• Journal of the Korean Wood Science and Technology
• /
• v.42 no.1
• /
• pp.58-67
• /
• 2014

We investigated the mechanical properties of Korean red pine (Geumgangsong, Pinus densiflora forma erecta Uyeki) of Uljin province in Korea as a basic research to investigated the material properties. Compressive strength of Korean red pine was $36.2N/mm^2$, which was slightly lower than the pine (Pinus densiflora S. et Z.) in Korea. The compressive strength of Korean red pine showed the maximum value at a distance of 60 mm from the pith. Bending strength of Korean red pine was $76.5N/mm^2$, which was slightly higher than the pine (Pinus densiflora S. et. Z.) and nut pine (Pinus koraiensis) in Korea. Similar to the compressive strength, bending strength of Korean red pine showed the maximum value at a distance of 60 mm from the pith. On the other hand, the shearing strength showed the maximum value at part of including the pith. This result does not coincide with the results of compressive and bending strength, in consideration of the specific gravity, which is consistent. Surface hardness of Korean red pine was $43.7N/mm^2$ in cross section, $12.0N/mm^2$ in radial section and $13.7N/mm^2$ in tangential section respectively. The mechanical properties of Korean red pine were similar to the pine and nut pine having a similar specific gravity. The mechanical properties were greatly affected on the specific gravity than the annual ring width.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.28 no.4
• /
• pp.421-427
• /
• 1995

To know the variation in the growth of the sea urchin, Pseudocentrotus depressus according to their localities, three different populations including the culture populations, the released populations, and the wild populations were investigated using the cluster analysis. For this purpose, pigment banding pattern on the genital plate was used as an age character. The population composed of the same year class was born between September 25th and October 5th every year. The population of 9 to 10 months old had no $r_1,\;whereas\;r_1$, was observed in the population of either 1 year and 10 or 11 months old, and both $r_1,\;and\;r_2$ in the population of either 2 year and 9 or 10 months old. Therefore, $r_1,\;and\;r_2$ radius were regarded as an annual ring. Growth in the culture populations was much better than that In either the released or the wild populations. However, when the cultured populations composed of 8 to 12 mm in test diameter was released to the shove near a culture farm, its growth appeared to be similar to that of the wild Populations. The wide distribution patterns of test diameter measured from the same year class of both the cultured and the wild populations were probably due to either long spawning period or growth differences between individuals. Except Yamaguchi and Cheju populations, the move closely located populations showed the more similar growth pattern. However, the growth of Cheju population appeared to be similar to that of Aba, Mogi, Toishi rather than Kasiwazima although Cheju Island was more closely located with Kasiwazima than other localities. In addition, the population of Yamaguchi, located at the highest latitute, revealed the similar growth pattern to that of Nomozaki, located at the lowest latitute.

• Journal of Korean Society of Forest Science
• /
• v.79 no.1
• /
• pp.1-15
• /
• 1990

In this study the stem analysis program, which can be operated with personal computer was developed to reduce time and cost of calculation, and to increase accuracy of analysis. The stem analysis method used in this program was compared with other methods. The results obtained were as follows : The value, 1/100mm measured from the latest annual ring measurement machine (Jahrringme${\beta}$geraete Johan Type II) was automatically inputed to the computer and saved into given file name. Turbo Pascal program was written to do this. The measured data was analyzed by stem analysis calculation program written by Fortran-77. Volume and height increments were approximated by spline function, and diameter of the stem disk was calculated by quadratic mean method. The increment values calculated by the programs were printed annually and in every five-year. Stem analysis diagram and several increment graphs were also easily printed. The result compared between those analysis methods showed that quadratic mean could reduce the error caused from eccentric pith. When the stem taper curve method, approximated by spline function, was used in the calculation of tree height and volume, increments would be more exactly calculated.

• Journal of Korean Society of Forest Science
• /
• v.99 no.6
• /
• pp.855-862
• /
• 2010

The objectives of this study were to analyze vegetation types and stand structures of the red pine (Pinus densiflora) in Kangwon southern region for stable and sustainable forest management. The pine forests in study sites were classified into 4 communities, 2 groups, so total 6 vegetation units. Species with high constance degree were Quercus mongolica, Rhus trichocarpa, Lindera obtusiloba, Lespedeza maximowiczii, Quercus serrata, Spodiopogon sibiricus, Aster scaber and Fraxinus sieboldiana. In the importance value(I.V.) analysis of each layer, P. densiflora showed highly in tree layer while in other layers competitive broad-leaved species such as Quercus spp. were high. P. densiflora also showed large size of DBH, while broad-leaved species distributed middle and small DBH. The annual ring growths of P. densiflora and competitive broadleaved species were variable according to area, site condition, tree year and species, it is considered that appropriate silvicultual practice methods should be employed to remove rival broad-leaved species for maintenance of sustainable red pine forests considering the characteristics of each stand.

