• The Korean Journal of Pain
• /
• v.37 no.2
• /
• pp.132-140
• /
• 2024

Background: This study aimed to identify exact anatomical landmarks and ideal injection volumes for safe adductor canal blocks (ACB). Methods: Fifty thighs from 25 embalmed adult Korean cadavers were used. The measurement baseline was the line connecting the anterior superior iliac spine (ASIS) to the midpoint of the patellar base. All target points were measured perpendicular to the baseline. The relevant cadaveric structures were observed using ultrasound (US) and confirmed in living individuals. US-guided dye injection was performed to determine the ideal volume. Results: The apex of the femoral triangle was 25.3 ± 2.2 cm distal to the ASIS on the baseline and 5.3 ± 1.0 cm perpendicular to that point. The midpoint of the superior border of the vasto-adductor membrane (VAM) was 27.4 ± 2.0 cm distal to the ASIS on the baseline and 5.0 ± 1.1 cm perpendicular to that point. The VAM had a trapezoidal shape and was connected as an aponeurosis between the medial edge of the vastus medialis muscle and lateral edge of the adductor magnus muscle. The nerve to the vastus medialis penetrated the muscle proximal to the superior border of the VAM in 70% of specimens. The VAM appeared on US as a hyperechoic area connecting the vastus medialis and adductor magnus muscles between the sartorius muscle and femoral artery. Conclusions: Confirming the crucial landmark, the VAM, is beneficial when performing ACB. It is advisable to insert the needle obliquely below the superior VAM border, and a 5 mL injection is considered sufficient.

• The korean journal of orthodontics
• /
• v.29 no.5 s.76
• /
• pp.511-519
• /
• 1999

The shape of orthodontic retraction spring was varied and force system of each case was obtained using numerical analysis and verified with spring tester. The factors for obtaining biomechanically efficient spring under anatomic limitation were suggested as follows. 1. M/F ratio increases and L/D rate decreases as loop height increases. 2. M/F ratio increases and L/D rate decreases as incorporating more wire above minimum bending moment area. 3. M/F ratio decreases and L/D rate decrease as incorporating more wire below minimum bending moment area. 4. M/F ratio can not be greater than spring height no matter how much wire is incorporated at the apex of the loop. 5. Additional moment is necessary to obtain enough M/F ratio for translation under anatomical limitation. 6. Additional moment should be incorporated at every pah of the spring because M/F ratio and L/D rate decreases as horizontal spring length increases. 7. Material, cross section, and shape of the spring influence L/D rate, whereas M/F ratio is influenced by the shape of the spring independent from material and cross section.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.33 no.2
• /
• pp.158-165
• /
• 2011

A 73-year-old Korean female patient with a fully edentulous mandible was planned to have five implant fixtures installed in the anterior mandible for the fixed prosthesis. After 3-dimensional (3D) computed tomographic scanning was transferred to OnDemand3D$^{(R)}$ (Cybermed Co., Seoul, Korea) software program for the virtual planning, five fixtures of MK III Groovy RP implants of Branemark System$^{(R)}$ (Nobel Biocare AB Co., Goteborg, Sweden) were installed in the anterior mandible between both mental foramens using In2Guide$^{(R)}$ (CyberMed Co., Seoul, Korea) mucosa-supported surgical template with Quick Guide Kit$^{(R)}$ (Osstem Implant Co., Seoul, Korea) systems. Fixture installations were completed successfully without any complications, such as mental nerve injury, bony bleedings, fenestrations and other unexpected events. Postoperative computed tomographic scans were aligned and fused to the planned implant, then angular and linear deviations were compared with the planned virtual implants. The mean angular deviation between the planned and actual implant axes was $3.42{\pm}1.336^{\circ}$. The mean distance between the planned and actual implant at the neck area was $0.544{\pm}0.290$ mm horizontally and $0.118{\pm}0.079$ mm vertically. The average distance between the planned and actual implant at the apex area was $1.166{\pm}0.566$ mm horizontally and $0.14{\pm}0.091$ mm vertically. These results could be considered more precise and accurate than previous reports, and even our recent results. The entire procedures of this case are reported and reviewed.

