should be controlled within a specific range. The minimum rim thickness limit should be determined considering not only the critical stress but also the load sharing. The effect of the ring gear boundary condition was more apparent in a system with errors than in a normal system.

• 한국의류학회지
• /
• 제38권3호
• /
• pp.397-403
• /
• 2014

In this study, various types of Jumchi Hanji were made to develop shroud materials as a new use for Hanji. The properties of Hanji (basis weight, thickness, apparent density, bulk, tensile strength, wet tensile strength, elongation ratio, tear strength, bursting strength, and folding endurance) are measured. In all cases, Jumchi Hanji had a higher thickness, lower apparent density and higher bulk than Hanji because pores in the intervals of mulberry fiber are composed of bulk. So, it is considered to carry a value as a textile material. As for the results of the strength analysis of Jumchi Hanji, Jumchi technique enhances 25% of elongation ratio, which is regarded the most important role in textiles and 35% of bulk. Moreover, it was shown that it enhanced overall strength. In conclusion, it implies the possibility of applying it as a shroud material. Jumchi Hanji is thought to have enough potential to be developed as a material to carry the characteristics of Hanji in the textile market.

• 한국지반신소재학회논문집
• /
• 제20권1호
• /
• pp.21-34
• /
• 2021

단일지반에서의 경험토압을 다층지반에 적용할 때 각 지층이 토압에 기여하는 효과를 고려할 수 없는 문제 등을 해결하고자 국내외에서 지반굴착시 측정된 토압을 조사하고 분석하였다. 다층지반의 토압은 단일지반의 경험토압과 상이하고, 대표 토질이 아닌 지층의 토압 기여 효과를 고려할 수 없음을 확인하였다. 본 연구에서는 기존의 단일지반에 대한 경험토압 산정방법을 다층지반까지 확장하여 단일지반과 다층지반 모두 적용 가능한 방법을 제안하고 검증하였다. 제안방법은 굴착심도 0.1Z/H 이하에서 실측값에 더 근접한 토압을 예측하는 등 기존 단일지반의 토압보다 예측 신뢰도가 우수한 것으로 평가되었다. 제안방법 중 주동상태에서의 파괴면적비를 고려하는 방법이 지반공학적 타당성을 갖추고도 실측토압과 가장 유사한 결과를 도출하였다. 또한, 제안방법의 적용성을 확인하고자 실제 설계사례에 대해 제안방법과 기존 방법의 설계 결과를 비교 분석하여 제시하였다.

• Korea-Australia Rheology Journal
• /
• 제14권1호
• /
• pp.11-16
• /
• 2002

Cephalosporium acremonium is a filamentous microorganism producing cephalosporin C. The morphological differentiation of C. acremonium in submerged culture is closely related with the rheological properties of culture broth and production of cephalosporin C. In this study, the rheological and morphological properties of culture broth of C. acremonium were investigated. In the seed broths of shake-flask and fermenter culture, the Herschel-Berkley equation was in excellent agreement with experimental results in the whole range of shear rate. In the seed broths of shake-flask culture, morphological differentiation into arthrospores affected to changes of apparent viscosity. But results in the fermenter culture, morphological factors such as mean hyphal thickness and the number of tips gave more effect on changes of apparent vitacosity than differentiation into arthrospores. Overall, it suggested that the morphological parameters measured by image analysis can be used as a good parameter to indicate the rheological properties of culture broth of C. acremonium M25.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 The Korea-Japan Joint Symposium
• /
• pp.77-78
• /
• 2003

The surface evenness and texture of textile products are closely related with the irregularity of yarn thickness which has an important role to influence the quality and the process efficiency. For measuring yam thickness the capacitive method is known to dominate the market, delivering results that are in a close relation with the mechanical properties of yarn, while the optical method offers information that seems related rather with the apparent quality of yarn. If a thin light beam is applied for the optoelectrical measurement, it is very possible that this method can provide us with important information which is not obtainable from the capacitive type measurement. This paper reports the results of a study about the yarn thickness and its variation on the basis of a new measurement system using a laser slit beam. Analysis of the new system confirms that we can extract new information on the yarn irregularity ranging into much short wavelengths. Even the visual shade created by the yam doubling and twisting can be measured and represented well. Depending on the yam types, the thickness measurements show their own characteristics.

• 농업과학연구
• /
• 제47권4호
• /
• pp.859-865
• /
• 2020

A total of 100 growing pigs (25.66 ± 1.55 kg) were used in a 16-week feeding trial. Pigs were randomly distributed into two treatment groups on the basis of body weight and sex. There were ten replicate pens per treatment, with five pigs (three barrows and two gilts) per pen. The dietary treatments for this trial were as follows: 1) Basal diet (CON) and 2) T1 (γ-aminobutyric acid, GABA), CON + 100 mg·kg-1 GABA. During weeks 0 to 6, the feed efficiency (G : F) in the T1 group was higher (p < 0.05) than that in the CON group, but no improvements in the average daily feed intake (ADFI) and average daily gain (ADG) were noted (p > 0.05). During the experimental period, the final body weight (BW) was improved (p < 0.05). However, no differences (p > 0.05) were noted in the apparent total tract digestibility (ATTD) of dry matter (DM) nitrogen (N). Meanwhile, there were no significant differences (p > 0.05) observed in the backfat thickness among the treatment groups. These results therefore indicate that supplementation with GABA may improve the overall growth performance but may not lead to differences in the nutrient digestibility and backfat thickness in growing-finishing pigs.