• Restorative Dentistry and Endodontics
• /
• v.30 no.2
• /
• pp.95-101
• /
• 2005

The aim of this study was to evaluate the microleakage of teeth according to root canal preparation with & without apical enlargement in various size of apical foramen. 60 extracted one canal roots were cross-cutted at 5 mm from root apex and divided into two groups according to their apical foramen size of large (L) and small (S). Each group was subdivided into two groups accordance with their cross-sectional configuration at 5 mm from apex, round (R) and ovoid (O); SR Group, SO Group LR Group, LO Group. Each group was shaped in .02 taper by Quantec series Nickel-Titanium (NiTi) rotary file, obturated by lateral condensation method. Leakage was measured using a fluid transport model under 40 $cmH_2O$ pressure. After the leakage test, blocks which had showed the leakage retreated with .04 taper and ,06 taper and evaluated the degree of fluid filtration in each group. The data was analysed statistically using chi-square test and fisher's exact test. The results obtained were as follows : 1. Significant difference in leakage was found in groups which had different apical foramen size in .02 taper instrumentation (p < 0.05), but not in .04 taper instrumentation (p > 0.05) 2. The difference in microleakage according to the shape of canal was not evident at 5 mm from apex (p > 0.05). 3. There was correlation between .02 taper instrumentation and .04 taper instrumentation in LR group, LO group (p < 0.05).

• Restorative Dentistry and Endodontics
• /
• v.37 no.1
• /
• pp.24-28
• /
• 2012

Objectives: The aim of this study was to test the hypothesis, that the effectiveness of irrigation in removing smear layer in the apical third of root canal system is dependent on the depth of placement of the irrigation needle into the root canal and the enlargement size of the canal. Materials and Methods: Eighty sound human lower incisors were divided into eight groups according to the enlargement size (#25, #30, #35 and #40) and the needle penetration depth (3 mm from working length, WL-3 mm and 9 mm from working length, WL-9 mm). Each canal was enlarged to working length with Profile.06 Rotary Ni-Ti files and irrigated with 5.25% NaOCl. Then, each canal received a final irrigation with 3 mL of 3% EDTA for 4 min, followed by 5 mL of 5.25% NaOCl at different level (WL-3 mm and WL-9 mm) from working length. Each specimen was prepared for the scanning electron microscope (SEM). Photographs of the 3mm area from the apical constriction of each canal with a magnification of ${\times}250$, ${\times}500$, ${\times}1,000$, ${\times}2,500$ were taken for the final evaluation. Results: Removal of smear layer in WL-3 mm group showed a significantly different effect when the canal was enlarged to larger than #30. There was a significant difference in removing apical smear layer between the needle penetration depth of WL-3 mm and WL-9 mm. Conclusions: Removal of smear layer from the apical portion of root canals was effectively accomplished with apical instrumentation to #35/40 06 taper file and 3 mm needle penetration from the working length.

• The Journal of the Korean dental association
• /
• v.55 no.1
• /
• pp.63-70
• /
• 2017

Materials and methods: Sixty extracted premolars were assigned to three groups according to the root canal system (Weine's classification; type I, II and III) of 20 teeth each using radiographic examination. The root tip was cut horizontally 1 mm from the anatomical apex and the apical cross-section was visualized using microscope at x50 magnification and photographed. Minimum and maximum apical root canal diameter of each tooth was measured and classified into three types by canal morphology (round, oval and flattened shape). Statistical analysis was performed to compare the apical root canal diameter and morphology according to the root canal system. Results: In apical root canal morphology at cross-sectional view, the most common shape was round in type I, flat in type II, and oval in type III. In apical root canal diameters at cross-sectional view, there was a significant difference between the minimum and maximum diameter in all types (p<0.05). The maximum diameter was 0.331 mm in type I, 0.519 mm in type II, and 0.310 mm in type III. There was a significant difference among type I, III and type II (p<0.05). Conclusion: The morphology and diameter of apical root canal was different according to the root canal system. Therefore, clinicians should consider the apical file size in view of the apical root canal shape according to the root canal system.

