• Nuclear Engineering and Technology
• /
• 제34권3호
• /
• pp.232-241
• /
• 2002

A safety assessment is carried out for the near-surface radioactive waste disposal in the reference engineered vault facility. The analysis is mainly divided into two parts. One deals with the release and transport of radionuclide in the vault and unsaturated zone. The other deals with the transport of radionuclide in the saturated zone and radiological impacts to a human group under well drinking water scenario. The parameters for source-term, geosphere and biosphere models are mainly obtained from the site specific data. The results show that the annual effective doses are dominated by long lived, mobile radionuclides and their associated daughters. And it is found that the total effective dose for drinking water is far below the general criteria of regulatory limit for radioactive waste disposal facility.

• 방사선산업학회지
• /
• 제8권2호
• /
• pp.123-132
• /
• 2014

After the nuclear accident of the Fukushima Dai-ichi Nuclear Power Plants (FDNPPs) on 11 March 2011, a large amount of radioactive materials has been released into the atmosphere and the ocean. A compartment model is used to evaluate the circulation characteristics and the spatiotemporal concentration distributions of radionuclides in the ocean. In the comparison with observed concentrations of $^{137}Cs$ in seawater, calculated concentrations by the compartment model were well agreed with them. On the basis of these results, we performed evaluation of the effective dose and the cancer risk. In the early stage of the accident, the effective doses from ingestion of the seafood near the Fukushima region were much higher than 1 mSv which is the value of the annual effective dose limit to individual recommended by the International Commission on Radiological Protection (ICRP). However, the effective doses by ingestion of the seafood decreased below 1 mSv as distance from the FDNPPs increased and time passed. In addition, it was estimated that the cancer risks by intake of the contaminated marine products were less than natural occurrence probability of cancer. Consequently, it was inferred that the health risk due to the $^{137}Cs$ was low after since mid-term period of the accident.

• Nuclear Engineering and Technology
• /
• 제54권7호
• /
• pp.2614-2624
• /
• 2022

Monte Carlo simulations were used to model a portable Neutron backscattering (NBT) sensor suitable for detecting plastic anti-personnel mines (APMs) buried in dry and moist soils. The model consists of a 100 MBq ²⁵²Cf source encapsulated in a neutron reflector/shield assembly and centered between two ³He detectors. Multi-parameter optimization was performed to investigate the efficiency of Be/Zr(BH₄)₄ and Be/Be(BH₄)₂ assemblies in terms of increasing the signal-to-background (S/B) ratio and reducing the total dose equivalent rate. The MCNP results showed that 2 cm Be/3 cm Zr(BH₄)₄ and 2 cm Be/3 cm Be(BH₄)₂ are the optimal configurations. However, due to portability requirements and abundance of Be, the ²⁵²Cf-2 cm Be/3 cm Be(BH₄)₂ NBT model was selected to scan the center of APM buried 3 cm deep in dry and moist soils. The selected NBT model has positively identified the APM with a S/B ratio of 886 for dry soils of 1 wt% hydrogen content and with S/B ratios of 615, 398, 86, and 12 for the moist soils containing 4, 6, 10, and 14 wt% hydrogen, respectively. The total dose equivalent rate reached 0.0031 mSv/h, suggesting a work load of 8 h/day for 806 days within the permissible annual dose limit of 20 mSv.

