• Journal of the Optical Society of Korea
• /
• v.18 no.3
• /
• pp.207-216
• /
• 2014

In this work, we report detailed numerical analysis of the near-elliptic core index-guiding triangular-lattice and square-lattice photonic crystal fiber (PCFs); where we numerically characterize the birefringence, single mode, cut-off behavior and group velocity dispersion and effective area properties. By varying geometry and examining the modal field profile we find that for the same relative values of $d/{\Lambda}$, triangular-lattice PCFs show higher birefringence whereas the square-lattice PCFs show a wider range of single-mode operation. Square-lattice PCF was found to be endlessly single-mode for higher air-filling fraction ($d/{\Lambda}$). Dispersion comparison between the two structures reveal that we need smaller lengths of triangular-lattice PCF for dispersion compensation whereas PCFs with square-lattice with nearer relative dispersion slope (RDS) can better compensate the broadband dispersion. Square-lattice PCFs show zero dispersion wavelength (ZDW) red-shifted, making it preferable for mid-IR supercontinuum generation (SCG) with highly non-linear chalcogenide material. Square-lattice PCFs show higher dispersion slope that leads to compression of the broadband, thus accumulating more power in the pulse. On the other hand, triangular-lattice PCF with flat dispersion profile can generate broader SCG. Square-lattice PCF with low Group Velocity Dispersion (GVD) at the anomalous dispersion corresponds to higher dispersion length ($L_D$) and higher degree of solitonic interaction. The effective area of square-lattice PCF is always greater than its triangular-lattice counterpart making it better suited for high power applications. We have also performed a comparison of the dispersion properties of between the symmetric-core and asymmetric-core triangular-lattice PCF. While we need smaller length of symmetric-core PCF for dispersion compensation, broadband dispersion compensation can be performed with asymmetric-core PCF. Mid-Infrared (IR) SCG can be better performed with asymmetric core PCF with compressed and high power pulse, while wider range of SCG can be performed with symmetric core PCF. Thus, this study will be extremely useful for designing/realizing fiber towards a custom application around these characteristics.

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.254-255
• /
• 2001

매질의 공진주파수 근처에서는 주파수가 커짐에 따라 매질의 굴절률이 감소하는 비정상 분산 특성을 나타낸다. 본 실험에서는 세슘원자의 비정상 분산 특성을 실험적으로 관측할 수 있는 방법을 연구하였다. 가열된 세슘원자셀(16$0^{\circ}C$)에 CS D$_2$ 전이선에 공진되는 레이저빔을 입사하여 레이저의 주파수에 따른 레이저빔의 굴절각도를 측정하였다(그림1) 레이저빔의 굴절각의 변화를 용이하게 측정하기 위해 원자셀 벽에 굴절률이 1.5 인 프리즘을 장착하고 원자빔을 전반사의 임계각보다 조금 작은 각도로 입사하여 투과광의 굴절각을 측정하였다. (중략)

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.22-23
• /
• 2001

광결정(Photonic crystals)은 유전체를 주기적으로 배치한 구조인데, 이런 구조에 의해 1차원, 2차원, 또는 3차원적으로 빛을 제어할 수 있다. [1] 이런 주기적인 구조로 인해 광결정 내에서는 특정에너지와 특정 방향을 가진 빛이 진행하지 못하는 광밴드 갭(photonic band gap)뿐만 아니라 밴드구조와 밀접한 관계가 있는 비정상적인 광분산이 나타나기도 한다. 이러한 비정상적인 광분산에는 입사빔의 미세한 파장변화에 따른 PC내에서의 급격한 빛의 꺾임이나, 단일 파장의 입사빔이 두갈래로 갈라지는 현상, 또는 negative나 1보다 작은 굴절효과 등이 있는데, 이러한 현상을 해석하기 위한 것으로 광결정내의 고정된 진동수에 해당하는 점들을 2차원 k공간에서 표시한 분산곡선(dispersion surface)이 도입되었다. [2] (중략)

• Economic and Environmental Geology
• /
• v.44 no.1
• /
• pp.1-10
• /
• 2011

The geology of the Pacitan district which occupies Southern mountain zone in the southwestern margin of East Java, Indonesia, consists of a pile of clastics and pyroclastics grading upwards into a series of sediments of Middle Miocene age which are intruded by a number of quartz porphyries and subvolcanic dacitic to andesitic bodies in after that time. The geochemical exploration in the Pacitan district to find out anomalous areas related with metallic mineral dispersion from the concealed ore deposits had been carried out using traditional exploration techniques of geological mapping, stream sediment, panned concentrate and outcrop sampling. The anomalous zones of each element were detected in the following areas: Gempol for Cu; Jompong for Au; Kasihan for Cu-Pb-Zn. The strongest Cu-Pb-Zn anomalous values are overlapped at the Kasihan area. The geochemical survey of soil was conducted with the geological survey at the Kasihan area. The statistical values were calculated by the statistical analysis method. The patterns for Cu, Pb and Zn are similar to the normal distribution. The anomalous values of copper-lead-zinc and/or copper and zinc are overlapped at five zones surrounding quartz porphyry at the central part of the Kasihan area. The area was interpreted and chosen as an anomalous zone related with stockwork and skam mineralization, extending to approximately NNW-SSE direction.

• Korean Journal of Crystallography
• /
• v.16 no.1
• /
• pp.21-29
• /
• 2005

The crystal structure of an enantiomeric compound di-(2-picolyl)sulfur dichloro zinc(II), $C_{12}H_{12}N_2SCl_2Zn$, could be elucidated with two space groups $P4_12_12\;and\;P4_32_12$. However, its absolute configuration with the space group $P4_12_12$ was confirmed by means of the effect of anomalous dispersion.

