This study was performed to investigate the effects of occlusal appliance on the mandibular position and the mandibular rotational torque movement during speech. For this study, 20 patients with temporomandibular disorders(TMDs) and 20 normal subjects without any signs and symptoms in the masticatory system were selected as the patient group and as the normal group, respectively. Biopak $system^{(R)}$(Bioresearch Inc., Milwaukee, USA) and a sentence of 'Sue is missing her house' were used for recording and for observing of speech pattern. There were five mandibular positions observed in this study, that is, mandibular rest position, 'ssi', 'her', 'ha', and 's' speech position. In each position, slant and A-P distance in sagittal plane, vertical distance and lateral distance in frontal plane were measured. Amount of the mandibular rotational torque movement were measured at 'her', 'ha' speech position and for all through speech movement. Centric relation splint(CRS) was placed in both groups, but anterior or posterior bite plane were placed in normal subjects only. Data collected were processed and analysed by SPSS windows program. The results of this study were as follows : 1. Mandibular positions in both groups were not different before adaptation, with CRS, and after removal, but total amount of the mandibular rotational torque movement was greater in patients. 2. Mandible was slightly placed anteriorly with CRS at 'her' and 'ha' speech position in patients, but was placed anteriorly at all the five positions in normal subjects. 3. Difference with type of occlusal appliance in normal subjects were noted only for vertical distance at 'ssi' and 'ha' speech position, and the distance with CRS were more than that with posterior bite plane. 4. Mandibular rotational torque movement at 'her' and 'ha' speech position was greater in patients, but the difference was disappeared after appliance removal. And the torque movement was greater at 'ha' speech position than that at 'her' speech position in frontal plane. It could be concluded that the adaptation of occlusal appliance showed a tendency to locate the mandible anteriorly during speech in both groups, but did not affect total mandibular rotational torque movement which was greater in patients.
교정치료 영역에서 성인들의 심미적인 요구도가 증가되면서 설측 교정치료는 여러 가지 단점에도 불구하고, 가장 심미적이라는 이유로 많은 주목을 받아왔지만 실제 치아이동을 결정지을 수 있는 브라켓을 부착하는 기준평면의 위치에 대해서는 거의 보고된 바가 없다. 이에 본 연구는 실제 브라켓이 부착되는 평면의 상하 평행이동이나 기울기 변화에 따라 치아이동 양상이 어떻게 변화되는지 알아보고, 바람직한 전치부 치체이동을 얻기 위해서 힘의 적용점을 어디에 두어야 하는지, 그리고 전치부에 어느 정도의 모멘트를 부여해야 하는지 알아보고자 3차원 유한요소법을 이용하여 치아 변위 및 응력분포를 비교 분석하였다. 실험 결과 설측 브라켓 부착평면을 치은연쪽으로 평행이동 혹은 회전이동 시키고 견인하였을 경우, 절단연쪽으로 이동시켰을 때와 비교했을 때 비조절성 설측 경사이동이 감소하기는 하였으나 상하악 전치부 치아들의 설측경사 양상은 지속되었으며, 이러한 양상은 견치 브라켓의 hook 길이를 증가시켜도 계속 나타났다. 이와는 달리 설측 중심평면에 브라켓을 부착하고 각 치아별로 모멘트를 부여하였을 경우 설측 방향으로 개개 치아들의 치체이동이 발생하여 설측 교정치료 시 효과적인 전치부 치아의 후방견인이 가능함을 알 수 있었다.
This study was performed to investigate the reproductibility of eccentric mandibular movements according to preferred chewing side, range of mouth opening, type of lateral guidance and involvement of temporomandibular disorders. 50 patients with temporomandibular disorders and 65 dental students without any signs and symptoms were randomly selected for this study as the patients group and the control group, respectively. For recording and observation of eccentric mandibular movement trajectory, BioEGN$^\textregistered$ of Biopak$^\textregistered$ system (Bioresearch Inc., USA) was used. Each eccentric movement to anterior, right and left side was performed three times similar to the movement pattern for Pantronic Reproducibility Index. mandibular path was analyzed by three dimensional positional change and the three paths from one direction were compared with one another. From this, reproducibility index of one-directional lateral movement could be calculated, and total reproducibility index, named BioEGN reproducibility index(BERI), was also computed from three-directional eccentric movement likewise. BioEGN reproducibility Index could have four value of score by small or large scale, and by outgoing or incoming movement. The data were analyzed by SAS/stat program and the results obtained were as follows: 1. Right side chewing subjects showed more consistent pattern In reproducibility index in comparison between patients group and control group than left chewing subjects have done, and reproducibility was low in patients group. However, there was no difference between the two stoups in bilateral chewing subjects. 2. There were no difference in reproducibility index between preferred chewing side and contralateral side in unilateral chewing subjects whereas reproducibility index in left side on outgoing movement were higher than in right side in bilateral chewing subjects. 3. Difference in total reproducibility index(BERI) between canine guidance group and non-canine guidance group were not observed though difference in reproducibility index on lateral movement were observed in part. 4. There were no difference in reproducibility index between affected side and contralateral side in unilaterally affected patients, and between unilaterally affected patients and bilaterally affected patients in patients group. 5. Highly significant positive correlationship were shown among the four 쇼pes of total reproducibility index(BERI) in total subjects, and range of clinical mouth opening was negatively correlated with BEBI on outgoing movements and with index on outgoing movement to preferred side.