• 방사성폐기물학회지
• /
• 제17권1호
• /
• pp.107-120
• /
• 2019

다수호기 부지에 위치한 원전의 해체는 인근에 위치한 운영중인 원전으로 인해 작업자에게 추가적인 방사선 피폭 위험을 야기할 수 있다. 따라서 인근의 운영중인 다수호기 원전에 의한 해체 작업자에 대한 피폭 선량 평가가 필요하다. ENDOS프로그램은 한국원자력연구원(KAERI)에서 개발된 선량평가 전산코드로, 하위 프로그램으로 대기 확산 평가 프로그램인 ENDOS-ATM과 기체 방사성 배출물에 의한 피폭 선량 계산을 수행하는 ENDOS-G가 있다. 이 프로그램들을 이용하여 고리 1호기 해체작업자에 대한 다수호기 원전 운영에 의한 피폭 선량을 계산한 결과, $2.31{\times}10^{-3}mSv{\cdot}y^{-1}$로 일반인에 대한 피폭선량 기준치인 $1mSv{\cdot}y^{-1}$에 비교해 보았을때 큰 영향이 없을 것이라는 판단에 도달할 수 있었다. 앞으로 예상되는 국내 해체 원전의 경우 모두 다수호기 부지에 위치하여 이 연구 방법과 결과가 활용될 수 있을 것이라고 기대한다.

• 한국산학기술학회논문지
• /
• 제10권7호
• /
• pp.1760-1765
• /
• 2009

의료기관 핵의학과에서는 진단과 치료를 목적으로 방사성동위원소를 사용하므로 누구나 방사선피폭에 노출 될 위험이 있다. 일반적으로 방사선 작업종사자에 대한 피폭관리는 비교적 철저히 이루어지고 있으나 환자보호자 및 일반인에 대한 피폭관리는 소홀한 경향이 있다. 특히 방사성의약품을 투여한 환자들은 잠재적 선원이 되어 작업종사자외에 환자보호자 및 일반인에 대해 방사선피폭을 초래하므로 이로 인한 방사선피폭을 최소한으로 감소시킬 수 있도록 관리되어야 한다. 따라서 핵의학과 방사선피폭에 대한 관리실태를 파악하기 위하여 전국에 있는 대학병원 중 7개소에 대해 조사한 결과 환자이송요원, 환경미화원 등 수시출입자에 대해서 2 개소의 의료기관에서는 피폭선량평가 및 관리와 안전교육이 없었다. 또한 환자와 동행하는 보호자에 대한 통제와 관리는 7 개소 모두 허술하였는데 대기실에서 검사직전 환자로부터 흡수될 수 있는 평균 방사선량률은 25.60 ${\mu}$Sv/h로서 일반인에 대해 연간 선량한도를 초과하지 아니하는 범위 내에서 허용되는 20 ${\mu}$Sv/h를 초과하였다. 따라서 비록 아주 적은 피폭선량이 예상된다고 하더라도 수시출입자에 대한 철저한 피폭선량의 관리와 교육이 요구되며, 환자보호자 등을 보호하기 위해 환자와 가까이 하는 것을 통제하거나 환자를 격리할 필요가 있었다.

• 한국방사선학회논문지
• /
• 제13권4호
• /
• pp.653-659
• /
• 2019

본 연구는 고용량 $^{131}I$ 치료 후 방사선원이 된 퇴원 환자로부터 나오는 방사선 피폭에 관해 외부 선량률을 측정하고, 그에 따른 피폭선량을 예측하는 것이 목적이다. 200 mCi 이상 고용량 $^{131}I$ 치료를 받은 30명의 환자에서 구리링 3개를 이용하여 환자로부터 거리 및 방위각에 따른 선량평가를 시행하였다. 정확한 방사선 계측을 위하여 GM 계측기를 이용하여 2명의 측정자가 방위각 8 포인트와 거리 변화를 주며 계측하였다. 측정값을 기반으로 3가지 예측 시뮬레이션을 설정하여 불특정 다수 일반인에 대한 피폭선량을 계산하였다. 1m 높이에서 방위각에 따른 외부 선량률이 가장 높은 부위는 0도이다. 거리에 따른 선량률은 거리별 방위각의 선량률 평균값을 사용하였다. 거리에 따른 외부 선량률의 최고치는 50, 100, 150 cm에서 각각 $214{\pm}16.5$, $59{\pm}9.1{\mu}Sv/h$, $38{\pm}5.8{\mu}Sv/h$ 이다. 고용량 $^{131}I$ 치료 환자가 대중교통을 이용해서 5시간 이동할 때 반경 50 cm 지점의 옆좌석에 안은 불특정 일반인이 받을 수 있는 피폭선량은 1.14 mSv이다. 소변 통(urin bag)을 착용한 퇴원환자로부터 100 cm 거리에서 4일 동안 간병인이 받을 수 있는 최대 피폭선량은 6.5 mSv이다. 퇴원 환자 귀가로 인해 7일 동안 150 cm 거리에서 보호자가 받을 수 있는 최대 피폭선량은 1.08 mSv이다. 개발된 예측 모델링으로 불특정 $^{131}I$ 치료 환자의 주변 일반인에게 적용하였을 때 연간 선량 한도를 단시간에 초과하는 수준이었다. 따라서 본 연구를 통해 현행 고용량 $^{131}I$ 치료 환자의 퇴원 후 주변의 일반인의 방호체계의 합리적인 가이드라인을 제시하는 데 도움을 줄 수 있을 것으로 사료된다.

