• Journal of Environmental Science International
• /
• v.22 no.12
• /
• pp.1599-1610
• /
• 2013

In order to verify the healing effect in the variety of effects according to fountain type, anion which is the representatives factor of healing, as the center of case studies which in Gwanghwamun(Ground fountain), Cheonggyecheon(Waterfall) and Myeongdong(Formative fountain). According to fountain type, the anion distribution as follow, figures typically$ 15,721{\pm}419ea/cm^3$, Formative fountain $40,190{\pm}788ea/cm^3$, Waterfall $4.480{\pm}290ea/cm^3$ and ground fountain $2.492{\pm}180ea/cm^3$. It is usually exceed to the distribution in natural green, which is $1070{\sim}2100ea/cm^3$. The interrelation between air temperature, relative humidity, wind speed and relative humidity, and wind speed is that, the relative humidity is directly proportional to wind speed and inversely proportional to temperature. As the temperature goes up, the distribution of anion goes down. And as the wind speed and relative humidity goes up, the distribution of anion decrease sharply. The result of interrelation between fountain type and the anion distribution is that, the distance of water falling is directly proportional to the anion distribution in the formative fountain and inversely proportional in the ground fountain. And the distribution of anion is largest in formative fountain. The distribution of anion in ground fountain is lower than in formative fountain, but it is far more than in natural greenery. And as the distance from fountain increase, the distribution of anion goes down.

• Journal of Environmental Science International
• /
• v.23 no.7
• /
• pp.1339-1347
• /
• 2014

This study were performed on roadside buffer green in Songpa-dong, Songpa-gu, Seoul in order to analyze the anion concentration according to the type of composition of roadside buffer green. Buffer green separating the physical structure of the measurement points and measurement locations were separated by roadside, green interior, the other side of the road. planting density and deposit of trees per each buffer green was measured in the order of mounding type> slope type> the plain type. If the measured temperature of the location-specific weather elements roadside> inside> the other side of the road in order of measurement and the temperature is lowered farther away from the road. If the relative humidity of the road on the other side> inside> the roadside in order to measure and this is the opposite of the temperature tendency. According to physical structure reduction of the temperature on the other side of the road and roadside in order of mounding type> the plain type> slope type was measured. As a result of measuring a anion therefore concentration of the anion inside of melt is in order of mounding type> the plain type> slope type, tended to match the melt characteristics. According to measured positions anion concentration is in the order of the other side of the road> inside> the roadside was measured. As a result of correlation analysis, in the case of measurement location-specific weather and anions the temperature is positive correlation, relative humidity is negative correlation and that's results of previous studies were supported.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.2
• /
• pp.118-123
• /
• 2010

The eco-friendly technologies have been extended as matter of international concern due to various diseases and syndromes according to an environmental pollution. In this study, we have manufactured a ceramic cluster with thick film type for anion generation equipment which is maximized anion but minimized ozone contents generated. To develop the formulation of ceramic cluster, we conducted the $Mg_2SiO_4$ powders doped with 10 vol% glass frits as Na-Zn-B-O system and sintered at $1050^{\circ}C$ for 2 hours in air for starting materials and investigated the matching properties between the Ag-Pd electrode and the starting materials. The sintered sample for the composition of cluster has 6.7 of dielectric constant and 32 kV/mm of withstand voltage. The yield of anions was measured according to an electrode pattering, discharge gap between electrode, and thickness of electrode protective layer in the cluster of thick film type. We have manufactured the ceramic clusters with optimized thick film structure that have an anion over a hundred particles and the ozone of 0.6 ppb generated.

• Journal of environmental and Sanitary engineering
• /
• v.12 no.1
• /
• pp.15-23
• /
• 1997

The anionic exchange resins with the Dowex-1 and Amberlite CG-400 form were transformed into resin of sulfate and acetate acid form, respectively. The uranyl complex ions with SO$_{4}$$^{2-}$ and CH$_{3}$COO$^{-}$ were adsorbed on the anion exchange resion mentioned above, and these complex ions were eluted as mixture eluents of 0.7M HNO$_{3}$ - 0.5M NH$_{4}$NO$_{3}$ by anion exchange chromatography. The optimum adsorption conditions of uranyl anion complex ions adsorbed on the upper of the resin colmun were 1.5-2.0 ml/min of flow rates at pH 2.0 and adsorptive power of uranyl complex ion of sulfuric acid type were nearly consistent with the Caussion normal distribution curve, whereas the elution state of UO$_{2}$(Ac)$_{2}$$^{4-}$ with acetic acid type was departed. The weighing form obtained from resin of sulfuric acid and aceric acid type was U$_{3}$O$_{8}$ whose recovery was 91.7%. The possibility of recovering uranium from the monazite sulfate solution using a strong base anion resin, Amberlite CG-400(sulfate form), was successfully recovered more than 90%.

