• 제목/요약/키워드: apparatus

검색결과 4,311건 처리시간 0.032초

개발된 3D Display 장치를 이용한 사위검사법과 기존 사위검사법으로 측정한 사위량 비교에 관한 연구 (A Comparative Study on Quantity of Phoria between New Phoria Measurement with 3D Display and Existing Methods)

  • 강석현;홍형기
    • 한국안광학회지
    • /
    • 제18권3호
    • /
    • pp.313-320
    • /
    • 2013
  • 목적: 본 논문에서는 3D display 장치를 활용하여 사위량을 측정하는 새로 고안된 사위검사법이 기존의 사위검사법을 분석 및 비교하여 어떠한 차이가 있는지 알아보았다. 방법: 실험은 마독스로드법(Maddox rod), 폰 그라페법(von Graefe) 등 기존 사위검사법 2가지와 새로 고안한 3D편광사위검사법으로 사위량을 측정하였다. 3D편광사위검사법은 기존의 편광렌즈를 활용한 사위검사와 달리 편광렌즈와 시야조리개를 사용하여 완전융합사위제거 상태로 사위량을 측정한다. 이를 위해 세 가지 사위검사법에 모두 사용 가능하도록 새로 고안된 사위검사시표와 이를 표시하는 3D display 장치를 활용하였다. 피검사자는 남녀 12명이며, 사위검사에 영향을 줄 수 있는 사위검사순서를 고려하여 3가지 사위검사의 모든 경우의 순서를 고려하여 세 가지 실험 1세트-1회를 기준으로 총 6회의 실험을 하여 총 72세트의 표본을 얻었다. 양안융합의 제거를 위해 실험조건을 어둡게 했으며, 시표의 RGB색상코드(RGB color code)를 기준으로 (20, 20, 20), 실험실의 조명은 10 lx 이하를 유지하였다. 결과: 실험결과 72세트의 표본 중, 외사위 30세트, 내사위 12세트, 정위 30세트로 분류되었다. 먼저 검사순서에 의한 분석 결과 실험에 영향을 주지 않았다. 사위량의 비교분석 결과, 가장 높은 사위량이 검출된 검사법은 마독스로드법이었으며 3D편광사위검사법이 가장 낮은 사위량이 검출되었다. 각 검사법의 사위량은 차이를 보이고, paired t-test 분석 결과 통계적으로 유의하여 사위량이 3D편광사위검사법<폰 그라페법<마독스로드법 순의 경향으로 검출될 확률이 높다. 결론: 새로 고안된 3D편광사위검사법은 기존 사위검사법보다 상대적으로 낮은 사위량이 검출되었으나 통계적으로 유의한 차이를 보인다. 새로 고안된 3D편광사위검사법은 피검사자의 자연스러운 융합제거와 비교적 안정적인 안위 상태에서 이루어진 검사로 사위량을 검사하는 점에서 의의가 있다.

Stellite bearings for liquid Zn-/Al-Systems with advanced chemical and physical properties by Mechanical Alloying and Standard-PM-Route