• 한국산업보건학회지
• /
• 제27권1호
• /
• pp.38-45
• /
• 2017

Objectives: Radon may be second only to smoking as a cause of lung cancer. Radon is a colorless, tasteless radioactive gas that is formed via the radioactive decay of radium. Therefore, radon levels can build up based on the amount of radium contained in construction materials such as phospho-gypsum board or when ventilation rates are low. This study provides our findings from evaluation of radon gas at facilities and offices in an industrial complex. Methods: We evaluated the office rooms and processes of 12 manufacturing factories from May 14, 2014 to September 23, 2014. Short-term data were measured by using real-time monitoring detectors(Model 1030, Sun Nuclear Co., USA) indoors in the office buildings. The radon measurements were recorded at 30-minute intervals over approximately 48 hours. The limit of detection of this instrument is $3.7Bq/m^3$. Also, long-term data were measured by using ${\alpha}-track$ radon detectors(${\alpha}-track$, Rn-tech Co., Korea) in the office and factory buildings. Our detectors were exposed for over 90 days, resulting in a minimum detectable concentration of $7.4Bq/m^3$. Detectors were placed 150-220 cm above the floor. Results: Radon concentrations averaged $20.6{\pm}17.0Bq/m^3$($3.7-115.8Bq/m^3$) in the overall area. The monthly mean concentration of radon by building materials were in the order of gypsum>concrete>cement. Radon concentrations were measured using ${\alpha}-track$ in parallel with direct-reading radon detectors and the two metric methods for radon monitoring were compared. A t-test for the two sampling methods showed that there is no difference between the average radon concentrations(p<0.05). Most of the office buildings did not have central air-conditioning, but several rooms had window- or ceiling-mounted units. Employees could also open windows. The first, second and third floors were used mainly for office work. Conclusions: Radon levels measured during this assessment in the office rooms of buildings and processes in factories were well below the ICRP reference level of $1,000Bq/m^3$ for workplaces and also below the lower USEPA residential guideline of $148Bq/m^3$. The range of indoor annual effective dose due to radon exposure for workers working in the office and factory buildings was 0.01 to 1.45 mSv/yr. Construction materials such as phospho-gypsum board, concrete and cement were the main emission sources for workers' exposure.

• 방사성폐기물학회지
• /
• 제16권4호
• /
• pp.473-478
• /
• 2018

원전 해체 공정 중 절단 및 용융작업에서 발생되는 방사성 에어로졸은 작업종사자의 호흡을 통해 내부 피폭을 유발하게 된다. 이에 따라 해체 중 방사성 에어로졸로 인한 작업종사자의 내부피폭 평가가 필요한 실정이다. 정확한 내부피폭평가를 위해서는 작업종사자의 작업환경 실측값이 필요하지만 실측에 어려움이 있을 시에는 국제방사선방호위원회(ICRP)에서 제시하는 섭취량 분율 및 입자 크기 등의 권고 값을 통해 내부피폭선량을 추정할 수 있다. 본 논문에서는 입자 크기의 선정은 ICRP에서 권고하는 작업종사자의 고려 입자 크기인 $5{\mu}m$을 적용하였다. 발생량의 경우, 불가리아의 Kozloduy 부지 내의 용융시설에서 발생 된 에어로졸의 포집량 데이터를 이용하여 섭취량을 산정하였다. 또한 이를 이용해 작업종사자의 체내 및 배설물에서의 방사능 수치를 계산하고 BiDAS 전산코드를 통해 내부피폭 평가를 수행하였다. Type M이 0.0341 mSv, Type S가 0.0909 mSv로 두 흡수 형태 각각 국내 연간 선량 한도의 0.17%, 0.45% 수준을 나타내었다.

