• 한국정밀공학회지
• /
• 제19권7호
• /
• pp.71-79
• /
• 2002

A new rapid prototyping process, Variable Lamination Manufacturing using a 4-axis-controlled hotwire cutter and expandable polystyrene foam sheet as a laminating material of the part (VLM-S), has been developed to reduce building time and to improve the surface finish of parts. The objective of this study is to reconstruct the surface of the original 3D CAD model in order to generate mid-slice data using the advancing front technique. The generation of 3D layers by a 4 axis-controlled hot-wire cutter requires a completely different procedure to generate toolpath data unlike the conventional RP CAD systems. The cutting path data for VLM-S are created by VLM-Slicer, which is a special CAD/CAM software with automatic generation of 3D toolpath. For the conventional sheet type system like LOM, the STL file would be sliced into 2D data only. However, because of using the thick layers and a sloping edge with the firstorder approximation between the top and bottom layers, VLM-Slicer requires surface reconstruction, mid-slice, and the toolpath data generation as well as 2D slicing. Surface reconstruction demands the connection between the two neighboring cross-sectional contours using the triangular facets. VLM-S employs thick layers with finite thickness, so that surface reconstruction is necessary to obtain a sloping angle of a side surface and the point data at a half of the sheet thickness. In the process of the toolpath data generation the surface reconstruction algorithm is expected to minimize the error between the ruled surface and the original parts..

• 한국인터넷방송통신학회논문지
• /
• 제17권5호
• /
• pp.143-150
• /
• 2017

본 논문에서는 스마트 폰 추적 및 색상 통신을 이용한 새로운 동작인식 플랫폼을 개발한다. 카메라가 탑재된 PC 혹은 스마트 TV와 개인 스마트 폰 가지고 영상을 기반으로 한 객체 인식 기술을 이용하여 동작 인식 유저 인터페이스를 제공한다. 사용자는 손으로 스마트 폰을 움직여 모션 컨트롤러처럼 사용할 수 있으며, 플랫폼에서는 이 스마트폰을 실시간으로 검출하고, 3차원 거리와 각도를 추정하여 사용자의 동작을 인식한다. 또한, 스마트 폰과 서버의 통신을 위하여 색상 디지털 코드를 이용한 통신 시스템이 사용된다. 사용자들은 색상 통신 방법을 이용하여 텍스트 데이터를 자유자재로 주고받을 수 있으며, 동작을 취하는 도중에도 끊임없이 데이터를 전송할 수 있다. 제안한 동작인식 플랫폼 기반의 실행 가능한 콘텐츠를 구현하여 결과를 제시한다.

• 대한기계학회논문집B
• /
• 제25권11호
• /
• pp.1459-1466
• /
• 2001

A slip factor is defined as an empirical factor, which should be multiplied to theoretical energy transfer to estimate real work input of a centrifugal compressor. During the last century, researchers have tried to develop simple empirical models to predict the slip factor. However most of these models have been developed based only on design point data. Furthermore flow is assumed inviscid. As a result, these models often fail to predict the correct slip factor at off-design condition. In this study, various models for the slip factor were analysed and compared with experimental and numerical data at off-design conditions. As a result of this study, Wiesner's and Paeng and Chung's models are shown to be applicable for radial impeller, but all the models are found to be inappropriate for backswept impellers.

• 대한기계학회논문집B
• /
• 제25권12호
• /
• pp.1802-1812
• /
• 2001

The purpose of this study is to analyze numerically the movement of particles included in turbulent fluid flow characteristics of metallic surfaces. To describe fluid flew, the incompressible Navier-Stokes equation discretized by the finite volume method were solved on the non-orthogonal coordinates with non-staggered variable arrangement, and the k-$\xi$ turbulence model was adapted. After fluid flow was calculated, particle movement was predicted from the Lagrangian approaches. Non-essential complexities were avoided by assuming that the particles had spherical shapes and the Stoke's drag formula only consisted of external farces acting upon them. In order to validate the numerical calculations, the results were compared with the experimental data reported in literature and agreed well with them. The drag force coefficient equation showed better agreement with the experimental data in the prediction of particle movement than the correction factor equation. Impact velocity and impact angle increased as inlet turbulence intensity decreased, relative jet height was lower. or the Reynolds number was larger.

• 전력전자학회논문지
• /
• 제5권4호
• /
• pp.343-351
• /
• 2000

본 논문에서는 정렬과 비정렬된 회전자 위치들에서 자화곡선들을 기본으로 한 SRM의 회전자 워치펑가 알고리즘을 제안한다. 자화곡선은 측정된 상 전압과 상 전류로부터 계산되어지고, 계산된 데이타는 회전자 위치검출을 위한 자화곡선의 입력으로 사용되어진다. 자화곡선은 비션형 특성해석에 적합한 퍼지 알고리즘으로 구생되어졌다. 종래의 지삭기반 퍼지제어기를 이용한 자속관측기가 SRM의 센서리스 제어를 얻기 위해 제시되었다. 최적 각을 선정하기 위한 방식이 회전자 위치검출을 위해 제시되었다. 제안된 알고리즘의 강인성이 시뮬레이션과 실험결과의 비교를 통해 입증되었다.