• Journal of Korean Society of Forest Science
• /
• v.76 no.3
• /
• pp.249-255
• /
• 1987

Forestry as with all land matters, under the Constitution, is a State matter. Thus the States, numbering 14, have considerable autonomy in decisions on forestry and related matters. However, the Federal Government, having jurisdiction over such issues as defence, education and research, endeavours to coordinate, standardise and advise the States on matters where the States have jurisdiction. However, forestry being a major revenue earner, is jealously guarded by the States. Under such circumstances and recognising the interdependencies of impacts of decisions at the State level, the institutional organisations play an important role in coordinating state activities to ensure that the benefits to the country as a whole are not sacrificed in favour of interests of individual state. Various legislative mechanisms have been established to ensure this coordinated effort. A National Forestry Council forms the apex of national political coordination. The Federal Forestry Department is responsible for coordination of developmental activities at the State level, which are implemented be the State Forestry Departments within Peninsular Malaysia. Research is carried out centrally by the Forest Research Institute of Malaysia(FRIM), a statutory body formed in 1985 from a research division of the Forestry Department. The Stares of Sabah and Sarawak have their own Forestry Departments, independent of the Federal Department, and each with its own research unit independent of FRIM. Tertiary education in forestry is the sole responsibility of the Agricultural University at Serdang with a campus for Diploma level training in Sarawak. In the developmental area in the State of Sabah, institutions have been formed to focus on specific areas of activities. The Sabah Foundation is responsible for the long term development of the State forests with a concession of about one million ha. Sabah Forest Development Authority(SAFODA) was formed to carry out reforestation of denuded areas. Sabah Forest Industries Ltd.(SFI) is responsible for the country's only integrated pulp and paper industry with its own afforestation program to support its resource supply. In Peninsular Malaysia various states have established State Corporations to manage large "sustained yield" concessions. While wildlife and state parks are managed by the respective forestry departments in Sabah and Sarawak, it is the responsibility of a separate department in Peninsula Malaysia called the Department of Wildlife and National Parks(under the Ministry of Science, Technology and Environment). Timber trade legislation and promotion in the Peninsular is the responsibility of the Malaysian Timber Industries Board(MTIB) for Peninsular Malaysia and the Sarawak Timber Industries Development Corporation(STIDC) in Sarawak. In the area of NGOs ; the Institute of Foresters Malaysia, is the professional body of forestry in the country. A Malaysian Forestry Society caters for the public participation and interest. Other environmentally related NGOs such as the Malayan Nature Society, the Environmental Protection Society, World Wildlife Fund, Friends of the Earth and the Consumers Associations also involve themselves in specific forestry activities. A number of timber trade associations are also formed by the private sector to assist the industries.

• Restorative Dentistry and Endodontics
• /
• v.27 no.1
• /
• pp.66-76
• /
• 2002

The purpose of this study is to evaluate the effectiveness of customized master cone on apical sealing in various apical size of prepared root canals, that is MAF(Master Apical File) and to know at which apical size the apical leakage is to be significantly reduced using customized master cone. 120 extracted single rooted premolars were divided into four groups according to their apical size(MAF), #30, 40, 50 and 60. And then, each group was subdivided into three in accordance with three obturation methods, lateral condensation with standardized master cone, lateral condensation with chloroform-dipped customized master cone, and continuous wave of obturation technique. Resorcinol-formaldehyde resin was used for the microleakage test of this study. Teeth were sectioned horizontally at 1.5mm(Level 1), 2.5mm(Level 2), and 3.5mm(Level 3) from the anatomical root apex using low speed microtome. All sections were examined under $\times$40 magnification with a stereomicroscope, photographed, and then scanned. With the scanned images, resin-infiltrated area presenting the microleakage was calculated using SigmaScan/Image, and the ratio of leakage to the total root canal area of each group was analyzed statistically(one way ANOVA). The results were as follows ; 1. In groups of MAF #30, there was no significant difference of mean leakage ratio among three obturation methods at all three levels. 2. In groups of MAF #40, the group using lateral condensation with customized master cone had the low-est mean leakage ratio at all three levels, but there was no significant difference among three obturation techniques. 3. In groups of MAF #50, the mean leakage ratio of the group using lateral condensation with standard master cone was the highest among those of three obturation techniques at level 1, and this difference was statistically significant(p<0.05). 4 In groups of MAF #60, the groups using lateral condensation with standard master cone had also the highest mean leakage ratio at all levels, but there was no significant difference at level 1 and 2. At level 3, the leakage of the group using lateral condensation with standard master cone was significantly higher than that of the group using continuous wave of obturation(p<0.05). The results of this study suggested that the obturation method using customized master cone or the continuous wave of obturation is more effective for apical sealing than that using standardized master cone when MAF is larger than ＃50.