  • Zoz, H.;Benz, H.U.;Huettebraeucker, K.;Furken, L.;Ren, H.;Reichardt, R.
    • 한국분말야금학회:학술대회논문집
    • /
    • 한국분말야금학회 2000년도 춘계학술강연 및 발표대회 강연 및 발표논문 초록집
    • /
    • pp.9-10
    • /
    • 2000
  • An important business-field of world-wide steel-industry is the coating of thin metal-sheets with zinc, zinc-aluminum and aluminum based materials. These products mostly go into automotive industry. in particular for the car-body. into building and construction industry as well as household appliances. Due to mass-production, the processing is done in large continuously operating plants where the mostly cold-rolled metal-strip as the substrate is handled in coils up to 40 tons unwind before and rolled up again after passing the processing plant which includes cleaning, annealing, hot-dip galvanizing / aluminizing and chemical treatment. In the liquid Zn, Zn-AI, AI-Zn and AI-Si bathes a combined action of corrosion and wear under high temperature and high stress onto the transfer components (rolls) accounts for major economic losses. Most critical here are the bearing systems of these rolls operating in the liquid system. Rolls in liquid system can not be avoided as they are needed to transfer the steel-strip into and out of the crucible. Since several years, ceramic roller bearings are tested here [1.2], however, in particular due to uncontrollable Slag-impurities within the hot bath [3], slide bearings are still expected to be of a higher potential [4]. The today's state of the art is the application of slide bearings based on Stellite\ulcorneragainst Stellite which is in general a 50-60 wt% Co-matrix with incorporated Cr- and W-carbides and other composites. Indeed Stellite is used as the bearing-material as of it's chemical properties (does not go into solution), the physical properties in particular with poor lubricating properties are not satisfying at all. To increase the Sliding behavior in the bearing system, about 0.15-0.2 wt% of lead has been added into the hot-bath in the past. Due to environmental regulations. this had to be reduced dramatically_ This together with the heavily increasing production rates expressed by increased velocity of the substrate-steel-band up to 200 m/min and increased tractate power up to 10 tons in modern plants. leads to life times of the bearings of a few up to several days only. To improve this situation. the Mechanical Alloying (MA) TeChnique [5.6.7.8] is used to prOduce advanced Stellite-based bearing materials. A lubricating phase is introduced into Stellite-powder-material by MA, the composite-powder-particles are coated by High Energy Milling (HEM) in order to produce bearing-bushes of approximately 12 kg by Sintering, Liquid Phase Sintering (LPS) and Hot Isostatic Pressing (HIP). The chemical and physical behavior of samples as well as the bearing systems in the hot galvanizing / aluminizing plant are discussed. DependenCies like lubricant material and composite, LPS-binder and composite, particle shape and PM-route with respect to achievable density. (temperature--) shock-reSistibility and corrosive-wear behavior will be described. The materials are characterized by particle size analysis (laser diffraction), scanning electron microscopy and X-ray diffraction. corrosive-wear behavior is determined using a special cylinder-in-bush apparatus (CIBA) as well as field-test in real production condition. Part I of this work describes the initial testing phase where different sample materials are produced, characterized, consolidated and tested in the CIBA under a common AI-Zn-system. The results are discussed and the material-system for the large components to be produced for the field test in real production condition is decided. Outlook: Part II of this work will describe the field test in a hot-dip-galvanizing/aluminizing plant of the mechanically alloyed bearing bushes under aluminum-rich liquid metal. Alter testing, the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed. Part III of this project will describe a second initial testing phase where the won results of part 1+11 will be transferred to the AI-Si system. Part IV of this project will describe the field test in a hot-dip-aluminizing plant of the mechanically alloyed bearing bushes under aluminum liquid metal. After testing. the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed.

  • PDF

소 동일성 검사에 적용 가능한 14 Microsatellite marker와 60 Single Nucleotide Polymorphism marker 간의 판별 효율성 비교 (A Comparison of Discriminating Powers Between 14 Microsatellite markers and 60 SNP Markers Applicable to the Cattle Identification Test)

  • 임현태;서보영;정은지;유채경;윤두학;전진태
    • Journal of Animal Science and Technology
    • /
    • 제51권5호
    • /
    • pp.353-360
    • /
    • 2009
  • 14개의 microsatellite (MS) marker를 사용 할 경우 무작위 교배 집단(PI) 가정 하에 $3.43{\times}10^{-27}$의 판별율을 보여 60 개의 single nucleotide polymorphism (SNP) marker에 비해 약 1,000배의 높은 판별 효과를 나타내는 것으로 파악되었다. 그러나, 60개의 SNP marker의 경우 반형매 교배 집단($PI_{half-sibs}$)으로 가정할 경우 $4.69{\times}10^{-20}$과 전형매 교배 집단($PI_{sibs}$)으로 가정 할 경우 $8.02{\times}10^{-12}$으로 14개의 MS marker에 비해 약 10배와 10,000배의 높은 판별 효과를 나타내는 것으로 추정되었다. 이러한 결과는 무작위 교배집단에서는 사용된 marker의 전체 대립유전자수(MS : SNP = 146 : 120)에 의하여 판별효율이 결정되는 반면, 혈연관계가 높은 반형매와 전형매 집단에서는 비슷한 총 대립유전자수일 경우 marker의 수(MS : SNP = 14 : 60)가 많은 경우가 더 높은 판별율을 보이는 것으로 나타났다. 한육우의 경우 소수의 보증 종모우를 이용해 인공수정을 통해 형성 된 거대한 반형매 집단으로 가정하였을 경우 MS와 SNP marker의 판별율은 10배 정도의 차이로 큰 차이를 보이지 않을 것으로 예견되나, likelihood rato를 이용 하는 inclusion 방법에 의하여 부모를 동시에 찾을 확률은 MS marker가 1,000 배 정도 더 효율적인 것으로 나타났다. SNP marker의 장점인 변이의 안정성, 유전자형 분석의 자동화 및 대용량화 등을 한육우의 동일성 검사에 활용하기 위해서는 분석비용 절감 방안과 분석방법 및 장비의 국산화 등 실용 및 상용화적 측면에서의 연구개발이 필요하다고 사료된다.

