• 한국추진공학회지
• /
• 제15권1호
• /
• pp.63-68
• /
• 2011

산화제로 액체산소를 사용하고 산화제 탱크 내부에 가압제 용기가 설치된 액체추진기관의 가압시스템에서는 가압제 용기에서 극저온으로 토출되는 가압제가 가스발생기 후단의 열교환기를 통과하여 극저온에서 고온으로 온도가 상승되어 추진제 탱크의 얼리지로 공급된다. 이러한 가압시스템을 개발하기 위해서는 열교환기를 모사할 수 있는 가열장치를 적용하여 인증시험을 수행하여야 한다. 본 연구에서는 가압시스템 개발시험에 적용할 수 있는 극저온 헬륨가스 가열장치를 개발하였고 이에 대한 가열시험을 수행하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1986년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 17-18 Oct. 1986
• /
• pp.596-600
• /
• 1986

This paper describes a capacitively reading apparatus for determining the angular orientation, speed and/or direction of rotary objects such as shaft, dial hand, counter wheel and the like. The apparatus consists of sensing device and circuit accompanying with said sensing device. The sensing device is provided by arranging many stationary electrodes lying substantially on a surface of a stationary plane member and by arranging rotary electrode lying substantially on a surface of rotary objects to be monitored, in which said rotary electrode is in confronting relationship to some stationary electrodes so as to construct unique capacitors according to the angular position of rotary objects. The angular position of said rotary electrode is determined by sets of stationary electrodes which are in confronting relationship to rotary electrode. A carrier signal is generated by scanning device while scanning said stationarelectrodes, whose periods are in corresponding relationship to said stationary electrodes, respectively. The periods of carrier corresponding to the angular position of said rotary electrode is modulated by a modulation signal generated by detecting device according to said rotary electrode. This apparatus is applied to automatically monitor any kind of storage tank, as well as to automatically read the conventional utility meters such as Watthour meters, Gas meters, Water meters, etc..

• 설비공학논문집
• /
• 제25권3호
• /
• pp.164-167
• /
• 2013

The objectives of this paper are to study the performance improvement of waste heat recovery from a boiler, by the Cured-In-Place-Pipe(CIPP) process. The conventional apparatus does not utilize the waste heat from the boiler during the process. However, the present apparatus recovers the waste heat from the boiler. When the new apparatus is used, the bending strength and modulus of the CIPP becomes double, and is over 45% stronger, than the required conditions, respectively. It is found that the energy consumption reduces to 50%, by recovering the waste heat from the boiler, and the oil consumption amount reduces to 1/3, compared to the conventional apparatus.

• 한국해양공학회지
• /
• 제19권6호통권67호
• /
• pp.72-77
• /
• 2005

The materials used in a ship screw propeller are commonly made with brass. The seawater corrosion and seawater cavitation of the screw propeller reduces the propulsive performance of the ship. In screw manufacturing, the corrosion rust of the screw propeller is removed through a hand grinding method. The grinding process produces dust of the heavy metals from the brass. The dust creates a poor working environment that is harmful to the health of the workers. An automatic corrosionrust removing apparatus, using a blasting method, was developed for the improvement of screw polishing conditions and its working environment. The performance of this apparatus was investigated by surface roughness, weight loss rate, hardness, electrochemical corrosion resistance, and cavitation erosion, after removing of the corrosion rust under various blasting conditions. Two medias of alumina and emery were used in this experiment. The surface roughness and hardness of the screw were improved by this apparatus. The electrochemical corrosion potential (Ecorr) and current density (Icorr) were measured by the dynamic polarization method, using a potentiostat,under the conditions of surface polishing with grinding, blasting, wire brushing, and fine sand papering. The test results prove that the new corrosion rust-removing apparatus improves the surface performance of a screw propeller.

• 한국응용과학기술학회지
• /
• 제29권4호
• /
• pp.653-658
• /
• 2012

고농도 유기질 폐수처리를 위해 전기화학적 방법의 사용에 있어 관심이 고조되고 있다. 전기화학적 방법의 기술은 음식물폐수 및 공업적 폐수 문제를 해결하는데 이상적 처리 방법이다. 다른 화학적 처리 방법과는 다르게 전기화학적 처리장치는 2차 폐수의 부피를 증가시키지 않고 용수와 유기질 비료로 재활용한다. 전기화학적 방법은 전해부상장치를 무기화학적 약품과 병행하여 더욱 효과적으로 음식물 폐수를 처리한다. 이 연구는 2차 처리로 초음파와 오존처리로 탈색, COD와 BOD가 격감함으로 용수 및 유기질 비료로 활용하도록 실험하였다.