• The Journal of Korean Academy of Prosthodontics
• /
• v.29 no.1
• /
• pp.233-248
• /
• 1991

The purpose of this study was to qunatatively analyze the stress patterns induced in the abutment, superstructure, supporting bone and to determine the deflection of abutment and superstructure by appling occlusal force to natural teeth supported fixed prostheses and implant-supported fixed prostheses. The analysis has been conducted by using the two dimensional finite element method. The implant and natural tooth-supported bridge has a first molar pontic supported by mandibular second bicuspid and implant posterior retainer, which were rigidly(Model A) or flexible(Model B). The natural teeth-supported bridge has a first molar pontic supported by mandibular second bicuspid and second molar, which were rigidly splinted together(Model C). 63.5kg(Load P1) of localized load on central fossa of first molar pontic and 24kg(Load P2) of distributed load on each occlusal surface were applied respectively. 1. The coronal portion of premolar pontic and posterior abutment in fixed partial denture deflected inferiorly in order of Model B, Model C and Model A under Load P1 and Load P2. 2. Mesial displacement of the coronal portion of premolar showed in Model A, Model B and Model C under Load P1, but mesial displacement of that in Model B and distal displacement of that in Model A and Model C showed under Load P2. 3. Mesial displacement of the coronal portion of the pontic and distal displacement of the coronal portion of posterior abutment showed in Model A, Model B and Model C under Load P1 and Load P2. Displacement in the case of Model B was greater than that of Model A and Model C. 4. In the case Model A under Load P1 and Load P2, high stress apically was concentrated in the mesiocervical portion of the posterior abutment than in the disto-cervical portion of the premolar. 5. In the case of Model B under Load P1 and Load P2 high stress was concentrated in the case of the premolar than in that of posterior abutment and high stress especially was concentrated in the connected portion of pontic and posterior abutment. 6. In the case of Model C under Load P1 and Load P2, high stress was concentrated in the distal area of the cornal portion of premolar and the mesial area of the coronal portion of posterior abutment, and stress pattern was anteroposterially symmetric around the pontic. 7. Load P1 and Load P2 compared, stress magnitude was different but stress pattern was similar in Model A, Model B and Model C. 8. Under Load P1 and P2, stress magnitude in the mesial distal portion and the portion of root apex of the posterior abutment was in order of Model B, Model A and Model C.

• Korean Journal of Environmental Agriculture
• /
• v.7 no.1
• /
• pp.43-51
• /
• 1988