흰쥐의 뇌 기저동맥에서 CGRP에 의한 혈관 이완반응의 기전에 대한 연구 (Pharmacological Action Mechanism(s) of Vasodilator Effect of Calcitonin Gene-related Peptide in Rat Basilar Arteries)

  • 임병용;홍선화;김치대;이원석;김동헌;홍기환
    • 대한약리학회지
    • /
    • 제32권1호
    • /
    • pp.39-49
    • /
    • 1996
  • 본 실험에서는 흰쥐의 뇌 기저동맥을 이용하여 $K^+$과 U46619에 의한 수축과 세포내 $Ca^{2+}$의 변동을 관찰하고, 이들 반응을 CGRP 전처치시 나타나는 반응과 비교하였다. CGRP (30과 100 nM)는 U46619에 의하여 야기된 수축반응과 세포내 $Ca^{2+}$의 증가반응을 억제시켰으나, $K^+$ (90 mM)에 의하여 나타나는 반응에는 영향을 미치지 아니하였다. 게다가, U46619에 의하여 야기되는 장력에 대하여 세포내 $Ca^{2+}$의 변동 $(F_{340}/F_{380})$을 도표화하여 세포내 $Ca^{2+}$ 농도와 장력의 발생과의 상관관계를 검토하고, 이들 결과를 CGRP 전처치시 나타나는 결과와 비교하였다. CGRP (30과 100 nM) 전처치군에서 얻어진 직선이 오른쪽으로 치우치지는 않으면서 아래쪽으로 이동하는 점으로 볼 때, CGRP가 $Ca^{2+}$에 대한 수축기구의 감수성에는 영향을 미치지 않으면서 세포내 $Ca^{2+}$ 농도를 저하시킴에 의하여 U46619에 의한 근수축반응을 억제시키는 것으로 보여진다. 이러한 CGRP의 효과는 CGRP1 수용체 길항제인 CGRP$(8{\sim}37)$ 분획(100 nM)의 전처치시 현저히 억제되었다. CGRP에 의한 수축력과 세포내 $Ca^{2+}$의 저하는 large conductance $Ca^{2+}$에 의하여 활성화되는 $K^+$ 통로 봉쇄제인 charybdotoxin (100 nM)과 iberiotoxin (100 nM)의 전처치에 의하여 완전하게 역전되었으나, small conductance $Ca^{2+}$에 의하여 활성화되는 $K^+$ 통로 봉쇄제인 apamin (300 nM)과 ATP에 감수성이 높은 $K^+$ 통로 봉쇄제인 glibenclamide (1 ${\mu}M$)에 의해서는 영향을 받지 아니하였다. 이상의 결과로 볼 때 CGRP1 수용체는 $Ca^{2+}$에 의하여 활성화되는 $K^+$ 통로를 개방시킴으로 세포내 $Ca^{2+}$을 감소시켜 뇌 기저동맥의 이완반응을 매개하는 것으로 사료된다.

