• 제목/요약/키워드: apparent power

검색결과 273건 처리시간 0.027초

Aqueous Polymerization of Acrylamide Initiated by Periodic Acid and Its Kinetics

  • Cho, Myung-Rae;Han, Yang-Kyoo;Kim, Bum-Sung
    • Macromolecular Research
    • /
    • 제8권4호
    • /
    • pp.147-152
    • /
    • 2000
  • The activity of periodic acid as an initiator for the polymerization of acrylamide in aqueous medium was investigated. The rate of polymerization was found to be proportional to the monomer concentration to the 1.5th power in the range of 1.41-5.64 mol/L. The reaction order to the periodic acid concentration was 0.49, which indicated a bimolecular mechanism for the termination reaction in the range of 0.5-4.0$\times$10$\^$-2/ mol/L. Propagation rate increased with raising the temperature according to an Arrhenius expression resulting in the exhibition of an apparent activation energy of 87.8 kJ/mol in the temperature range of 60-80$\^{C}$. The addition of hydroquinone as a radical scavenger stopped the polymerization of acrylamide initiated by periodic acid. These results support that the polymerization proceeds via a radical chain mechanism .

  • PDF

THERMALLY INDUCED PHASE SEPARATION IN TERNARY POLYMER SOLUTION

  • Jung, Bum-Suk;Kang, Yong-Soo;Jones, Richard-A.L.
    • 한국막학회:학술대회논문집
    • /
    • 한국막학회 1999년도 The 7th Summer Workshop of the Membrane Society of Korea
    • /
    • pp.79-82
    • /
    • 1999
  • Using Small Angle Light Scattering (SALS), the effect of quench depth on the kinetics of phase separation for ternary solution blends was investigated. The system was composed of two polymers (polystyrene and polybutadiene) and a solvent (toluene). The analyses of the early stage of phase separation were based of the Cahn-Hilliard theory [1,5]. Apparent diffusion coefficients and the fastest mode of fluctuations were evaluated, when quench depth of the system were varied near the critical composition of polymer. In the late stage of phase separation, the domain growth showed a power law with the 1/3 exponent, i.e. $q_m(t)~t^{-1/3}$. For comparison between real images and scattering profiles with time, the image of phase domains with time were obtained by using Laser Confocal Scanning Microscopy (LSCM).

  • PDF

저온 준안정상 $ZrO_2$의 안정화 (Stabilization of Low-Temperature Metastable Phase of $ZrO_2$)

  • 오영제;정형진;이희수
    • 한국세라믹학회지
    • /
    • 제27권5호
    • /
    • pp.613-618
    • /
    • 1990
  • The pure and 6mol% MgO-doped ZrO2 powders were prepared by hot petroleum drying method. The power characterization of homogeneous fine powder was indentified by the method of thermal analysis, BET and electron microscope. The transformation, content of t-ZrO2, crystallite size and apparent strain were measured by X-ray diffraction technique. The prepared powders were transformed in order of amorphouslongrightarrowmetastable cubic ZrO2longrightarrowmetastable tetragonal ZrO2longrightarrowstable monoclinic ZrO2 by a adequate heat treatment. The stabilization of metastable phase can be discussed in terms of energetial concept ; the difference of surface energy and internal strain in particle.

  • PDF

폴리머를 이용한 하수관로에서의 퇴적물 제거 기법 (Removal Method for a Deposit at Sewerage with Polymer Additives)

  • 전찬열;오율권;황세준
    • 한국안전학회지
    • /
    • 제17권4호
    • /
    • pp.153-159
    • /
    • 2002
  • This experimental study is aimed to increasing the velocity in the sewerage and also development of easy removal method for a corrosion and sand in the flow pipe. And the result by the increasing the out flow per unit time, diameter of sewerage pipe is becoming small size, cut down the construction fee and the same time reducing the tubulent flow pattern in the flow pipe. As a result of detected experimental velocity signal from the probe in the test wall surface, reducing the pump power and increasing the out flow unit time. Apparent water velocity decreases as the value of void ratio increases depends on the varies center of pipe.

부분방전 분석장치의 설계 및 제작 (Design and Fabrication of a Partial Discharge Analyzer)

  • 송재용;문승보;차명수;길경석
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
    • /
    • pp.1517-1518
    • /
    • 2006
  • This paper describes the design and fabrication of a partial discharge(PD) analyzer to evaluate insulation performance for low-voltage electrical and electronic devices. The analyzer consists of an adjustable AC power supply, a coupling network, an amplifier, a shielding encloser, a sample-hold (S/H) circuit and a data acquisition (DAQ) board. The analyzer holds the height of PD pulse for $10{\mu}s$ by the S/H circuit, and this makes possible to measure PD pulses having fast rise and short duration by a low speed analog-to-digital (A/D) converter. The data are transmitted to the personal computer through the DAQ board, and the designed analysis program calculate apparent charges, discharge inception and extinction voltages.