• Geophysics and Geophysical Exploration
• /
• v.14 no.1
• /
• pp.42-49
• /
• 2011

To locate anomalous features including seepage pathways through the Daeryong earth-fill dam, P and Rayleigh waves were recorded along a 250-m profile on the crest of the dam. Seismic energy was generated using a 5-kg sledgehammer and detected by 24 4.5-Hz vertical-axis geophones installed at 3-m intervals. P-wave and apparent S-wave velocities of the reservoir dam and underlying bedrock were then inverted from first-arrival traveltimes and dispersion curves of Rayleigh waves, respectively. Apparent dynamic Poisson's ratios as high as 0.46 were obtained at the base of the dam near its north-east end, where an outlet conduit occurs, and in the clay core body near the south-west end of the profile where the dam was repeatedly grouted to abate seepage before our survey. These anomalies of higher Poisson's ratios in the upper part of clay core were also associated with effusion of grout on the downstream slope of the dam during post-survey grouting to abate leakage. Combining P-wave traveltime tomography and inversion of Rayleigh wave velocities was very effective in detecting potential pathways for seepage and previous grouted zones in this earthen dam.

• Journal of the Optical Society of Korea
• /
• v.8 no.2
• /
• pp.59-64
• /
• 2004

The response of a single-mode fiber to a sinusoidally modulated input has been studied to see its utility in measuring system performance in the presence of fiber nonlinearities. The sinusoidally modulated signal models an alternating bit sequence of ones and zeros in on-off keying. The sinusoidal response of normally dispersive fiber shows a strong correlation with eye-opening penalty (EOP) over a wide range of the nonlinearity parameter N (0.1 ＜ N$^2$＜ 100). This result implies that the measurement of the sinusoidal response can be an alternate way of measuring EOP without having a long sequence of randomly modulated input bits. But in the anomalous dispersion region, the sinusoidal response has a much more limited range of application to estimate system performance.

• Proceedings of the IEEK Conference
• /
• 2000.06b
• /
• pp.76-79
• /
• 2000

The 3$\mu\textrm{m}$-thick PVDF (Polyvinyiidene fluoride) thin film have been prepared using physical vapor deposition with electric field, and its FT-IR specrum, dielectric property and electric conduction phenomenon have been investigated. Since the characteristic peaks ate detected at 509.45 and 1273.6〔cm〕 in the FT-IR spectrum, we are confirmed that the ${\beta}$ -phase is dominant in the PVDF thin film. In the results of dielectric properties, the PVDF thin film shows anomalous dispersion, i.e. gradual decrease of dielectric constant with increase of frequency, and also that the dielectric absorption point changes from 200Hz to 7000Hz with increasing temperature of thin film, which is consistent with the Debye's theory. The activation energy (ΔH) obtained from temperature dependence of dielectric loss is 21.64 ㎉/㏖. We confirm that the electric conduction mechanism of PVDF thin film is dominated by ionic conduction by investigating the dependence of the leakage current of the thin film on the temperature and the electric field.

• Journal of the Optical Society of Korea
• /
• v.8 no.4
• /
• pp.163-167
• /
• 2004

We propose and demonstrate an external optical modulation method based on TE/TM-mode absorption nulls in a Multiple Quantum Well(MQW) Fabry-Perot laser diode(FP-LD). The center wavelength of the absorption nulls is rapidly shifted to short-wavelength by the small current change(~1mA) in the FP-LD, which can modulate an optical signal with more than 10 dB of extinction ratio(ER). The shift of the center wavelength comes from the refractive index change due to anomalous dispersion and the plasma effect in MQW FP-LD waveguide. Non-inverting and inverting signals are made by TE- and TM-mode absorption nulls at 155.52 Mbps and BERs for the signals are measured.

• Journal of Pharmaceutical Investigation
• /
• v.35 no.6
• /
• pp.453-460
• /
• 2005

4-Aminopyridine (AP) is a potassium channel blocker used in the treatment of neurological disorders such as multiple sclerosis and Alzheimer disease. AP‘s window of therapeutic effect appears to correlate with its plasma halflife (3.5 hours). It demonstrates pH-dependent solubility because of a weakly basic drug. In addition, the resulting release from conventional matrix tablets decreases with increasing pH-milieu of the gastrointestinal tract. The aim of this study is to design sustained release matrix tablet containing AP, overcoming this problem. $Eudragit^{\circledR}$ L 100 (EuL) and sodium alginate were used in an effort to achieve pH independent drug release. The effect of sodium alginate and EuL on drug release from matrix tablet was investigated. The drug release behavior from the different tablets was analyzed by $t_{20%},\;t_{40%},\;t_{60%}$, The exponential diffusion coefficient n, kinetic constant K were calculated according to the Korsmeyer-Peppas equation. The drug release from matrix tablets prepared with sodium alginate was decreased with increasing the content of sodium alginate in pH 7.4 while there is no significant difference in pH 1.2. The exponent n values were determined to be approximately 0.5 and 0.8 respectively, in both pH 1.2 and 7.4. These values indicate diffusion-based anomalous mechanism and erosion-based anomalous mechanism, respectively. The drug release from sodium alginate matrix tablets prepared with solid dispersion of EuL containing drug showed a slow drug release in an acidic medium and a more fast drug release in phosphate medium, compared with sodium alginate matrix tablets prepared with physical mixture. These results may be attributed to the gel forming ability of sodium alginate and pH dependent solubility of EuL. Therefore, sustained-release AP matrix tablets using sodium alginate and EuL were successfully prepared.