  • PDF

우리나라 제사공장의 공정 관리실태에 관한 조사연구 (Studies on the Processing and Management Forms of Filatures)

  • 송기언;이인전
    • 한국잠사곤충학회지
    • /
    • 12호
    • /
    • pp.37-45
    • /
    • 1970
  • 1969년도 우리나라 제사공장의 공정관리 실태를 조사분석한 결과는 다음과 같다. 1 춘추잠기 공히 최성일을 포함한 5일간(최성일전후 각 2일)의 출하량이 전공판량의 약 80% 내외이고 최성일의 -3일까지 및 +3일이후의 출하량은 가각 10% 내외이다. 2. 생견의 운반도로상태는 92% 내외가 비포장도로이고 전공장이 구견량의 40% 내외를 40km이상되는 공판장에서 트럭으로 운반하고 있는 실정이므로 생견수송중의 격동에 의한 견질손상을 최소한으로 감소시킬 수 있는 생견의 새로운 포장방법이 청구되어야 할 것이다. 3. 전공장의 22%가 생사품위의 저하요인이 되고 있는 저온건조고만을 설치하고 있는 실정이드로 이들 공장에 대한 열풍건견기의 설치는 시급하다고 본다. 4. 원료견의 가일조제방법은 50% 내외가 정상(1.2.3.4등견), 정하(5.6등견)로 구분하고 있는바 우리나라의 견질성상으로 볼 때 정상(1.2등견), 정중(3.4 등견) 정하(5.6등견)로 구분하여 조제하는 방향으로 개선시켜야 될 것이다. 5. 선제견비율은 다조조사용이 10% 내외 자동조사용이 15% 내외로서 다조용보다 자동용이 높았으며 대 1인당 1일 선견능력은 약 80~100kg이었다. 6. 자견조건은 원료견의 해서가 불량할수록 자견시간 자견압력 및 자견온도가 높았으며 자동조사용 및 옥사조사용의 원료견은 다조조사용의 원료견보다 약자상태이었다. 7. 자동조사가 다조조사보다 1~2$^{\circ}C$의 저온에서 약 2배의 권취속도로 조사하고 있다. 8. 재조온습도는 실내가 $25^{\circ}C$, 67.2%RH 기내가 32.3$^{\circ}C$ 51.9% RH이었고 권취속도는 233m/min 대 1인당 담당창수는 7.5창이었으며 타래의 형태는 전공장이 배인이었다. 9. 제사용수의 용수원은 약 75%가 지하수이고 정수시설이 미비되어 있는 공장이 약 48%인바 이들 공장에 대한 정수시설의 완비는 시급한 과제이다. 10. 대부분의 공장이 자체검사시설로서 검위형, 무척기 Seriplane 검사시설을 보유하고 있다. 11. 진공삼투기는 전공장의 90%이상이 재조공정에서 약 20% 공장이 자견공정에서 활용하고 있다. 12. 제사공정에서 화학약제를 사용하는 공장은 약 21%에 불과하며 사용하는 약제는 대부분의 공장이 자견과정에서는 Seracol "100"을 재조과정에서는 Seracol "500"이었다. 13. 이상의 조사결과를 종합하여 볼 때 공정관리면에서는 각제사공장간에 큰 차이를 나타내고 있으므로 강습회 등을 통한 각공장간의 기술교류는 우리나라 제사업의 생산성을 제고시키는 한 요인이 될것이다.성을 제고시키는 한 요인이 될것이다.

  • PDF

딜라트렌 정(카르베딜롤 25 mg)에 대한 카베롤 정의 생물학적 동등성 (Bioequivalence of Carvelol Tablet to Dilatrend Tablet (Carvedilol 25 mg))