$SO_2$ gas injuries for 19 varieties of 10 species of plants were investigated within a environmentally controlled growth chamber. Visible injuries were observed when exposing the plants either 0, 0.2, 0.4, 0.7 or 1.5ppm of $SO_2$ gas for 5 days from 9 : 00 to 17 : 00 everyday. The results obtained were as follows: 1. Light brown spots were shown on Raphanus sativus(Chunchu, Taeback, Jinjudaepyung), Brassica campestris(Manchun, Josaengmiho, Seoul, Jeonseung), and Capsicum annum(Searona, Hongsanho, Hongilpum); brown spots on Sesamum indicum(Pungnyun, Kwangsan); reddish brown shades on Cleosia cristata; and black brown spots on Perilla frutescens, Calendula officinalis, Chrysanthemum morifolium, and Salvia splendens, respectively. 2. The spotty injuries induced by $SO_2$ gas injuries for 19 varieties of 10 species of plants were investigated within a environmentally controlled growth chamber. Visible injuries were observed when exposing the plants either 0, 0.2, 0.4, 0.7 or 1.5ppm of $SO_2$ gas for 5 days from 9 : 00 to 17 : 00 everyday. The results obtained were as follows: 1. Light brown spots were shown on Raphanus sativus(Chunchu, Taeback, Jinjudaepyung), Brassica campestris(Manchun, Josaengmiho, Seoul, Jeonseung), and Capsicum annum(Searona, Hongsanho, Hongilpum); brown spots on Sesamum indicum(Pungnyun, Kwangsan); reddish brown shades on Cleosia cristata; and black brown spots on Perilla frutescens, Calendula officinalis, Chrysanthemum morifolium, and Salvia splendens, respectively. 2. The spotty injuries induced by SO₂ gas on Raphanus sativus, Callistephus chinensis, Capsicum annum, Perilla frutescens, Calendula officinalis, Salvia splendens, and Sesamum indicum; the many small spots on Chrysanthemum morifolium; and the brown shade on Celosia cristata appeared on the upper surface of the intervein, on the leaf apex area and on the entire upper surface of leaves, respectively. 3. Visual injuries of Capsicum annum(Chunchu), Perilla frutescens, Sesamum indicum(Pungnyun, Kwangsan), and Salvia splendens were developed at 0.4ppm of SO₂ gas fumigation. Brassica campestris(Jeonseung), Capsicum annum(Searona, Hongilpum), and Cleosia cristata, however, showed the injury at 1.5ppm of $SO_2$ gas concentration. 4. Based on the tolerance grade(time when the 1st injury appeared), Raphanus sativus, Perilla frutescens, Sesamum indicum, and Salvia splendens were the most sensitive plants and Chrysanthemum morifolium, Callistephus chinensis, Cleosia cristata, and Calendula officinalis were the plants most tolerant of $SO_2$ gas. gas on Raphanus sativus, Callistephus chinensis, Capsicum annum, Perilla frutescens, Calendula officinalis, Salvia splendens, and Sesamum indicum; the many small spots on Chrysanthemum morifolium; and the brown shade on Celosia cristata appeared on the upper surface of the intervein, on the leaf apex area and on the entire upper surface of leaves, respectively. 3. Visual injuries of Capsicum annum(Chunchu), Perilla frutescens, Sesamum indicum(Pungnyun, Kwangsan), and Salvia splendens were developed at 0.4ppm of $SO_2$ gas injuries for 19 varieties of 10 species of plants were investigated within a environmentally controlled growth chamber. Visible injuries were observed when exposing the plants either 0, 0.2, 0.4, 0.7 or 1.5ppm of $SO_2$ gas for 5 days from 9 : 00 to 17 : 00 everyday. The results obtained were as follows: 1. Light brown spots were shown on Raphanus sativus(Chunchu, Taeback, Jinjudaepyung), Brassica campestris(Manchun, Josaengmiho, Seoul, Jeonseung), and Capsicum annum(Searona, Hongsanho, Hongilpum); brown spots on Sesamum indicum(Pungnyun, Kwangsan); reddish brown shades on Cleosia cristata; and black brown spots on Perilla frutescens, Calendula officinalis, Chrysanthemum morifolium, and Salvia splendens, respectively. 2. The spotty injuries induced by SO₂ gas on Raphanus sativus, Callistephus chinensis, Capsicum annum, Perilla frutescens, Calendula officinalis, Salvia splendens, and Sesamum indicum; the many small spots on Chrysanthemum morifolium; and the brown shade on Celosia cristata appeared on the upper surface of the intervein, on the leaf apex area and on the entire upper surface of leaves, respectively. 3. Visual injuries of Capsicum annum(Chunchu), Perilla frutescens, Sesamum indicum(Pungnyun, Kwangsan), and Salvia splendens were developed at 0.4ppm of SO₂ gas fumigation. Brassica campestris(Jeonseung), Capsicum annum(Searona, Hongilpum), and Cleosia cristata, however, showed the injury at 1.5ppm of $SO_2$ gas concentration. 4. Based on the tolerance grade(time when the 1st injury appeared), Raphanus sativus, Perilla frutescens, Sesamum indicum, and Salvia splendens were the most sensitive plants and Chrysanthemum morifolium, Callistephus chinensis, Cleosia cristata, and Calendula officinalis were the plants most tolerant of $SO_2$ gas. gas fumigation. Brassica campestris(Jeonseung), Capsicum annum(Searona, Hongilpum), and Cleosia cristata, however, showed the injury at 1.5ppm of $SO_2$ gas concentration. 4. Based on the tolerance grade(time when the 1st injury appeared), Raphanus sativus, Perilla frutescens, Sesamum indicum, and Salvia splendens were the most sensitive plants and Chrysanthemum morifolium, Callistephus chinensis, Cleosia cristata, and Calendula officinalis were the plants most tolerant of $SO_2$ gas.

