• Proceedings of the KIEE Conference
• /
• 2008.04c
• /
• pp.59-61
• /
• 2008

Optimal design of the direct-driven PM Wind Generator, combined with DEAS(Dynamic Encoding Algorithm for Searches) and FEM(Finite Element Method), has been proposed to maximize the Annual Energy Production(AEP) over the whole wind speed characterized by the statistical model of wind speed distribution. In particular, DEAS has been contributed to reducing the excessive computing time for the optimization process.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.615_616
• /
• 2009

유한요소해석(Finite Element Analysis)을 통한 풍력발전기 최적설계시, 해석 특성상 발생하는 막대한 소요시간의 개선이 필요하다. 본 논문에서는 연간 에너지 생산량(Annual Energy Production : AEP)의 최대화를 목표로 GA(Genetic Algorithm)와 MADS(Mesh Adaptive Direct Search)를 결합한 혼합 알고리즘을 이용하여 최적설계를 수행하였다. 또한, 혼합 알고리즘과 병렬분산 유전알고리즘을 이용한 최적설계의 해석 소요시간을 비교 및 검토하였다.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.647-648
• /
• 2008

풍력발전기 최적 설계시, 해석특성상 발생하는 막대한 계산 시간문제를 개선하기 위해, 본 논문에서는 최대 연간 에너지 생산량(AEP)을 위한 풍력발전기 최적설계를 빠른 탐색 기법인 MADS(Mesh Adaptive Direct Search)를 기반으로 최적화를 수행하였다. 또한, MADS와, 병렬 분산컴퓨팅 시스템과 결합된 유전알고리즘(Genetic Algorithms)간의 최적화 수행시간을 비교하였다.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2008.04a
• /
• pp.145-148
• /
• 2008

The objective of this study is to analyze and to shed light on the evolutions of factors with the wall structure and their relations with production mechanisms of urban form. this study based on followings; literature review of existing study and setting up of examination factors, analytical review of each wall's current situation and problems, analytical review of each wall's urban regeneration. The significance of this study is in that the study use a contemporary map showing the actual spatial arrangement in the period, instead of using the historical map. We understood the planning methods to interpret the site's historical urban trace and memory. Based on the results, this study presented the solution for the placeless and potential energy.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.25 no.10
• /
• pp.555-561
• /
• 2013

The effects of applying the micro CHP system to the domestic sector in Korea were investigated using annual cooling and heating demand data. Four prime movers, micro gas turbine, PEMFC, gas engine and Stirling engine, were compared for three operational modes. Two way buy-back was assumed for both electricity and heat. The Stirling engine gave the lowest $CO_2$ emission per energy for 300kWh monthly electricity production. However, PEMFC became more effective when considering PURPA criteria. PEMFC generated the least greenhouse gas with higher electrical efficiency for cooling. The Stirling engine, however, became competitive for heating with higher total efficiency.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.485-488
• /
• 2007

Riverbank filtration is a kind of artificial aquifer recharge for the fresh water supply. By construction of several production wells penetrating the riverbank, surface water withdrawn from the river would pass riverbed. This extracted water is well known to be cooler than surface water in summer and warmer than surface water in winter, showing more constant water temperature. This characteristic of extracted water is applied to geothermal energy utilization. Prediction of the annual temperature variation of filtrated water is the major concern in this study. In Daesan-myeon, Changwon-si, Gyeongsangnam-do, South Korea, riverbank filtration facility has been on its operation for municipal water supply and thermal energy utilization since 2006. Appropriate hydraulic and thermal properties were estimated for flow and heat transfer modeling with given pumping rate and location. With the calibrated material properties and boundary conditions, we numerically reproduced measured head and temperature variation with acceptable error range. In the numerical simulation, the change of saturation ratio and river stage caused by rainfall was calculated and the resulting variation of thermal capacity and thermal conductivity was considered. Simulated temperature profiles can be used to assess the possible efficiency of geothermal energy utilization using riverbank filtration facility. Influence of pumping rate, pumping location on the extracted water temperature will be studied.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.58.2-58.2
• /
• 2011