  • 조혜영;이문석;박순철;임동구;문재동;이용복
    • Journal of Pharmaceutical Investigation
    • /
    • 제31권4호
    • /
    • pp.289-295
    • /
    • 2001
  • Carvedilol is an antihypertensive and antianginal compound that combines nonselective beta-adrenoceptor blocking and vasodilation properties and is devoid of intrinsic sympathomimetic activity. The purpose of the present study was to evaluate the bioequivalence of two carvedilol tablets, $Dilatrend^{TM}$ (Chong Kun Dang Pharmaceutical Co., Ltd.) and $Carvelol^{TM}$ (Dae Won Pharmaceutical Co., Ltd.), according to the prior and revised guidelines of Korea Food and Drug Administration (KFDA). The carvedilol release from the two carvedilol tablets in vitro was tested using KP VII Apparatus II method with various different kinds of dissolution media (pH 1.2, 4.0, 6.8 buffer solution, water and blend of PSB80 into water). Eighteen normal male volunteers, $24.22{\pm}1.86$ years in age and $64.81{\pm}4.56\;kg$ in body weight, were divided into two groups and a randomized $2{\times}2$ cross-over study was employed. After one tablet containing 25 mg of carvedilol was orally administered, blood was taken at predetermined time intervals and the concentrations of carvedilol in serum were determined using HPLC method with fluorescence detector. The dissolution profiles of two carvedilol tablets were very similar at all dissolution media. Besides, the pharmacokinetic parameters such as $AUC_t$, $C_{max}$ and $T_{max}$ were calculated and ANOVA test was utilized for the statistical analysis of the parameters using non-transformed and logarithmically transformed $AUC_t$ and $C_{max}$. The results showed that the differences in $AUC_t$, $C_{max}$ and $T_{max}$ between two tablets based on the $Dilatrend^{TM}$ were 2.23%, -2.00% and 0.00%, respectively. Minimum detectable differences $({\Delta})$ at ${\alpha}=0.05$ and $1-{\beta}=0.8$ were less than 20% (e.g., 13.55% and 17.61% for $AUC_t$ and $C_{max}$, respectively). The powers $(l-{\beta})$ at ${\alpha}=0.05$, ${\Delta}=0.2$ for $AUC_t$ and $C_{max}$ were 98.08% and 88.81%, respectively. The 90% confidence intervals were within ${\pm}20%$ (e.g., $-5.69{\sim}10.16$ and $-12.30{\sim}8.30$ for $AUC_t$ and $C_{max}$, respectively). There were no sequence effect between two tablets in logarithmically transformed $AUC_t$ and $C_{max}$. The 90% confidence intervals using logarithmically transformed were within the acceptance range of log(0.8) to log(1.25) (e.g., $0.95{\sim}1.11$ and $0.89{\sim}1.09$ for $AUC_t$ and $C_{max}$, respectively). Two parameters met the criteria of prior and revised KFDA guideline for bioequivalence, indicating that $Carvelol^{TM}$ tablet is bioequivalent to $Dilatrend^{TM}$ tablet.

  • PDF

불포화 모래의 흡입응력 이력현상에 대한 실험적 연구 (Experimental Study on the Hysteresis of Suction Stress in Unsaturated Sand)

  • 송영석;최진수;김교원
    • 지질공학
    • /
    • 제22권2호
    • /
    • pp.145-155
    • /
    • 2012
  • 자동 흙-함수특성곡선 시험장치를 이용하여 상대밀도 60%인 주문진표준사에 대한 건조 및 습윤과정에서의 모관흡수력과 체적함수비를 측정하였다. 습윤과정이 건조과정에 비해 상대적으로 많은 시간이 소요되며, 이것은 건조과정에서 간극에 갇힌 독립된 공기에 의한 흐름 저항에 의한 것으로 판단된다. 측정된 모관흡수력과 체적함수비를 토대로 van Genuchten (1980)의 방법을 이용하여 흙-함수특성곡선(SWCC)을 예측하였다. 불포화 관련계수는 건조과정의 경우 ${\alpha}$는 0.399, n은 8.586, m은 0.884이며, 습윤과정의 경우 ${\alpha}$는 0.548, n은 5.625, m은 0.822로 산정되었다. 그리고 건조과정과 포화과정에서의 흙-함수특성곡선(SSCC)이 일치하지 않는 이력현상이 발생되었다. 불포화 관련계수를 이용하여 유효포화도와 흡입응력의 상관관계인 흡입응력특성곡선(SSCC)을 예측하였다. 흡입응력은 모관흡수력이 공기함입치 이상으로 작용할 경우 급격하게 감소하는 것으로 나타났다. 따라서 불포화토의 유효응력은 공기함입치 이상의 모관흡수력이 작용할 경우 포화토의 유효응력과 다른 값을 갖게 된다. 그리고 불포화상태에서의 동일한 유효포화도에서는 건조과정의 흡입응력이 더 크게 발생된다. 즉 흡입응력특성곡선(SSCC)에서도 건조과정과 포화과정이 일치하지 않는 이력현상이 발생되었다. 이는 흙-함수특성곡선(SWCC)의 이력현상에 기인하는 것으로 판단되며, 잉크병 효과와 접촉각 이력현상에 의해 발생되는 것으로 예상할 수 있다. 따라서 모래로 구성된 사면의 경우 지반 내 물이 유입되면서 흡입응력의 영향으로 사면 안정성에 유리하게 작용하다가 일정 흡입응력 이상이 되면 사면안정성에 불리하게 작용됨을 알 수 있다. 또한 실제 지반내 강우가 침투하는 과정은 습윤과정과 동일하므로 건조과정의 결과보다는 습윤과정의 결과를 활용하는 것이 바람직하다.