• Restorative Dentistry and Endodontics
• /
• v.33 no.1
• /
• pp.66-75
• /
• 2008

This study examined the influence of the apical sizes on the sealing ability of a root canal filling. Thirty-six single rooted teeth with a single canal were divided into 3 groups (n = 12) and instrumented with either the $Profile^{(R)}$ or $LightSpeed^{(R)}$ system to achieve three different apical sizes (master apical file [MAF] of #25, #40, or #60). The teeth were filled with gutta perch a using a modified continuous wave technique. The level of microleakage was determined by immersing ten teeth from each group into India ink for 1 week followed by clearing with nitric acid, ethyl-alcohol, and methylsalicylate. The microleakage was measured using vernier calipers. The data was analyzed statistically using Kruskal-Wallis one-way ANOVA and a Student-Newman-Keuls Method. Two teeth from each group were sectioned horizontally at 1, 2, 3 and 4 mm from the apex in order to observe a cross section. The apical size was significantly (p < .05) influenced the level of microleakage. In the Student-Newman-Deuls Method, MAF sizes of #25 and #40; and MAF sizes of #25 and #60, respectively showed a statistically significant difference. There was no significant difference between #40 and #60. In most cross sections, oval-shaped canals were observed, and the irregularity of the internal surface increased with decreasing apical size. There was also an increase in the area of recess, which is the area where the canal space is not filled with either gutta-percha or sealer. When the root canals are filled using a modified continuous wave technique, canal filling with more consistent and predictable outcome may be expected as the apical preparation size is increased.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.11 no.1
• /
• pp.51-58
• /
• 1981

The author examined 515 full mouth roentgenograms stored in the Dept. of Oral Radiology, College of Dentistry, Seoul National University. For evaluating the efficiency of the routine full mouth roentgenogram, each of abnormal conditions such as impacted teeth, missing, caries, crown, filling and apical lesions was observed. The results obtained were as follows; 1. Among 14.420 teeth examined, missing teeth were 174, impacted 16, caries 161 and treated 1,162. 2. The incidence of impacted third molar was close to 18.7 percent and the incidence of missing third molar was about 33.4 percent. 3. Among carious and treated teeth, 178 teeth (1.2%) were needed observation of root apex. And of these teeth, 119 teeth 0.8% were observed with apical lesion. 4. There is a considerable relation between the incidence or size of apical lesion and the accuracy of endodontical treat. 5. Among the teeth with apical lesion, upper and lower first molars were most frequent (about 41%), upper and lower canine were rare (about 1.7%).

• Restorative Dentistry and Endodontics
• /
• v.40 no.2
• /
• pp.123-127
• /
• 2015

Objectives: Glide path preparation is recommended to reduce torsional failure of nickel-titanium (NiTi) rotary instruments and to prevent root canal transportation. This study evaluated whether the repetitive insertions of G-files to the working length maintain the apical size as well as provide sufficient lumen as a glide path for subsequent instrumentation. Materials and Methods: The G-file system (Micro-Mega) composed of G1 and G2 files for glide path preparation was used with the J-shaped, simulated resin canals. After inserting a G1 file twice, a G2 file was inserted to the working length 1, 4, 7, or 10 times for four each experimental group, respectively (n = 10). Then the canals were cleaned by copious irrigation, and lubricated with a separating gel medium. Canal replicas were made using silicone impression material, and the diameter of the replicas was measured at working length (D0) and 1 mm level (D1) under a scanning electron microscope. Data was analysed by one-way ANOVA and post-hoc tests (p = 0.05). Results: The diameter at D0 level did not show any significant difference between the 1, 2, 4, and 10 times of repetitive pecking insertions of G2 files at working length. However, 10 times of pecking motion with G2 file resulted in significantly larger canal diameter at D1 (p < 0.05). Conclusions: Under the limitations of this study, the repetitive insertion of a G2 file up to 10 times at working length created an adequate lumen for subsequent apical shaping with other rotary files bigger than International Organization for Standardization (ISO) size 20, without apical transportation at D0 level.