The purpose of this study was to identify the difference of vertical movement of mandible according to Angle's molar relationship and by skeletal factors affect to vertical movement of mandible. 172(age ranged from 20 to 30) subjects who go to college within territory of Kwangju city without any experience of temporomandibular disorder, extraction and orthodontic treatment. were selected for this study. The subjects were classified into class I(male:30, female:49), class II(male:18, female:24) and class III(male:18, female:33) according to Angle's molar relationship. The distance was measured between incisal edge of maxillary and mandibular central incisor and between bottom of central fossa of maxillary and mandibular 1st molar with ruler. The arch length and width were measured on the diagnostic cast. Cephalometrics were taken and then traced. Landmarks were identified and analyzed. 1. Maximal interincisal opening of male is larger than that of female in class I, class II and class III. Among each group maximal interincisal distance is the largest in class III. Maximal intermolar distance of male is superior to that of female in class I, class II, and class III, but there is no siginficant difference among them. 2. On maximal opening movement of Angle's classification class I and class II, total mandibular length, mandibular ramal length, madibular inferior border length and upper arch width were important variables and facial length, upper arch length and lower arch length had negative relationship to that. On maximal opening movement of Angle's class III, the upper arch length, the lower arch length and anterior facial length were important variables especially when compared with class I and II, and upper arch width had negative relationship. These results suggest that maximal opening movement is affected by facial morphology in all classes, but each group is affected by different facial skeletal variables. Accordingly, facioskeletal variables might be considered as diagnosis and treatment to improve the amount of mouth opening.
Complete denture occlusion must be developed to function efficiently and with the least amount of trauma to the supporting tissues. For the preservation of supporting tissues, it is imperative to reduce to a minimum the functional stress induced by dentures. The magnitude of the horizontal component of functional stress contributed by various occlusal teeth forms has not been studied. This study was aimed to investigate the influence of different occlusal teeth forms on the mode of distribution of the stresses in the mandibular tissue, and the displacement of lower dentures during the variant functional movement of mandible for this study three dimensional finite element analysis was used. FEM models were created using commercial software Super Sap for IBM 32 bit computer. The model was composed of 3380 brick elements and 4346 nodes. The results were as follows. 1. The magnitude of stress was similar between two models in centric occlusion, in the case of anatomic model, the stress was concentrated on the buccal side of alveolar ridge beneath the bicuspids. 2. During the protrusive movement, the increasing of stress from the posterior to anterior part of mandible was seen in the case of anatomic model. 3. During the lateral movement, the stress of anatomic model was greater than that of nonanatomic model. 4. The stress of anatomic model was concentrated on the anterior region of residual ridge during the lateral movement. 5. In the case of anatomic model the anterior part of denture was displaced severely at the centric and lateral position, but the denture of nonanatomic model was displaced minutely at the protrusive and lateral position.
The purpose of this study was to investigate the mandibular opening and closing movements at mandibular incisor region and clinical rest position in normal subject using the newly developed electric mandibular movement analyzing device, (M.K.G.-K6 diagnostic system, Myo-tronics Inc. Seattle, WA, U.S.A.) The 58 normal subjects, who were students of the College of Dentistry, Chonbuk National University, were selected according to sampling criteria. The obtained results were as follows: 1. There was no significant difference of distribution of opening and closing movement patterns at mandibular incisor region between male and female. There was significant difference between habitual and maximum movement patterns both in sagittal and frontal plane. 2. Although the percentage of distribution of crossover pattern was highest in all cases, but there were significant differences between patterns only at habitual opening and closing movement in sagittal plane. 3. The mean of maximum opening was $47.29{\pm}4.68mm$ in male and $42.15{\pm}4.95mm$ in female. Therefore the mean of maximum opening was larger in male than in female. 4. The mean of maximum laterotrusion in frontal trajectory was larger to the left than to the right. Also the proportion of left deviation at maximum opening position was larger than that of other cases. 5. The mean of maximum opening and closing velocity was higher in male than in female and the mean of closing velocity was higher than that of opening velocity. Also the amount of separation from the centric occlusion was higher in maximum closing velocity than in maximum opening velocity. 6. Clinical rest position was $1.70{\pm}0.99mm$ inferior, $0.74{\pm}0.57mm$ anterior, $0.99{\pm}0.51mm$ right from centric occlusion and the A/V ratio was 1:2.7.