• Nuclear Engineering and Technology
• /
• 제39권6호
• /
• pp.747-752
• /
• 2007

The Proton Engineering Frontier Project (PEFP) has designed and developed a proton linear accelerator facility operating at 100 MeV - 20 mA. The radiological effects of such a nuclear facility on the environment are important in terms of radiation safety. This study estimated the production rates of radionuclides in the soil around the accelerator facility using MCNPX. The groundwater migration of the radioisotopes was also calculated using the Concentration Model. Several spallation reactions have occurred due to leaked neutrons, leading to the release of various radionuclides into the soil. The total activity of the induced radionuclides is approximately $2.98{\times}10^{-4}Bq/cm^3$ at the point of saturation. $^{45}Ca$ had the highest production rate with a specific activity of $1.78{\times}10^{-4}Bq/cm^3$ over the course of one year. $^3H$ and $^{22}Na$ are usually considered the most important radioisotopes at nuclear facilities. However, only a small amount of tritium was produced around this facility, as the energy of most neutrons is below the threshold of the predominant reactions for producing tritium: $^{16}O(n,\;X)^3H$ and $^{28}Si(n,X)^3H$ (approximately 20 MeV). The dose level of drinking water from $^{22}Na$ was $1.48{\times}10^{-5}$ pCi/ml/yr, which was less than the annual intake limit in the regulations.

• Asian-Australasian Journal of Animal Sciences
• /
• 제29권8호
• /
• pp.1188-1196
• /
• 2016

This study evaluated the risk of Clostridium perfringens (C. perfringens) foodborne illness from natural and processed cheeses. Microbial risk assessment in this study was conducted according to four steps: hazard identification, hazard characterization, exposure assessment, and risk characterization. The hazard identification of C. perfringens on cheese was identified through literature, and dose response models were utilized for hazard characterization of the pathogen. For exposure assessment, the prevalence of C. perfringens, storage temperatures, storage time, and annual amounts of cheese consumption were surveyed. Eventually, a simulation model was developed using the collected data and the simulation result was used to estimate the probability of C. perfringens foodborne illness by cheese consumption with @RISK. C. perfringens was determined to be low risk on cheese based on hazard identification, and the exponential model ($r=1.82{\times}10^{-11}$) was deemed appropriate for hazard characterization. Annual amounts of natural and processed cheese consumption were $12.40{\pm}19.43g$ and $19.46{\pm}14.39g$, respectively. Since the contamination levels of C. perfringens on natural (0.30 Log CFU/g) and processed cheeses (0.45 Log CFU/g) were below the detection limit, the initial contamination levels of natural and processed cheeses were estimated by beta distribution (${\alpha}1=1$, ${\alpha}2=91$; ${\alpha}1=1$, ${\alpha}2=309$)${\times}$uniform distribution (a = 0, b = 2; a = 0, b = 2.8) to be -2.35 and -2.73 Log CFU/g, respectively. Moreover, no growth of C. perfringens was observed for exposure assessment to simulated conditions of distribution and storage. These data were used for risk characterization by a simulation model, and the mean values of the probability of C. perfringens foodborne illness by cheese consumption per person per day for natural and processed cheeses were $9.57{\times}10^{-14}$ and $3.58{\times}10^{-14}$, respectively. These results indicate that probability of C. perfringens foodborne illness by consumption cheese is low, and it can be used to establish microbial criteria for C. perfringens on natural and processed cheeses.