• The korean journal of orthodontics
• /
• v.30 no.3 s.80
• /
• pp.317-333
• /
• 2000

The purpose of this study was to determine the proliferative activity of the osteoblasts and fibroblasts in the midpalatal area and to investigate the adjacent periodontal tissues of individual tooth following rapid expansion of the palate. Ten young adult dogs, aged approximately ten months, were used in the experiment. The experimental design was consisted of 1 week expansion group(Group E1, 3 dogs), 2 week expansion group(Group E2, 3 dogs), 2 week expansion and 2 week retention group(Group E3, 3 dogs), and control group(Group C, 1 dog). For each group, expansion screw was activated one time per day(1/4 turn;$90^{\circ}$) following Hyrax-screw application. The experimental animals in each group were sacrificed at 1, 2 and 4 weeks following palatal expansion. Maxillary tissue blocks were obtained and prepared ior the histomorphologic and immunohistochemical studies. Light mcroscope, polarizing microscope, and soft X-ray apparatus were used in this study, and following results were obtained. 1. In polarizing microscopic study, the expansion groups(E1 & E2) showed blue color representing bone resorption and new bone formation in midpalatal suture area. E3 groups skewed less blue color compared to the E1 and E2 group. But yellow color increased by calcification in the E3 groups. 2. Immunohistochemical study revealed that positive responses of the osteoblasts to PCNA and undifferentiated fibroblasts to EGF in E1 group were somewhat increased. Positive response to PCNA and EGF were increased in fibroblasts and the osteoblasts forming new bone in E2 group. In E3 group, the positive response cell concentrated the periphery of edge of palatal process in both PCNA and EGF. 3. Throughout the expansion period(E1 & E2), light microscopic study showed the edges of the extensive resorption and new palatal processes, indicating bone remodeling within the suture. E3 group exhibited less remodeling of midpalatal suture area. E2 group and E3 group showed cementum formation and resorption at the apex of 3rd premolar and 1st molar E3 group exhibited extensive hyalinized zone on the cervical portion of buccal side of 1st molar. 4. Soft X-ray analysis of E1 group showed hypomineralized defect and microfractures in various parts of the suture areas when compared with control animals. There was no significant difference in the degree of mineralization in the midpalatal suture region between the C and E3 groups. Tooth axis showed tipping of 3rd premolar and 1st molar in the E2 group and E3 group. Based upon these experimental results, it is concluded that the undifferentiated mesenchymal cells always presented in midpalatal suture area following RPE. Differentiated osteoblasts and fibroblasts possess proliferating cellular activity until the 2 week retention period. The posterior teeth are tend to tip buccally as RPE force applied. Retention group exhibited irreversible response with severe hyalinized zone on the buccal surface of the first molar.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.39 no.1
• /
• pp.90-96
• /
• 2012