Alveolar distraction osteogenesis (ADO) has been regarded as an acceptable treatment for the alveolar bone deficiency. For ADO at anterior maxillary area, the vector should be oriented to forward and down-ward direction to get an adequate occlusion with mandibular teeth and to increase bone length and width for implant placement. However, the conventional commercial distraction devices for ADO are designed to allow mainly downward movement of alveolar segment, even though a forward movement can be obtained a little by controlling of inclination of device. To make ADO with controllable bidirectional vector possible, we used customized devices using self-manufactured ABDUL (Alveolar Bone Distractor Using Lag screw principle) and commercial orthodontic palatal expansion device ($Hyrex^{(R)}$). In all cases (n = 4), ADO could be performed successfully and dental implants were able to placed with adequate occlusion. We report the procedures, advantages and disadvantages of these methods.
In this study, 88 dental students were examined to evaluate the relationship between occlusal states and TM disorders for the epidemiologic study of TM disorders. The clinical evaluation were composed of mandibular movement, TMJ noise, occlusal states and muscle palpation. The following results were disclosed. 1. The frequencies of pain on mandibular movement were 3.4% on maximum opening, 1.13% on protrusion and no pain on laterotrusion. 2. The frequencies on TMJ sound were 21.6% in click, 1.13% in crepitus. 3. The frequency of tenderness on palpation was 12.5% on extra oral, intraoral and neck muscles, tenderness on palpation of TMJ capsule were reported 5 cases, and 4 of them were female. 4. The distribution of Angle's classification was found 79.5% in class I, 4.5% in clasII-div.1 and 15.9% in class III. There was no significant differences on TM disorders between Angles classifications. 5. There was no significant differences on TM disorders between the subjects of canine guided occlusion and group function occlusion, and also for the differences between the subjects of nonworking side interferences and no interferences on laterotrusion. 6. There was no significant differences on TM disorders between the subjects of anterior teeth trauma in C.C. and no anterior teeth trauma, but there were significant differences between the subjects of posterior protrusive contact and no posterior protrusive contact.
Journal of the Korean Association of Oral and Maxillofacial Surgeons
/
제26권2호
/
pp.172-178
/
2000
When we establish treatment planning of facial asymmetry, we must predict each asymmetrical element that will be changed upon coronal, axial, sagittal plane. At the visual point, prediction of the change of coronal plane is most important. It is important difference between Rt. and Lt. mandibular angle belonging to posterior coronal plane, as well as anterior coronal plane, such as upper and lower incisor, or midline of chin point. Several methods for control bulk of mandibular angle are additional angle shaving after osteotomy, grinding contact area between proximal and distal segment for decrease the volume, or bone graft for increase the volume. But, at the point of bimaxillary surgery, transverse position of posterior maxilla is an important factor for control it. So, we would report transverse movement of posterior maxilla for decrease asymmetry on the posterior coronal plane of face, that is, asymmetry of mandibular angular portion.
Recently the instantaneous centre concept has been used to understand the biomechanics by which a tissue derangement causes a mechanical derangement in temporomandibular joint. In this study, four male subjects without temporomandibular joint disorder and malocclusion were selected for the determination of the instantaneous centre of rotation (I.C.R) in the mandibular movement. The habitual opening and closing paths were recorded on the sagittal plate by two spring pencils attached on the lower anterior teeth which was designed for this study, and the I.C.R. was calculated by the computer program of Rouleaux's method. Also the computer graphic opening and closing movements of mandible were obtained according to the determined I.C.R. The results obtained from this study were as follows. 1. The instantaneous centres of rotation were not positioned within the condyle in the mandibular opening and closing movement. 2. There was some similarity between the anatomical curvature of the articular emience and the movement pattern of condyle. 3. The opening path and the closing path of the most superior pl)int of the condyle stowed a slight difference. 4. At the early stage of the habitual opening movement, the condyle was moved downward. 5. The opening and closing mandibular movements were simulated by the instantaneous centre of rotation which was determined by the computer program of Rouleaux's method.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.