• Restorative Dentistry and Endodontics
• /
• v.12 no.2
• /
• pp.11-15
• /
• 1987

Thirty maxillary second premolars were fixed, decalcified, washed and embedded in celloidin to observe the root canal size and morphology at apical 5mm area. The results were as follows: 1. Single canaled teeth and two canaled teeth were approximately equal numbered. 2. Single canaled teeth have round canal but two canaled teeth have long, slender buccal canal and ovoid lingual canal. 3. The canal size of single canaled teeth was $380{\pm}30{\mu}m,\;340{\pm}22{\mu}m$, but that of buccal canal of two canaled teeth was $360{\pm}32{\mu}m,\;240{\pm}28{\mu}m$, lingual canal was $330{\pm}28{\mu}m,\;280{\pm}20{\mu}m$.

• Restorative Dentistry and Endodontics
• /
• v.29 no.2
• /
• pp.141-146
• /
• 2004

The purpose of this study was to evaluate the efficiency of the preparation of oval canals using hand and engine-driven instruments with SEM observation. Thirty single-rooted teeth with oval canal were used in this study. The teeth were divided into 3 groups. In group A the teeth were instrumented up to a size 35 K-file using RC-prep and irrigated with 5% NaOCl between each file size. In group B. the teeth were instrumented with Profile according to the manufacture's instructions using RC-Prep and irrigated with 5% NaOCl between each file size. In group C. the teeth were instrumented with GT file according to the manufacture's instructions using RC-prep and irrigated with 5% NaOCl between each file size. Then. in all teeth. a final flush of 5ml of distilled water delivered for 30s. Canals were dried with sterile standardized paper points. After preparing the canals, the teeth were sectioned along their mesial and diatal surfaces by using low-speed diamond disc. chisel and mallet. Each root section was then dehydrated in graded concentration of alcohol (70, 80, 90, 100%). mounted on an aluminum stub. sputter-coated with gold-palladium and observed with scanning electron microscope (HITACHI S-4200) in middle and apical area. The results of this study were as follows: 1. In the middle area. group B and group C showed less smear layer than group A and it was statistically significant (p < 0.05). 2. In the middle area. group B showed greater smear layer than group C. but it was not statistically significant (p > 0.05). 3. In the apical area, group C showed less smear layer than group A. and it was statistically significant (p < 0.05). 4. In the apical area. group A showed greater smear layer than group B. but it was not statistically significant (p > 0.05). 5. In the apical area. group B showed greater smear layer than group C. but it was not statistically significant (p > 0.05). 6. In all groups. the middle area was less smear layer than the apical area. and it was statistically significant (p < 0.05).

• The Korean Journal of Zoology
• /
• v.23 no.1
• /
• pp.13-24
• /
• 1980

The germarium contains the apical complex consisting of a multinucleated syncytium. Apical complex has a nutritive role for the early spermatogonia. Trophocytes are irregularly shaped and are distributed throughout the space from spermatogonial cysts to sperm bundles, and they increase in size by endopolyploidization. As meiotic divisions are not complete until the final moult, spermatogenesis continues even in the adult. Chromosome number is 2n=24. Spermiogenesis is divided into seven stages in terms of chromatin concentration, cytoplasmic granules, and the nuclear size and shape. These stages could be grouped into the spherical, the elongating and the rodform spermatids in shape.

• ALGAE
• /
• v.23 no.2
• /
• pp.115-118
• /
• 2008

Cells of the dinoflagellate Peridinium were frequently observed in water samples of Togyo reservoir, and some species were responsible for dense blooms. Recently, we could identify them as P. bipes f. occultatum Lindem. and P. aciculiferum Lemm., considering morphology (Ki et al. 2005a; Ki and Han 2005b): However, some unidentified Peridinium cells with different shapes and body sizes were found among the samples collected during early spring. Here we describe their morphological characteristics such as thecal plate and body size to characterize its taxonomic identity by morphological characters. The formula of epithecal plates was recorded as 4 apical, 2 intercalary and 7 precingular plates (i.e. 4’', 2a, 7’'’') and the epicone in an apical view was symmetric. An apical pore was easy to make out under a light microscope. No cingular displacement was observed. The average body size was 33 $\mu$m in length with a range of 26-36 $\mu$m, and average 26 $\mu$m in width with a range of 21-31 $\mu$m, respectively; the cell was, therefore, shown slightly elongated. This way we identified Peridinium umbonatum Stein, 1883 for the first time from Korean freshwaters.