  • PDF

A new approach to determine batch size for the batch method in the Monte Carlo Eigenvalue calculation

  • Lee, Jae Yong;Kim, Do Hyun;Yim, Che Wook;Kim, Jae Chang;Kim, Jong Kyung
    • Nuclear Engineering and Technology
    • /
    • 제51권4호
    • /
    • pp.954-962
    • /
    • 2019
  • It is well known that the variance of tally is biased in a Monte Carlo calculation based on the power iteration method. Several studies have been conducted to estimate the real variance. Among them, the batch method, which was proposed by Gelbard and Prael, has been utilized actively in many Monte Carlo codes because the method is straightforward, and it is easy to implement the method in the codes. However, there is a problem when utilizing the batch method because the estimated variance varies depending on batch size. Often, the appropriate batch size is not realized before the completion of several Monte Carlo calculations. This study recognizes this shortcoming and addresses it by permitting selection of an appropriate batch size.

파워 조절 방법에 따른 풍력 터빈의 방사 소음 특성 (Characteristics of Noise Emission from Wind Turbine According to Methods of Power Regulation)

  • 정철웅;정완섭;신수현;전세종;최용문;정성수
    • 한국소음진동공학회논문집
    • /
    • 제16권8호
    • /
    • pp.864-871
    • /
    • 2006
  • In the development of electricity generating wind turbines for wind farm application, only two types have survived as the methods of power regulation; stall regulation and full span pitch control. The main purpose of this paper is to experimentally identify the characteristics of noise emission of wind turbines according to the power regulation types. The sound measurement procedures of IEC 61400-11 are applied to field test and evaluation of noise emission from each of 1.5 MW and 660 kW wind turbines (WT) utilizing the stall regulation and the pitch control for the power regulation, respectively. Apparent sound power level, wind speed dependence, third-octave band levels and tonality are evaluated for both of WTs. It is observed that equivalent continuous sound pressure levels (ECSPL) of the stall control type of WT continue to increase with increasing wind speed whereas those of the pitch control type of WT show less correlation with wind speed. These observed characteristics are believed to be due to the different airflow patterns around the blade between the stall regulation and the pitch control types of WT; the airflow on the suction side of blade in the stall types of WT are separated at the high wind speed. It is also found that the 1.5 MW WT using the stall control emits lower sound power than 660 kW one using the pitch control at wind speeds below 8m/s, whereas sound power of the former becomes higher than that of the latter in the wind speed over 8m/s. This wind-speed dependence of sound power leads to the very different noise omission characteristics of WTs depending on the seasons because the average wind speed in summer is lower than 8m/s whereas that in summer is higher. Based on these experimental observations, it is proposed that, in view of environmental noise regulation, the developer of wind farm should give enough considerations to the choice of power regulation of their WTG based on the weather conditions of potential wind farm locations.

배주스 농축액의 리올로지 특성 (Rheological Properties of Pear Juice Concentrates)

  • 최희돈;김경탁;홍희도;이부용;김성수
    • 한국식품과학회지
    • /
    • 제27권6호
    • /
    • pp.845-851
    • /
    • 1995
  • 배 가공시 그 이용성을 증진시키기 위하여 혼탁 및 청징주스 농축액의 리올로지 특성을 조사, 비교한 결과는 다음과 같다. 각각의 농축액들은 뉴톤유체에 가까운 흐름특성을 나타내었으며, Power law model과 Herschel-Bulkley model에 적용되었다. 유동지수는 농도에 대해서는 뚜렷한 상관관계를 보이지 않았으나 측정온도에 대해서는 온도가 증가할수록 감소하여 의사가소성을 띠었으며, 점조도지수는 농도가 증가할수록, 온도가 감소할수록 증가하였으며, 항복력은 무시할 수 있는 정도였다. Arrhenius식에 의해 구한 전단속도 1500 1/s에 대한 점도의 유동활성화에너지는 농도가 $15^{\circ}Brix$에서 $60^{\circ}Brix$로 증가함에 따라 혼탁주스 농축액의 경우 $1.5104{\times}10^4$에서 $3.4141{\times}10^4\;J/kg{\cdot}mol$로, 청징주스 농축액의 경우 $1.4762{\times}10^4$에서 $3.4963{\times}10^4\;J/kg{\cdot}mol$로 증가하였으며, 지수함수식에 의해 구한 농도의존성 상수인 A는 온도가 $5^{\circ}C$에서 $60^{\circ}C$로 증가함에 따라 혼탁주스 농축액의 경우 0.0789에서 $0.0484^{\circ}Brix^{-1}$로, 청징주스 농축액의 경우 0.0786에서 $0.0476^{\circ}Brix^{-1}$로 감소하였다. 이와같이 혼탁주스 농축액과 청징주스 농축액은 리올로지 특성에 있어 거의 차이가 없었다.