• 오토저널
• /
• 제10권6호
• /
• pp.72-84
• /
• 1988

Engine performance is one of the main objectives specified at the beginning of a new engine design project. The cycle simulation for SI engine is based on the zero-dimensional gas exchange model and a heat release expression by Viebe. This program also requires minimum input data and takes only a short time to run. Heat transfer from cylinder transfer formula. The flow coefficient (effective area) is calculated from valve lift using the standard flow coefficient curve and engine friction is calculated from the Millington and Hartles' engine friction formula. The chemical species considered in burned gas are 6 species CO, CO, H$_{2}$, H$_{2}$O, $O_{2}$, N$_{2}$ and the cylinder pressure, homogeneous cylinder temperature, gas composition and burned fraction are calculated at each crank angle through the cycle. To check the validity and accuracy, experimental study was done with 3 engines for measuring cylinder pressure, indicated mean effective pressure, brake mean effective pressure and air flow rate, etc. Despite its simple assumptions, cycle simulation showes excellent breathing and performance correlation when compared with data of tested engines, and have been proved useful in engine design.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권12호
• /
• pp.5442-5463
• /
• 2016

Designing efficient routing protocols for a wireless sensor network with mobile sinks (mWSN) is a challenging task since the network topology and data paths change frequently as sink nodes move. In this paper, we design a novel lightweight reactive ring based routing protocol called R3, which removes the need of proactively maintaining data paths to mobile sinks as they move in the network. To achieve high packet delivery ratio and low transmission cost, R3 combines ring based forwarding and trail based forwarding together. To support efficient ring based forwarding, we build a ring based structure for a network in a way such that each node in the network can easily obtain its ring ID and virtual angle information. For this purpose, we artificially create a virtual hole in the central area of the network and accordingly find a shortest cycled path enclosing the hole, which serves as base ring and is used for generating the remaining ring based structure. We accordingly present the detailed design description for R3, which only requires each node to keep very limited routing information. We derive the communication overhead by ring based forwarding. Extensive simulation results show that R3 can achieve high routing performance as compared with existing work.

• 한국통신학회논문지
• /
• 제29권3A호
• /
• pp.233-239
• /
• 2004

공간 필터링 시스템은 시ㆍ공간 벡터 채널 특성에 의해 그 성능과 용량이 영향을 밭는다. 본 논문에서는 배열안테나를 이용하여 국내 대도시 환경에서 측정을 수행하고 측정된 데이터를 이용하여 대도시 환경에서의 시ㆍ공간 벡터 채널을 분석하였다. 분석 결과 국내와 같이 높은 건물이 많은 대도시 환경에서는 셀 안에 사용자가 균일하게 분포되어 있더라도 기지국에 수신되는 신호는 도로 방향이나 상가 방향에서 집중되어 수신되었으며, 사용자가 한 방향에서 다른 방향으로 점진적으로 이동할 때 수신되는 신호의 방향은 사용자의 이동에 의해 점진적으로 변하지 않고 한 방향에서 다른 방향으로 급격하게 점프되어 변함을 알 수 있었다.

• Nuclear Engineering and Technology
• /
• 제48권5호
• /
• pp.1280-1290
• /
• 2016

This paper presents an advanced estimation method for obtaining the probability density functions of a damage parameter for valve leakage detection in a reciprocating pump. The estimation method is based on a comparison of model data which are simulated by using a mathematical model, and experimental data which are measured on the inside and outside of the reciprocating pump in operation. The mathematical model, which is simplified and extended on the basis of previous models, describes not only the normal state of the pump, but also its abnormal state caused by valve leakage. The pressure in the cylinder is expressed as a function of the crankshaft angle, and an additional volume flow rate due to the valve leakage is quantified by a damage parameter in the mathematical model. The change in the cylinder pressure profiles due to the suction valve leakage is noticeable in the compression and expansion modes of the pump. The damage parameter value over 300 cycles is calculated in two ways, considering advance or delay in the opening and closing angles of the discharge valves. The probability density functions of the damage parameter are compared for diagnosis and prognosis on the basis of the probabilistic features of valve leakage.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2005년도 동계학술발표대회 논문집
• /
• pp.306-310
• /
• 2005

The air-side particulate fouling in the heat exchangers of HVAC applications degrades the performance of cooling capacity, pressure drop across a heat exchanger, and indoor air quality. Indoor and outdoor air contaminants foul heat exchangers. An empirical modeling equation is derived from the experimental results using accelerated tests and it shows good predictions of the fouling characteristics of the slitted finned tube heat exchangers. However the modeling equation predicts only the fouling characteristics of new heat exchangers and it can not predicts fouling characteristics obtained from actual field data. The purpose of this study is to modify the previous modeling equation using the actual field data Therefore an modified modeling equation is proposed and it shows good predictions of the actual fouling characteristics of finned-tube heat exchangers.