이마앞겉질을 제거시킨 흰쥐 앞뇌의 바닥핵무리에서 변성축삭종말의 미세구조연구 (Ultrastructure of Degenerating Axon Terminals in the Basal Forebrain Nuclei of the Rat following Prefrontal Decortication)

  • 안병준;고정식;안의태
    • Applied Microscopy
    • /
    • 제35권3호
    • /
    • pp.135-152
    • /
    • 2005
  • 중추신경계통에서도 최고중추인 이마앞겉질 (prefrontal cortex)은 거의 모든 대뇌겉질과 연결되어 있어서 대뇌겉질 각 부분에 저장된 감각, 운동, 언어... 등 모든 정보를 받을 뿐만 아니라, 앞뇌의 바닥핵들 (basal forebrain nuclei)을 비롯한 많은 신경핵들과도 연결되어 있어서 생체 내부환경과 본능에 관한 정보도 받아드린다. 이들 연결을 통해서 이마앞겉질은 변연계통의 본능, 감정, 기억, 학습기능과 줄무늬체계통의 적절한 표현, 대응, 절차기억, 운동조절기능들을 연계하고 조정한다. 앞뇌의 바닥핵들(꼬리핵 caudate nucleus, 줄무늬체바닥핵 fundus striati nucleus, 중격옆핵 accumbens septi nucleus, 중격핵 septal nucleus)도 역시 변연계통과 줄무늬체계통 사이에서 해부학적으로나 기능적으로도 교차기능이 있는 것으로 알려져 있다. 이 실험은 흰쥐의 이마앞겉질은 제거한 다음, 앞쪽 앞뇌의 바닥핵들에서 변성종말들이 있는지 여부와 그 미세구조를 관찰하려고 시행했다. $250{\sim}300g$된 흰쥐를 실험동물로 이용하였으며, 흰쥐들을 정상군, 대조군, 수술군으로 구분하였다. 수술군은 마취시킨 다음, 뇌수술장치에 고정시키고, 머리피부를 절개한 다음, 이마뼈에 구멍을 만들고, 이 구멍을 통해 이마앞겉질을 흡인하여 제거했다. 대조군은 이마뼈에 구멍을 만드는 과정까지만 실행하였고, 정상군은 아무조치도 취하지 않았다. 수술 후 2일 경과 후에 전자현미경 관찰을 위해 1% glutaraldehyde-1% paraldehyde 혼합액 (pH 7.4)에 1차 고정하였고, 뇌를 적출하여 고정액에 냉장시켰다가, 다음날 해당 신경핵을 적출하여 2차 고정액 (2% osmium tetroxide액)에 고정하였다. Araldite 혼합액에 포매하여 ultratome-V로 자른 절편은 4% uranyl acetate와 2.7% lead citrate로 염색하여 JEM 100CX-II 전자현미경으로 관찰하였다. 관찰결과 네 신경핵에서 모두 변성 축삭종말이 관찰되었는데, 출현비율은 상당한 차이를 보여서 가장 변성이 심한 신경핵은 꼬리핵 이었고, 다음은 줄무늬체바닥핵, 중격옆핵, 중격핵의 순서였다. 변성축삭종말이 각 부위에서 연접하는 모양을 비교한 결과 꼬리핵과 줄무늬체바닥핵에서는 모두 가지돌기가시(dendritic spine)에 연접하였으나, 중격옆핵과 중격핵에서는 가지돌기 (dendrite)에 연접하는 것과 가지돌기가시에 연접하는 것이 혼재하였다. 이들 두 신경핵 무리는 이마앞겉질에서 기원하는 축삭종말의 연접차이로 볼 때 서로 다른 회로계통에 속할 것으로 생각되며, 문헌고찰을 통해서 꼬리핵과 줄무늬체바닥핵은 줄무늬체회로 (striatal circuit)에 속하고 중격옆핵과 중격핵은 변연계통회로(limbic circuit)에 속할 것으로 판정했다. 이마앞겉질은 생리적, 약리적, 신경학적 및 형태학적 근거들로 보아 바닥핵들을 통해 변연계통과 대뇌겉질 전체에 영향을 미칠 것으로 여겨지는데, 본 실험에서는 네 종류의 바닥핵들, 즉 꼬리핵, 줄무늬체바닥핵, 중격옆핵 및 중격핵과 관련된 신경연접들을 관찰하였으며, 그 결과를 문헌 고찰한 결과 변연계통과 줄무늬체계통이 앞뇌의 바닥에 있는 신경핵들에서 형태학적 교차연결을 통해 정서와 마음의 상태를 행동과 대응으로 표현하는 중요한 신경회로가 존재함을 제안하였다.