  • PDF

오메프라졸 장용성제제에 대한 생물학적 동등성 평가 (Bioequivalence of Enteric-coated Omeprazole Products)

  • 김종국;정은주;이은진;신희종;이원근
    • Journal of Pharmaceutical Investigation
    • /
    • 제23권1호
    • /
    • pp.41-49
    • /
    • 1993
  • The bioequivalence of two omeprazole enteric-coated products was evaluated in 16 normal male volunteers (age 26-32 yr, body weight 57-75 kg) following single oral administration. Test product was enteric-coated KD-182 tablet (Chong Kun Dang Corp., Korea) and reference product was $Rosec^{\circledR}$ capsule containing enteric-coated pellets of omeprazole (Yuhan Corp., Korea). Both products contain 20 mg of omeprazole. One tablet or capsule of the test or the reference product was administered to the volunteers, respectively, by randomized two period cross-over study ($2\;{\times}\;2$ Latin square method). Average drug concetrations at each sampling time and pharmacokinetic parameters calculated were not significantly different between two products(p>0.05); the area under the concentrationtime curve to last sampling time (8 hr) $(AUC_{0-8hr})$ $(1946.5{\pm}675.3\;vs\;2018.3{\pm}761.6\;ng{\cdot}hr/ml)$, AUC from time zero to infinite $(AUC_{o-\infty})$ $(2288.6{\pm}1212.8\;vs\;2264.9{\pm}1001.3\;ng{\cdot}hr/ml)$, maximum plasma concentration $(C_{max})$ $(772.5{\pm}283.3\;vs\;925.8{\pm}187.7\;ng/ml)$, time to maximum plasma concentration $(T_{max})$ $(2.38{\pm}1.06\;vs\;2.34{\pm}1.09\;hr)$, apparent elimination rate constant $(k_{\ell})$ $(0.5339{\pm}0.2687\;vs\;0.5769 {\pm}0.2184\;hr^{-I})$, apparent absorption rate constant $(k_a)$ $(1.1536{\pm}0.5278\;vs\;0.9739{\pm}0.9507 hr^{-1})$ and mean residence time (MRT) $(3.13{\pm}0.73\;vs \;3.41{\pm}1.04\;hr)$. The differences of mean $(AUC_{0-8hr})$, $C_{max}$, $T_{max}$ and MRT between the two products (3.69, 19.83, 1.32 and 8.99%, respectively) were less than 20%. The power $(1-{\beta})$ and treatment difference $(\triangle)$ for $AUC_{o-8hr}$ $C_{max}$ and MRT were more than 0.8 and less than 0.2, respectively. Although the power for $T_{max}$ was under 0.8, $T_{max}$ of the two products was not significantly different each other(p>0.05). These results suggest that the bioavailability of KD-182 tablet is not significantly different from that of $Rosec^{\circledR}$ capsule. Therefore, two products are bioequivalent based on the current results.

  • PDF

토마토케찹 현탁액의 리올로지 특성과 점성예측모델 (Rheological Characteristics and Viscosity Prediction Models of Tomato Ketchup Suspensions)

  • 하성권;최용희
    • 한국식품과학회지
    • /
    • 제20권6호
    • /
    • pp.812-819
    • /
    • 1988
  • 토마토케찹의 리올로지 성질을 온도 $30-90^{\circ}C$, 농도 15-50% 전단속도 $0-250sec^{-1}$띤 범위에서 Brabender viscotron를 사용하여 측정한 결과는 다음과 같다. 토마토케찹은 전단속도 $0-210sec^{-1}$에서 의가소성을 나타내며, 항복응력을 가지는 Binghampseudoplastic으로 시간의존성을 나타내는 thixotropic 식품이었다. 전단속도 $0-210sec^{-1}$, 온도 $30^{\circ}C$, 농도 33%의 경우 유동지수, 점조도지수 및 항복응력은 각각 0.2131, 22.5047$(Pasec^{-n})$ 및 8.5443(Pa)이었다. 토마토케찹의 온도 및 농도에 따른 겉보기 점도 관계식은 각각 Andrade및 Power type식으로 나타낼 수 있었으며, 또한 온도와 농도에 따른 겉보기점도 관계식은 지수함수 모델로 표현할 수 있었다. 활성화 에너지는 농토 15,20,30,33,40 및 50%에서 3.973, 4.985, 5.078, 5.226, 5.357 및 7.655 kcal/g mole이었다.

  • PDF