• Journal of Environmental Science International
• /
• v.7 no.1
• /
• pp.89-95
• /
• 1998

Ion exchange performance to remove nitrate in water was studied using commercially available strong base anion exchange resin of Cl- type in the batch and continuous column reactors. The performance was tested using the effluent concentration histories for continuous column or equilibrium conquilibrium between resin and solution. Anion exchange resin used in this study was more effective than activated carbon or zeolite for nitrate removal. With large resin amount or low initial concentration, nitrate removal characteristics for a typical gel-type resin was Increased. On considering the relation between the breakthrough capacity and nitrate concentration of the influent, the use of anion exchange resin were suitable for the hi선or order water treatment. The nitrate removal of above 90% could be possible until the effluent of above 650 BV was passed to the column. Thus, the commercially available strong base anion exchange resin of $Cl^-$ type used in thins study could be effectively used as economic material for treatment of the groundwater. The breakthrough curves showed the sequence of resin selectivity as $SO_4^{2-}$ > $NO_3$ > $NO^{2-}$ > $HCO_3^-$. The results of this study could be scaled up and used as a design tool for the water purification system of the real groundwater and surface water treatment processes.

• Korean Journal of Environment and Ecology
• /
• v.24 no.5
• /
• pp.539-546
• /
• 2010

To investigate the variation of anion concentrations in relation to forest type, forest-related factors, forest survey and anion concentrations measurement were carried out on the 52 quadrats located at the national forest areas in Yangyang-gun, Kangwon-do. The relationship between anion concentrations and forest-related factors were correlated. Total mean of anion concentration was 2,405 ea/$cm^3$, which was slightly higher than general figures 2,000ea/$cm^3$. Highly significant positive correlations were observed between anion concentrations and soil moisture contents, and also between anion concentrations and altitude. Significant positive correlations were observed between anion concentrations and topography. Anion concentrations were significantly different among soil moisture levels. Mean anion concentration were highest at 4,524.4ea/$cm^3$ in on wet sites, and followed slightly wet sites and moderate sites. Mean anion concentrations was highest on valley sites at 3,372.4ea/$cm^3$, followed by slope and ridge areas. Mean anion concentrations measured before noon was highest at 3,133.4ea/$cm^3$, and measurements during 12:00~15:00 and after 15:00, showed relatively low anion concentrations. Mean anion concentrations was highest at mixed deciduous forests at 3,503.9ea/$cm^3$, followed by oak forests, pine forests, and pine-oak forests. Results of this study are expected to be used in planning therapeutic forests.

• Journal of Korean Society for Atmospheric Environment
• /
• v.13 no.1
• /
• pp.1-7
• /
• 1997

Anion concentrations and distributions of airborne fine particles less than 2 $\mu$m in urban atmosphere were determined from Feb. 5 to 16, 1996. The sampling was carried out using 8 stages Hering's low pressure impactor (LPI, aerodynamic cutoff diameters are 0.05, 0.075, 0.11, 0.26, 0.50, 1.0, 2.0, and 4.0$\mu$m) on the top of a five-story building located at Kon-Kuk university in Seoul. Average concentrations if C $l^{[-10]}$ , N $O_3$$^{[-10]}$ and S $O_4$$^{2-}$ were 9.4, 8.4, and 14.5 $\mu\textrm{g}$/㎥, respectively. The distributions of these anion concentrations were bimodal types which showed two peaks in the range of 0.075~0.12 ${\mu}{\textrm}{m}$ and 0.5~1 ${\mu}{\textrm}{m}$ in aerodynamic diameter. These results were 2.5~4.7 times higher than anion concentrations collected by Anderson low volume air sampler.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.12
• /
• pp.3089-3091
• /
• 2009

• Geomechanics and Engineering
• /
• v.7 no.2
• /
• pp.183-200
• /
• 2014

The expansivity of clayey soils is a complicated phenomenon which may affect the stability of geotechnical structures and geo-environmental projects. In all common factors for the monitoring of soil expansion, less attention is given to anion type of pore space solutions. Therefore, this paper is concerned with the impact of various concentrations of different inorganic salts including NaCl, $Na_2SO_4$, and $Na_2CO_3$ on the macro and microstructure behavior of the expandable smectite clay. Comparison of the responses of the smectite/NaCl and smectite/$Na_2SO_4$ mixtures indicates that the effect of anion valance on the soil engineering properties is not very pronounced, regardless of the electrolyte concentration. However, at presence of carbonate as potential determining ions (PDIs) the swelling power increases up to 1.5 times compared to sulfate or chloride ions. The samples with $Na_2CO_3$ are also more deformable and show lower osmotic compressibility than the other mixtures. This demonstrates that the barrier performance of smectite greatly decreases in case of anions with the non-specific adsorption (e.g., $Cl^-$ and $SO{_4}^{2-}$) as the salinity of solution increases. Based on the results of the X-ray diffraction and sedimentation tests, the high soil volumetric changes upon exposure to carbonate is attributed to an increase in the repulsive forces between smectite basic unit layers due to the PDI effect of $CO{_3}^{2-}$ and increasing the pH level which enhance the buffering capacity of smectite. The study concluded that the nature of anion through its influence on the re-arrangement of soil microstructure and osmotic phenomena governs the hydro-mechanical parameters of expansive clays. It seems not coinciding with the double layer theory of the Gouy-Chapman double layer model.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2001.05a
• /
• pp.51-54
• /
• 2001