담수산 백점충(Ichthyophthirius multifiliis)에 관한 연구 II. 백점충의 인위 감염 및 어체내 충체 발달상 (Studies on Ichthyophthirius multifiliis Fouquet, 1876 in Freshwater Fishes II. Experimental Infection and Development of I. multifiliis)

  • 지보영;김기홍;박수일;김이청
    • 한국어병학회지
    • /
    • 제11권1호
    • /
    • pp.51-60
    • /
    • 1998
  • 본 연구는 내수면 양식 어류에 백점충, Ichthyophthirius multifiliis를 인위 감염시켜 감염 특성 및 어체내 충체 발달상을 밝히고자 하였다. 어종별(무지개 송어, 메기, 이스라엘 잉어), 수온별($15^{\circ}C$, $18^{\circ}C$, $21^{\circ}C$) 및 충체 발달 단계별(trophont, protomont, theront) 인위 감염 시험 결과, 어종별로는 무지개 송어 시험구에서, 수온별로는 $18^{\circ}C$ 시험구에서 그리고 충체 발달 단계별로는 theront 시험구에서 양성적인 인위 감염을 확인할 수 있었다. 그리고 theront 농도별에 있어서는 어체당 1000개체의 theront가 감염을 양성적으로 유도할 수 있는 것으로 조사되었으며 어체당 1500개체 이상의 theront는 무지개 송어치어에 100%의 감염을 유도하였다. 수온 $18^{\circ}C$의 인위 감염된 무지개 송어에서 7일 동안 어체내 충체의 발달 과정을 조사한 결과, 충체는 시간이 경과함에 따라 연속적인 발달을 행하여 크기가 증대되었으며 감염 3일째부터는 성숙되는 것으로 확인되었다. 그리고 총체의 형태학적 변화는 감염 2일째에는 구부장치가 기능적으로 발달하기 시작한 것을 볼 수 있었고, 감염 4일째부터는 수축포가 현저히 발달되기 시작하였으며 감염 6일째는 이들의 수가 현저히 증가한 것을 확인할 수 있었다. 그리고 감염 기간이 경과함에 따라 충체는 숙주의 아가미 일차 새변의 입새 동맥쪽으로 이동하는 경향을 나타내었다.

  • PDF

로우터리 맥류파종기 경운날의 개량시험 (Improvement of Rotary Tine for Barley Seeder Attached to Rotary Tiller)