본 연구에서는 5MW급 수평축 풍력터빈 블레이드에 대해 국내 서남해안의 풍속특성을 고려한 최적설계를 수행 하였다. 최적설계를 수행하기 위해 블레이드 해석은 Blade Element and Momentum Theory를 이용 하였으며, 설계 시 적용된 기저형상은 NREL에서 제안한 5MW급 풍력터빈 블레이드을 선정하였다. 최적설계를 수행하기 전 설계에 사용된 설계변수들이 풍속에 대해 어떠한 경향을 가지고 있는지 알아보기 위해 Parametric Study를 수행 하였으며, 최적설계는 다목적 최적화 유전 알고리즘인 NSGA-II를 이용하여 평균풍속이 낮은 서남해안의 연간에너지 생산량과 설비이용률을 최대화하였다. 최적화 결과들로부터 설계 조건에 맞는 최적해를 도출 할 수 있었으며, 이를 통해 기저형상의 연간에너지 생산량 및 설비이용률을 보다 향상 시킬 수 있었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.36.1-36.1
• /
• 2011

풍력개발 기술이 발전함에 따라 풍력발전시스템이 점차 대용량화되는 추세이며, 경제성 있는 풍력단지 건설을 위해 점차 대단지화 되어가고 있는 실정이다. 이로 인해 풍력 발전단가(Cost of electricity, COE)도 개선되고 있다. 풍황이 양호한 풍력발전단지의 경우, 풍력발전 COE는 현재 50~60원/kWh 수준으로 타 신재생에너지원에 비해 경쟁력이 높고, 석탄 화력의 COE와 비교해 봐도 동등한 수준 혹은 더욱 경쟁력 있는 수준으로 감소하였다. 풍력발전단지 조성을 위해서는 시스템의 효율과 고효율, 저비용의 풍력발전시스템을 풍황이 좋은 지역에 설치할 때 낮은 COE를 가지는 경제성 있는 발전단지가 가능하다. 동급 용량 풍력발전시스템을 같은 지역에서 설치하여 에너지생산량을 증대시키기 위해서는 블레이드 지름의 증가시켜 유량을 증가시키거나 타워의 높이를 증가시켜 풍속을 증가시키는 방안이 있다. 이 경우 블레이드 길이와 타워 높이 증가에 의한 시스템 비용의 증가가 발생하는데, 에너지생산량 증가에 의한 수익비용과 시스템 비용 증가에 의한 자본비용은 서로 반비례로 영향을 미친다. 이를 위해 최소의 COE의 최대의 순현재가치(Net Present Value, NPV)를 갖는 목적함수로 두고 블레이드의 최적 길이와 타워의 최적 높이를 선정하였다.

• Geomechanics and Engineering
• /
• v.17 no.2
• /
• pp.207-214
• /
• 2019

Dams have a great importance on energy and irrigation. Dams must be evaluated statically and dynamically even after construction. For this purpose, Torul dam built between years 2000 and 2007 Harsit River in Gümüşhane province, Turkey, is selected as an application. The Torul dam has 137 m height and 322 GWh annual energy production capacity. Torul dam is a kind of concrete face rock fill dam (CFRD). In this study, static and pseudo seismic stability of Torul dam was investigated using finite element method. Torul dam model is constituted by numerical stress analysis named Phase2 which is based on finite element method. The dam was examined under 11 different water filling levels. Thirteenth stage of the numerical model is corresponding full reservoir condition which water filled up under crest line. Besides, pseudo static coefficients for dynamic condition applied to the dam in fourteenth stage of the model. Stability assessment of the Torul dam has been discussed according to the displacement throughout the dam body. For static and pseudo seismic cases, the displacements in the dam body have been compared. The total displacements of the dam according to its the empty state increase dramatically at the height of the water level of about 70 m and above. Compared to the pseudo-seismic analysis, the displacement of dam at the full reservoir condition is approximately two times as high as static analysis.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.27 no.3
• /
• pp.221-227
• /
• 2022

The reliability improvement of PV systems is an important factor in reducing the cost of PV energy because it is closely related to the annual energy production as well as the maintenance cost of PV systems. The reliability of PV inverters plays a key role in the reliability of PV systems because it is regarded as one of the most reliable critical parts of PV systems. The lifetime evaluation of PV inverters considering the mission profile in the design phase plays an important role in reliability design to ensure the required lifetime of PV inverters. In this paper, the lifetime of representative single-phase T-type and I-type NPC inverters are comparatively evaluated by considering the mission profile of a PV system recorded at Iza, Spain. Furthermore, the effect of the pulse width modulation methods on the lifetime is also discussed. The lifetime evaluation of PV inverters is performed at the component-level first and then the system level by considering all power devices.