• The Korean Journal of Physiology and Pharmacology
• /
• 제18권2호
• /
• pp.103-108
• /
• 2014

Head restraining is an experimental technique that firmly secures the animal's head to a fixation apparatus for the precise control and sensing of behaviors. However, procedural and surgical difficulties and limitations have been obstructing the use of the technique in neurophysiological and behavioral experiments. Here, we propose a novel design of the head-restraining apparatus which is easy to develop and convenient for practical use. Head restraining procedure can be completed by sliding the head mounter, which is molded by dental cement during implantation surgery, into the port, which serves as matching guide rails for the mounter, of the fixation bar. So neither skull-attached plates nor screws for fixation are needed. We performed intracranial self stimulation experiment in rats using the newly designed device. Rats were habituated to acclimatize the head-restraint environment and trained to discriminate two spatially distinguished cues using a customized push-pull lever as an operandum. Direct electrical stimulation into the medial forebrain bundle served as reward. We confirmed that head restraining was stable throughout experiments and rats were able to learn to manipulate the lever after successful habituation. Our experimental framework might help precise control or sensing of behavior under head fixed rats using direct electrical brain stimulation as a reward.

• 소성∙가공
• /
• 제25권3호
• /
• pp.161-168
• /
• 2016

Sheet metals are often required to be formed into three dimensional curved shapes for use as skin structures. As a result various sheet metal forming methods, such as press die forming, stretch forming, and line heating have been used over the years in industrial production lines. Although they are extensively used in industry, these methods are not suitable for small quantity batch productions. Studies have been conducted to improve or replace these methods with plausible flexible forming technologies. As a part of these studies, we developed a new and more efficient forming device named flexibly-reconfigurable roll forming (FRRF). The current study presents the process development and experimental verification for the applicability of this device. To improve the efficiency of the FRRF apparatus, several hardware components were invented and a suitable operating program was developed using MFC of visual C++. The ways to make the FRRF apparatus fully functional are also described. Sheet metal was formed into three dimensional shapes using the FRRF apparatus and the final products are presented as evidence for the applicability of the developed device.

• 인터넷정보학회논문지
• /
• 제3권1호
• /
• pp.1-10
• /
• 2002

원격 영상전송 장치는 안전상의 문제가 있거나 사람이 갈 수 없는 곳을 관찰하기 위해 로봇 기술과 영상전송 기술을 결합한 것이다. 최근 원격 제어를 위해 웹서버와 로봇간 유선 및 RF를 이용한 제어 장치들이 개발되고 있지만, 작동 거리 및 인터넷 라인을 설치해야 하는 제한점이 있으며, 무선 방식의 통신장비를 이용할 경우 무선 라우터의 가격이 고가라는 문제가 있다. 본 연구에서는 이러한 문제점을 해결하기 위해 셀룰러 폰 통신망을 이용하여 영상전송 및 영상전송 장치를 원격으로 제어할 수 있는 시스템을 개발하였으며, 개발된 시스템은 기존의 무선통신(RF)을 이용한 영상 전송시의 단점인 거리 제한 문제와 인터넷을 이용한 영상전송시의 문제를 해결할 수 있었고, 현재의 통신망을 비롯한 제한된 조건 하에서 최적의 영상 및 음성을 전송할 수 있었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.720-728
• /
• 2009

This thesis is results of numerical analyses about test results of discharge capacity apparatus using penetration method. Applicability of numerical approach with FEM technique, using Cam-clay model, was confirmed by analyzing the results of standard consolidation test before analyzing test results of discharge capacity apparatus using penetration method. Thus, input parameters for the model was convinced to be appropriate. For numerical analyses about test results of discharge capacity apparatus using penetration method, identical initial and loading conditions during tests were applied to simulate test results correctly. Effects of ground disturbance resulted from installment of vertical drains on the behaviors of consolidation were also simulated. Applicability of numerical approach was investigated by comparing test results with numerical ones. As results of them, both of consolidation settlement were found to be in good agreements so that its applicability was confirmed. As results of numerical estimation, degree of consolidation with the condition of considering smear zone was found to be delayed, compared with results without smear zone. On the other hands, parametric numerical analyses of changing parameters related to smear zone such as permeability and size of smear zone and permeability of vertical drain were also carried out.

• 한국가정과교육학회지
• /
• 제5권1호
• /
• pp.133-141
• /
• 1993

The ability of the meal management of the middle and high school girls in kangweon area was surveyed by Likert scale questionnaire. The results were as follows: 1. The ability of the meal menagement of the middle school girls have good marks in table etiquette as 3.93 point, in using cooking apparatus as 3.86 points, in sanitation management as 3.76 points and in food selection as 3.70 points, but not so good in food preparation as 3.56 points, in meal planning as 3.22 points and in table setting as 3.20 points. 2. For the high school girls they have good marks in table etiquette(3.99 points), using cooking apparatus(3.96 points) food selection(3.95 points) and sanitation management(3.93 points) using cooking apparatus(3.96 points), food selection(39.5 points)and sanitation managment (3.93 points), but not so good in food preparation(3.64 points) meal planning and sanitation manabement(P<0.001) but no significant difference in food preparation, using cooking apparatus and table etiquette between middle and high school girls. In general they have a significant difference in ability of meal management between middle and high school girls.