  • 김성래;김문규;김기대;허윤근
    • Journal of Biosystems Engineering
    • /
    • 제4권1호
    • /
    • pp.1-23
    • /
    • 1979
  • The use of barley seeder attached to rotary tiller in the rural area has a significant meaning not only for the solution of labor peak season, but also for the increase of land utilization efficiency. The facts that presently being used barley seeders are all based on the mechanical principles of the reverse rotation, center drive and are all using forward rotating tine, which is used to be easily and heavily worn out when it rotates reversely, raise problem of recommending them to rural area in Korea. Therefore, the main objective of the study was to develop new type of rotary tine attachable to barley seeders. To attain the objective the following approaches were applied. (1) The kinematic analysis of reverse rotating barley seeders. (2) The studies on the soil bin and artificial soil. (3) The comparative experiment on the power requirement of prototype tine. The results obtained from the studies are summarized as follow: 1. The kinematic analysis of barley seeder attached to rotary tiller: The following results were obtained from the kinematic analysis for deriving general formulae of the motion and velocity characterizing the rotary tine of barley seeders presently being used by farmers. a) The position vector (P) of edge point (P) in the rotary tine of reverse rotating, center drive was obtained by the following formula. $$P=(vt+Rcos wt)i+Rsin wt j+ \{ Rcos \theta r sin \alpha cos (wt- \beta +\theta r) +Rsin \theta r sin \alpha sin (wt-\beta + \theta r) \} lk $$ b) The velocity of edge point $(P^')$ of reverse rotating, center drive rotary tine was obtained by the following formula. $$(P^')=(V-wR sin wt)i+(w\cdot Rcoswt)j + \{ -w\cdot Rcos \theta r\cdot sin \alpha \cdot sin (wt-\beta +\theta r) + w\cdot Rsin \theta r\cdot sin \alpha \cdot cos (wt- \beta + \theta r \} k $$ c) In order to reduce the power requirement of rotary tine, the angle between holder and edge point was desired to be reduced. d) In order to reduce the power requirement, the edge point of rotary tine should be moved from the angle at the begining of cutting to center line of machine, and the additional cutting width should be also reduced. 2. The studies on the soil bin and artificial soil: In order to measure the power requirement of various cutting tines under the same physical condition of soil, the indoor experiments Viere conducted by filling soil bin with artificially made soil similar to the common paddy soil and the results were as follows: a) When the rolling frequencies$(x)$ of the artificial soil were increased, the densIty$(Y)$ was also increased as follows: $$y=1.073200 +0.070780x - 0.002263x^2 (g/cm^3)$$ b) The absolute hardness $(Y)$ of soil had following relationship with the rolling frequencies$(x)$ and were increased as the rolling frequencies were increased. $$Y=37.74 - \frac {0.64 + 0.17x-0. 0054x^2} {(3.36-0.17x + 0.0054x^2)^3} (kg/cm^3)$$ c) The density of soil had significant effect on the cohesion and angle of internal friction of soil. For instance, the soil with density of 1.6 to 1.75 had equivalent density of sandy loam soil with 29.5% of natural soil moisture content. d) The coefficient of kinetiic friction of iron plate on artificial soil was 0.31 to 0.41 and was comparable with that of the natural soil. e) When the pulling speed of soil bin was the 2nd forward speed of power tiller, the rpm of driving shaft of rotary was similar to that of power tiller, soil bin apparatus is indicating the good indoor tester. 3. The comparative experiment on the power requirement of prototype tine of reverse rotating rotary: According to the preliminary test of rotary tine developed with various degrees of angle between holder and edge pcint due to the kinematic analysis, comparative test between prototype rotary tine with $30 ^\circ $ and $10 ^\circ$ of it and presently being used rotary tine was carried out 2nd the results were as follows: a) The total cutting torque was low when the angle between holder and edge point was reduced. b) $\theta r$ (angle between holder and edge point) of rotary tine seemed to be one: of the factors maximizing the increase of torque. c) As the angle between holder and edge point ($\theta r$) of rotary tine was $30 ^\circ $ rather than $45 ^\circ $, the angle of rotation during cutting soil was reduced and the total cutting torque was accordingly reduced about 10%, and the reduction efficiency of total cutting torque was low when the angle between holder and edge point ($\theta r$) of rotary tine was $10 ^\circ $, which indicates that the proper angle between holder and edge point of rotary tine should be larger than $10 ^\circ $ and smaller than $30 ^\circ $ . From above results, it could be concluded that the use of the prototype rotary tine which reduced the angle between holder and edge point to $30 ^\circ $, insted of $45 ^\circ $, is disirable not only decreasing the power requirements, but also increasing the durabie hour of it. Also forward researches are needed, WIlich determine the optimum tilted angle of rotary brocket, and rearrangement of the rotary tine on the rotary boss.

  • PDF