• Journal of the Korean Wood Science and Technology
• /
• v.34 no.1
• /
• pp.15-22
• /
• 2006

ln order to manage efficiently many ancient wooden buildings, which have been preserved as cultural properties in Korea, the internal state of wood members should be evaluated exactly and periodically by a NDE (non-destructive evaluation) method. A research project was planned to develop an X-ray CT (computed tomography) system as a NDE method for wood, which could be easily applied in field. This paper includes the first part of this project. First of all, to establish a measuring procedure of wood density using X-ray radiography, the correlation between X-ray intensity and the film brightness was evaluated. Also, initial X-ray intensity was quantified with various radiate conditions controlled by the tube voltage and tube current. And then, the effects of density, annual ring angle, and thickness on the mass attenuation coefficient of wood were examined. Finally, Beer's law was modified with the above results and adopted to calculate the density of wood. As a result of this study, the measuring procedure of wood density was established using a portable soft X-ray device and this procedure was verified with some small wood specimens. This results will he used valuably for the following researches to develop a portable X-ray CT system.

• Korean Journal of Crystallography
• /
• v.4 no.2
• /
• pp.74-85
• /
• 1993

Single crystals of LiNbO3 have found extensive application in electro-optic and nonlinear optic devices. However, laser-induced refartive index inhomogeneities, which have been labeled opical damage impose limits on device optical damage in LiNbO3 is imporved if more than 4.5 rml% MgO is added to the melt The laser damage thrueshold increased as much as 100 times better then that of undoped crystals. The MgO doped cystal has thus been urterlsiv81y studied since then. In the study, Mgo:LiNbOs(MLA) single crystals dopsd with 0, 2.5, 5.0, 7.5, 10.0 mol% MgO have been grown by the czocrualski technique. The metls were prepared in the platinum crluible and 15∼20mm diameter crystals were grown with a length of 20∼30mm in a resitance heater. The growth rate was 2.5mm/hr, the rotation speed 15rpn. Before sawing MLN single crystals were annealed for 24 hours under atmosphere at a temperature of 1080℃. After sawing, we have found an annual ring cross section of MNA crystals only in the direction of perpendicilar to the c-axis. Nonuniform dispusion of MgO was pointed out that the cuties of the state of oxide were strongly affected by oxygen partial pressure in.

• Journal of the Korean Wood Science and Technology
• /
• v.10 no.1
• /
• pp.38-46
• /
• 1982

The research was carried out to determine the division of juvenile and adult wood from the pattern of variables of wood quality indicators, to investigate general low of the size of juwenile wood and to study the characteristics of juvenile and adult wood. For this study some trees of Pinus koraiensis were selected and several wood quality indicators such as annual ring width. late wood percentage, tracheid length tracheid diameter, wall thicknes, and microfibril angles were measured. The results of this study were summaried as follows. 1) Juvenile and adult wood can be divided into radial variations of wood quality indicators. In this study juvenile wood might be classified as a large fluctuated region of radial wood quality variations in the nearest part to pith. 2) Juvenile wood was indicated as a part of nearly cylinderical shape, averaging 6-11cm in radius, near pith. 3) Number of rings from pith of juvenile wood was about 12-20 and was nearly constant in uniform growth trees among the forest stands. 4) Usually adult wood was formed within the about 5-10m above ground.

• Korean Journal of Environmental Agriculture
• /
• v.40 no.3
• /
• pp.211-218
• /
• 2021

BACKGROUND: Fine particulate matter (PM_2.5) is produced by chemical reactions between various precursors. PM_2.5 has been found to create greater human risk than particulate matter (PM₁₀), with diameters that are generally 10 micrometers and smaller. Ammonia (NH₃) and nitrogen oxides (NOx) are the sources of secondary generation of PM_2.5. These substances generate PM_2.5 through some chemical reactions in the atmosphere. Through chemical reactions in the atmosphere, NH₃ generates PM_2.5. It is the causative agent of PM_2.5. In 2017 the annual ammonia emission recorded from the agricultural sector was 244,335 tons, which accounted for about 79.3% of the total ammonia emission in Korea in that year. To address this issue, the agricultural sector announced the inclusion of reducing fine particulate matter and ammonia emissions by 30% in its targets for the year 2022. This may be achieved through analyses of its emission characteristics by monitoring the PM_2.5 and NH₃. METHODS AND RESULTS: In this study, the PM_2.5 concentration was measured real-time (every 1 hour) by using beta radiation from the particle dust measuring device (Spirant BAM). NH₃ concentration was analyzed real-time by Cavity Ring-Down Spectroscopy (CRDS). The concentrations of ozone (O₃) and nitrogen dioxide (NO₂) were continuously measured and analyzed for the masses collected on filter papers by ultraviolet photometry and chemiluminescence. CONCLUSION: This study established air pollutant monitoring system in agricultural areas to analyze the NH₃ emission characteristics. The amount of PM_2.5 and NH₃ emission in agriculture was measured. Scientific evidence in agricultural areas was obtained by identifying the emission concentration and characteristics per season (monthly) and per hour.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.5
• /
• pp.525-534
• /
• 2017

