• Journal of Electrical Engineering and Technology
• /
• v.9 no.6
• /
• pp.2019-2024
• /
• 2014

This paper presents a method to optimize the design of a planar-type antenna and reduce the number of design parameters for rapid computation. The electromagnetic characteristics of the structure are analyzed, and Taguchi method is used to identify critical design parameters. Adaptive particle swarm optimization, which has a faster convergence rate than particle swarm optimization, is used to achieve the design goal effectively. A compact dual-band USB dongle antenna is tested to verify the advantage of the proposed method. In this case, we can use only five selected geometrical parameters instead of eighteen to accelerate the optimization of the antenna design. The 10 dB bandwidth for return loss ranges from 2.3 GHz to 2.7 GHz and from 5.1 GHz to 5.9 GHz, covering all the WiBro, Bluetooth, WiMAX, and 802.11 b/g/n WLAN bands in both simulation and measurement. The optimization process enables the antenna design to achieve the required performance with fewer design parameters.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.682-685
• /
• 2014

In this paper, an improved designed of the circularly polarization antenna for sensor node. Stochastic optimization algorithms of Particle Swarm Optimization (PSO) and Adaptive Particle Swam Optimization(APSO) are studied and compared. To verify that the APSO is working better than the standard PSO, the design of a circularly polarization antenna is shows the optimized result with 27 iterations in the APSO and 41 iterations in th PSO.

• Proceedings of the KIEE Conference
• /
• 1994.07b
• /
• pp.1207-1209
• /
• 1994

An optimization technique applicable to the Yagi-Uda antenna was proposed in this paper. An objective function, which is the gain of the antenna in our case, was computed using method of moments. Design variables for the Yagi-Uda antenna were chosen with lengths, positions and diameters of the antenna elements. For the optimization process, the evolution strategy technique was adopted. The results were compared with existing results and showed better performances.

• International Journal of Computer Science & Network Security
• /
• v.23 no.10
• /
• pp.67-72
• /
• 2023

This paper portrays the design and optimization of a wideband four element triangular dielectric resonator antenna (TDRA) using PSO. The proposed antenna's radiation characteristics were extracted using Ansoft HFSS software. At a resonant frequency of 5-7 GHz, the four element antenna provides nearly 21 percent bandwidth and the optimized gives 5.82 dBi peak gain. The radiation patterns symmetry and uniformity are maintained throughout the operating bandwidth. for WLAN (IEEE 802.16) and WiMAX applications, the proposed antenna exhibits a consistent symmetric monopole type radiation pattern with low cross polarisation. The proposed antenna's performance was compared to that of other dielectric resonator antenna (DRA) shapes, and it was discovered that the TDRA uses a lot less radiation area to provide better performance than other DRA shapes and PSO optimized antenna increases the gain of the antenna

• Journal of Electrical Engineering and Technology
• /
• v.10 no.4
• /
• pp.1780-1785
• /
• 2015

In this paper, the adaptive particle swarm optimization (APSO) algorithm is employed to design a gain-enhanced antenna with a reflector for energy harvesting. We placed the reflector below the main radiating element. Its back-radiated field is reflected and added to the forward radiated field, which could increase the antenna gain. We adopt the adaptive particle swarm optimization (APSO) algorithm, which improves the speed of convergence with a high frequency solver. The result shows that performance of the optimized design successfully satisfied the design goal of the frequency band, gain and axial ratio.

• Journal of IKEEE
• /
• v.22 no.3
• /
• pp.793-799
• /
• 2018

An improved design of Ultra Wide Band(UWB) Bow-Tie antenna, which can control an enhanced wide stop-band, is presented. The mutually coupled slot-pair improves and controls the rejection band. The UWB antenna is composed of an electromagnetically coupled Bow-Tie patch and a parasitic ground patch, whose working frequency is extended to full UWB range in this work. By adding slot-pairs on the main patch and optimizing, they can give any requested wide rejection bands and sharp skirt characteristics, as is often required for UWB antennas and multi-band antennas. All the parameters are precisely calculated by an adequate optimization method. The Particle Swarm Optimization(PSO) technique is appropriately adopted. The proposed design and method is proved to give and control the sharp-skirt wide stop-band to UWB Bow-Tie antennas.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.5
• /
• pp.411-416
• /
• 2014

In this research we present design optimization methods for a vehicle-mounted satellite antenna positioner. Our initial antenna positioner was conservatively designed to satisfy a worst case scenario where wind blew across the positioner at the speed of 120 km/h. Investigating stresses and safety based on Finite Element Methods (FEM), we find reflector support frames can be optimized to significantly reduce the weight of the positioner system. Thus, we optimize the reflector support frame from the given initial design while considering weight, maximum stress, maximum allowable deflection, cross section, and thickness. As a result, Shape C and the thickness of 2 mm are determined for the cross section of the reflector support frame. Applying this result, the weight of the new antenna positioner is 57.343 kg, which is decreased by 10.74% compared to the initial conservative design.

• ETRI Journal
• /
• v.26 no.5
• /
• pp.437-442
• /
• 2004

In this paper we address the problem of capacity optimization in a Universal Mobile Telecommunication System (UMTS) radio network. We present an optimization algorithm for finding the best settings of the antenna tilt and common pilot channel power of the base stations. This algorithm is a parametric method, based on a set of rules. We evaluated our optimization technique on a virtual network scenario with 75 cells. For this scenario we show an increase in capacity compared to the initial settings of about 60 percent.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.10
• /
• pp.57-62
• /
• 2009

This study proposes the optimization and numerical analysis of the antenna circuit for antenna design with 13.56 MHz as transmitting wireless power, for calculating the dose radiation exposure to the real time. The 13.56 MHz of the antenna frequency bands is used to the loop antenna which is a induced current for transmitting the power with wireless the reader to the tag. The study compared to the real measurement value as calculating the value of the inductance and capacitance through the numerical analysis for the antenna LC resonance using the theory of the electromagnetic induction method. We tried to search for the resonance point as the voltages of both sides of antenna coil by the scope measures of the peak point, as we tried to be variable the resonance capacitor for the optimization tuning of the antenna circuit and the matching of the antenna port. We convince our research contributes to help the design and application technology of the wireless power transmit system which is received power supply with wireless.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.5
• /
• pp.483-491
• /
• 2015

This paper describes the design optimization of parasitic elements used for TACAN broadband antenna. We deployed parasitic elements arranged in a circular array to electronically rotate the antenna instead of employing a mechanically rotated antenna to generate the composite radiation pattern of 15 Hz and 135 Hz including bearing information and to meet the harmonic contents specification of MIL-STD-291C. We performed the simulation for optimization of the parasitic elements and fabricated the antenna composed of 16 parasitic elements of 15 Hz and 63 parasitic elements of 135 Hz. With harmonics magnitude reduction by increasing the number of steps using vector composition of the reflectors, the measured result meets the specification of MIL-STD-291C.