Supernumerary tooth occurs most frequently at premaxilla area. Followed by mandibular premolar area, mandibular fourth molar area, maxillary paramolar area. Mesiodens are mainly impacted in the palatal area and surgical approach is made at palatal side. The time of surgery remains controversial. In case of inverted or horizontal impacted supernumerary tooth, intraosseous tooth movement and vertical growth of premaxilla makes surgical extraction more difficult. And also the more quantity of removed bone is, the higher degree of difficulty is. Inverted mesiodens of these cases were impacted superior to apex level of adjacent permanent incisor. Although CT examination revealed exact location of impacted tooth, surgical procedure including ostectomy may take a long time more than expected. So, before surgical extraction, it's need to be considered several factors such as necessity of CT taking, degree of difficulty, direction of surgical approach, necessity of general anesthesia etc.

• Journal of East-West Nursing Research
• /
• v.7 no.1
• /
• pp.68-81
• /
• 2002

The purpose of this study is to analyze the type of ego states and stress coping style on female college students who are in the course of nursing study. This study is performed in the view of Transactional Analysis and designed to scrutinize descriptive correlations between the type of ego states and stress coping style. The subject is consists of 144 freshmen and sophomore, 138 junior and senior students group, who are students of K nursing college located in Seoul. The sampling investigation period is on Sept. 14, 2002 to Oct. 26, 2002. The measuring instrument used for Transactional Analysis ego state is 50 items Ego-gram research paper devised by Dusay(1997). For studying coping style, Folkman & Lazarus's measurement(1984) was adopted, which is translated and modified by Han, and Oh,(1990). Health states is adopted by standardized health inspecting instrumental table (Cornell Medical Index:CMI) which is designed for Korean people by Ko and Park(1980) Statistic average and standard deviation were generated by using SPSS PC+, t=test and Pearson correlation. The results were as follows: 1) In the type of ego states on both groups indicated the arithmetic apex NP(maximum value), then the point A was high and the data made a down slope to point AC. In the comparison to type of ego states between two groups, only at point CP, the data value of upper year students represented higher than that of lower year ones by c(t=2.28, p=.023). 2) Stress coping style of whole students were highly and affirmatively dedicated to research. Especially hopeful aspect(t=.67, p=.05), relaxation of tension(t=-2.16, p=.03) made significant difference each other in the view of arithmetic calculation. 3) In view of nursing students' physical health states, there is significant difference in past history(t=2.50, p=.013) and in case of mental health states, there are considerable discrepancies between lower group(73.52) and upper group(75.11)(p<.05). In view of all field, state of tension(t=2.13, p=.048) has difference. 4) While verifying coping style in terms of ego states level between lower and upper students group, In type CP, high level ego states group indicated significant difference on stress coping style area than low leveled group and made such sequences as the central point of problem, In type NP, sequences such as the central point of problem, In type A, the central point of problem, In type FC, hopeful aspect and In type AC, hopeful aspect and indifference were derived significantly different (p<.05). 5) While verifying health state differences in the level of lower and upper ego states, In type FC, low level group(150.29) marked higher point than upper group(145.19), there is remarkable discrepancy and so did whole health state(p=.014), In type AC both mental state(p=.000) and whole health state (p=.015) showed differences. 6) When analyzing correlations between whole students' ego states, copying style and health state, all type of ego state showed differences(p<.001). In correlations between ego state and health state, in type FC physical state had an apex and there are inverse correlations among the other types. Especially, type FC showed inverse correlations with great discrepancies(p<.05). In mental state, type NP(${\gamma}=.198$, p<.001) and type A(${\gamma}=.166$, p<.05) represented straight correlations with remarkable differences. Especially, In type AC showed inverse correlations(${\gamma}=.282$, p<.001). In case of correlations between copying style and health state, indifference(${\gamma}=-.157$) and relaxation of tension(${\gamma}=-.158$) presented great difference(p<.05). In mental state, central point of problem and search for social support showed straight correlations with great discrepancies(p<.05), hopeful aspect and indifference showed inverse correlations with considerable differences(p<.001).