The study aims to observe the cellular anatomical properties of Dahurian larch and Japanese larch for the species identification. In addition, other factors - the ring width, tracheid length, density, and strength - were compared and analyzed to clarify their physical and mechanical properties. To the end, three Dahurian larch trees and three Japanese larch trees by each diameter class were collected as specimens from Jeongseon-eup, Jeongseon-gun, Gangwon-do, to conduct a stem analysis. It was found that the average stand age, average diameter at breast height, and average tree height of three Dahurian larch trees and Japanese larch trees were 74 years and 51 years, 442 mm and 352 mm, and 26.1 m and 20.8 m, respectively. The cellular anatomical difference between Dahurian larch and Japanese larch can be usually found by spiral thickening, considering that it doesn't occur in Dahurian larch at all, while rarely does in the ray tracheids of Japanese larch. However, in this study, spiral thickening was not observed in the radial section of Japanese larch. The average annual growth diameters measured at 1.2 m-height of Dahurian larch and Japanese larch were 5.167 mm and 5.954 mm, respectively. Meanwhile, arboreal growth of Japanese larch was observed to be higher than that of Dahurian larch. In the physical properties test, it was measured that the latewood proportion and oven-dry density of Dahurian larch with low annual diameter growth were higher than those of Japanese larch, while the mechanical properties of Dahurian larch wood were measured 2-7% higher than those of Japanese larch wood. The data obtained from this study are expected to be used as the basic reference for species identification between Dahurian larch and Japanese larch by DNA analysis.

• Journal of Korean Society of Forest Science
• /
• v.16 no.1
• /
• pp.33-62
• /
• 1972

Pitch pine (Pinus rigida Miller) in Korea has become one of the major silvicultural species for many years since it was introduced from the United States of America in 1907. To attain the more rational wood utilization basical researches on wood properties are primarily needed, since large scale of timber production from Pitch Pine trees has now been accomplishing in the forested areast hroughout the country. Under the circumustances, this experiment was carried out to study the wood anatomical, physical and mechanical properties of Pitch Pine grown in the country. Materials used in this study had been prepared by cutting the selected pitch pine trees from the Seoul National University Forests located in Suwon. To obtain and compare the anatomical and physical properties of the different parts of tree such as stem, branch, top and rootwood, this study had been divided into two categories (anatomical and physical). For the anatomical study macroscopical and microscopical features such as annual ring, intercellular cannal, ray, tracheid, ray trachid, ray parenchyma cell and pit etc. were observed and measured by the different parts (stem, branch, root and topwood) of tree. For the physical and mechanical properties the moisture content of geen wood, wood specific gravity, shrinkage, compression parallel to the grain, tension parallel and perpendicular to the grain, radial and tangential shear, bending, cleavage and hardness wree tested. According to the results this study may be concluded as follows: 1. The most important comparable features in general properties of wood among the different parts of tree were distinctness and width of annual ring, transition from spring to summerwood, wood color, odor and grain etc. In microscopical features the sizes of structural elements of wood were comparable features among the parts of tree. Among their features, length, width and thickness of tracheids, resin ducts and ray structures were most important. 2. In microscopical features among the different parts of tree stem and topwood were shown simillar reults in tissues. However in rootwood compared with other parts on the tangential surface distinctly larger ray structures were observed and measured. The maximum size of unseriate ray was attained to 27 cell ($550{\mu}$) height in length and 35 microns in width. Fusiform rays were formed occasionally the connected ray which contain one or several horizontal cannals. Branchwood was shown the same features like stemwood but the measured values were very low in comparing with other parts of tree. 3. Trachid length measured among the different parts of tree were shown largest in stem and shortest in branchwood. In comparing the tracheid length among the parts the differences were not shown only between stem and rootwood, but shown between all other parts of tree. Trachid diameters were shown widest in rootwood and narrowest in branchwood, and the differences among the different parts were not realized. Wall thickness were shown largest value in rootwood and smallest in branchwood, and the differences were shown between root and top or branchwood, and between stem and branch or top wood, but not shown between other parts of tree. 4. Moisture contents of green wood were shown highest in topwood and lowest in heartwood of stem. The differences among the different parts were recognized between top or heartwood and other parts of tree, but not between root and branchwood or root and sapwood. 5. Wood specific gravities were shown highest in stem and next order root and branchwood, but lowest in topwood. The differences were shown clearly between stemwood and other parts of tree, but not root and branchwood. However the significant difference is realized as most lowest value in topwood. 6. In compression strength parallel to the grain compared among the different parts of tree at the 14 percent of moisture content, highest strength was appeared in stem, next order branch and rootwood, but lowest in topwood. 7. In bending strength compared among the different parts of tree at the 14 percent of moisture content clearly highest strength was shown in branchwood, next order stem and root, but lowest in topwood. Though the branchwood has lower specific gravity than stemwood it was shown clearly high bending strength.